Sharing USB on Windows 7 printer will not print until the system reboots
I have a HP Color LaserJet 1600 printer attached to my system Windows 7 x 64 via USB. Printing from the local computer is fine.
However, when I add the shared printer on another machine in my homegroup and print for her, the job appears in the print queue (visible from both the native system as the computer to which the printer is connected) but nothing prints. Attempt to delete just print job gives the status of "Delete", but the work is never removed from the queue. When restarting the system (to which the printer is hung up), the job prints (even if a deletion was attempted).
Specifics:
Machine 1: Windows 7 x 64 with USB LaserJet 1600 (with x 64 and x 86 drivers).
Directly connected to the Linksys router.
Machine 2: Windows 7 x 86 with LaserJet 1600 x 86 drivers installed.
Wireless connection to the Linksys router.
None of this behavior has been observed when we were using Vista, x 64, and x 86 on both machines.
Uncheck Enable bidirectional printer properties Ports tab. I assume these are pilots Zenographics. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
Tags: Windows
Similar Questions
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
-
Windows 8.1 will not settle until such time as Sentinel drivers are deleted
Windows 8.1 will not be installed until the Sentinel drivers are removed. However, little or no info on how to remove the drivers available. they are part of a pilot of hasp security sentinel system used by the bernina software. But unlike other windows products, it is not simple to find information about the removal of the drivers or even to withdraw the application for updating is possible and then drivers or software reinstalled with any hotfix required for windows 8.1
at Artongus
Already, I have Windows 8.1 on my Asus laptop and try to install the Bernina software. Can't seem to get past install the dongle and I think it has something to do with the driver. Does anyone have the link for the driver Hasp or patch for 8.1. Thank you
-
TB stops the downloading of emails and will not again until the computer is restarted
This started happening about a month or two it is a. TB will be fine and download my email. Then he no longer do. It will act like it is tempting, but nothing happens. If I close and reopen, it will not download. When this happens, the only way he'll do it again if I restart my computer. Sometimes daily, sometimes what happens every 2-3 days.
It has nothing to do with my mail server, that I am downloading. My HDD is running less on space (a still near 60 GB free), but I don't see how that's the problem because it works great even on reboot. It happened after compaction, but not all the time. I regularly delete files from the Recycle Bin.
Everyone knows this, or have thoughts about what can be the cause of this? He could have something in one of the improvements?
It has no impact emails, just empty the cache part then you feel safer. I guess the chat conversation may be deleted. I do not use cat myself.
-
will not load past the bios reboot loop
Does not load my insperon 5160 passed the BIOS most of the time, and when he does, he could stay on for 5 min. then the tun of willingness to black screen and go into a reboot loop. How can I fix this and what might be the cause of the problem?
Hello
Try to run the following command in the recovery console and check.
CHKDSK drive: / r
Note In this command, drive is the drive where you want to install Windows XP.
Reference:
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265You can also try to disconnect all external devices connected to the computer, except the keyboard and mouse and check if you are able to boot.
-
As I upgraded v38, I can receive and delete mail, read mail after right click on the name of box mailboxes to open in a new window (used for the mailbox just left click), but not compose a message, reply or forward. No error messages, but nothing happens when I click on write, answer or next button. I'm on Win7HomePro. That is what it is? Thank you!
OK, I downloaded a new copy and it seems that if I am OK now - at least, the window again message happens again.
-
I get my exact address, all fields of the form are 100% correct and it does not tell my that my address is not valid. I'm confused, because I have never had any problems to enter my own address, nor usually have problems try to give my money to people. I'll have to waste time on this is pretty insulting. Windows 7 has been well otherwise.
Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Scan the network works on computer windows laptop, but will not scan on the new iMAC!
Hi all, I just moved to iMAC pc and set up my HP Photosmart C7280 all-in-one on the mac. Everything is printing ok, but when I try to scan I get a message error and of course no sweeping. The photosmart is on a home network and still works fine on my computer windows vista laptop. Any Advisor
Great, thanks for the comments!
-
Windows DVD Maker will not play on the TV DVD player
I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?
Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.
Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?
======================================
You didn't say if you have a folder VIDEO_TS on the DVD...OK... you say you can play DVDs on your freestanding
DVD player and on your computer. Startups that appears
DVDs are fine and the problems of members of your family
need to be cleared up on their end.One thing I would try would be to publish the project as a
.wmv movie file in a folder on my hard drive. Then I'd
the following freeware to create a video DVD. There are
a small chance that it would work better for you.(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)DVD Flick
http://www.dvdflick.NET/Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpIf you have problems to download DVD Flick...
Try the following direct link:
http://tinyurl.com/yzx9sck
or...
http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayerSave the file to a folder on your hard drive and
install from there.Tutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmTo create a video DVD base that should play in a free
permanent drive DVD... try the following...First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
Advanced Cyberlink, Nero, Roxio, software
Ulead, etc... but at least it is a start.Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
My iMac will not complete boot the system
After an unexpected break in power, I can't finish the start of my iMac. I tried to start in safe mode several times and loading bar appears but stops at halfway to load, then eventually the computer turns off. I tried to reset PRAM once. Same thing is happening. Not very experienced, so if you have a possible solution, I can try, I would be grateful for detailed instructions. I don't have an additional disc and will lose all files, if I can not do.
Sorry to hear that. If you do not have a backup you should stop trying to fix it now. You may lose all your data. Take it for a free trial at any Apple store.
-
After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password. The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '
(the system is running pre - SP1)
Hello
Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
-
Windows 7 Pro will not restart if printer on.
Hello
When you click Restart, Windows 7 Pro will not reboot with a printer hp (L7680 or C309a) turned on. The screen remains right on "Starting Windows". Windows continues to load after that whatever printer is turned on.
This problem just started. Never happened before. I could always click on restart without problem before.
Any help?
Hey joe_do,
I see that you have a problem with the sequence of starting your Windows 7 Pro computer when one of your 2 HP printers are turned on. How are these 2 printers connected to this PC?
Looks like that devices can be connected to USB and somehow the computer boot sequence put the emphasis for USB on the internal HARD disk.
Jason
-
Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.
Hi rkusa1,
Thank you for using Microsoft Windows forum
QuickBooks worked very well under Vista? It should also work reliably on Windows 7.
However, you may want to follow these steps.
1. right click on your quickbooks start exe file and open properties.
2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)
3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.
4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.
5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).
6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing
7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.
8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.
9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).
You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)
For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5
If the steps above do not post your question in this link: http://community.intuit.com/quickbooks
Kind regards
Aziz Nadeem - Microsoft Support -
For Windows 7, it will not recognize my printer HP Color LaserJet 2600n as a printer, and I see no download on the HP site, all solutions?
Hello DavePerdue,
Thank you for your message. Click HERE for your driver from the HP website. It seems that it just took some time to get the driver online and available for download.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '. I need help!
Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.
After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '. I need help!
Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.
Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625. After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now. Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly. Once again thank YOU ALL!
Maybe you are looking for
-
Yahoo home page, I click on an article to read. If the item has a video I get the following error message: "your browser has requested that this server could not understand. A request header field exceeds server limit. » Does not happen with all vide
-
Check the imei number *.
I need to check my imei number I6s is owned apple Company or not Imei number is *.
-
Abandoned Dm1 now won't start up
My son fell from his laptop. It froze and it turned it off until I could get a look. It starts but hangs on the windows start page. I took the battery and tried to reset several times without success. Is there something else I could try or should I t
-
Office Jet 100: portable printer HP Officejet 100 question
I am trying to print a Tablet Samsung Tab 4 documents using the printer of the object. The printer and the Tablet is that both are compatible Bluetooth. Both are "matched" by the tablet screen. The printer will not print when asked to do so. It seems
-
Will be not updated for Windows 7 - HP Pavilion P6 - 2107C
Hiya - user of HP of long date, first time poster. I got the HP Pavilion P6 - 2107C for a couple of years now - but not * time * I I've never been able to perform a successful Windows Update. I bought the unit new to the Club of Sam and - plug - I ca