Sheet material

Similar Questions

• sheet material 6s iPhone app

  I have an iPhone 6 s. How the iPhone 6s open an app? Hardware wise

  ??  The same way no matter which computer-t device - it loads the app in RAM and executes its code.  Other that that, I don't know what you mean again?

• External drive running on the new Mac Mini

  I try to run an external hard drive that has mountain lion OS with Pro Tools HD of 10. My Mac Mini end of 2015 reads the device, but when I try to boot from it I got a clear x. I tried to start the external on my old macbook (circa 2005?) and I was able to load the operating system and Pro Tools. However, because of the sheet material of the Macbook, it is unnecessary. My main goal here is to start this player on my MacMINI, but I think that my hardware is too NEW? I don't know if Apple hardware is not designed for Mountain Lion. Help, please.

  You cannot start a Mac from an OS older than what it came with. It has always been like that. If your Mini 2015 will not be able to boot from external.

• 24 v digital signal of the event from the host to the fpga power on/off

  Hello forums or

  Sheet material

  cRIO-9074

  module or 9472 digital module 24 V output c series

  To expand on the topic described,

  I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time real clock time on the host computer

  The way I approached this problem is that

  In the loop where the event occurs, if the event trigger is defined then the fgv has a time stamp when the event occurred is sent.

  In the loop that communicates with the control of fpga, I write to the control based on the condition that the difference of the current time checked and fgv time is 30 seconds or less, then it will send the value true, otherwise send fake and wait for the next occurrence of the event.

  The main problem after implementation of this is that 9472 led does not turn off when the false value is sent to it.

  cordially Mzamanstl

  Timer Keeper SD is a FGV so that it is written for her, once the event occurs

  So if the event occurs so timestamp is stored and then the difference of the timestamp result is<30>

  then a true value will be sent to the module of 9472

  So basically I want the light and I want to do the 24 v output for 30 seconds then turn off and wait for the next occurrence

  I think the method that I test it with is not very good, because I realize other factors that may contribute to this problem, so I think I found another way to test

  and I will try it but its will take time.

  cordially Mzamanstl

• HP mini 110 cannot use recovery discs - BIOS insists the hard drive test failed. Drive works on another computer.

  My niece has a HP mini 110 that does not have a day. Do a check of the hard drive in the bios, it failed (7 on playback). I though I should get a new one so I ordered another. While waiting for that to happen, I had access to a usb SATA bridge and the opperating system was beyond repair and the unreadable disk from HP mini, I decided to try to repair the disk. So I reformatted the old disk using my desktop computer. Windows had no problem with the drive and it seems to work very well.

  I also had to order the recovery disks (intro to windows 7).

  In any case try to reinstall using the recovery via the DVD USB drive disks. It kept coming back with error 17 - I found a hard drive error. I also tried to install with a Windows XP installation disc and it was more explicit hard drive it said it had NOT installed it - or "it does not match the sheet material for unity" (or words to that effect)

  To get the new hard drive - the same problem. Even if both of these drives operate as USB connected to my main desktop drives. SO my conclusion is that the BIOS start inspect the hard drive, check the configuration of the formatting. that is the size and the partitions etc. and when they do not correspond to the idea of BIOS of good care he rejects the hard drive and finds it is not installed.  Or maybe to do some files on the hard drive of base. Whatever it is, the bios concludes that there is no hard drive and will always return a "failed" to the hard drive of the bios test.

  Any ideas on that? I need to know exactly which partitions are expected by the bios. Does anyone have these specs, or maybe you have a mini HP and can examine your hard disk and tell me the amounts of partition and the size?

  Unless I can get the bios to recognize the hard drive, I don't see how I can reinstall the operating system on it. Any help is appreciated.

  Thank you

  _______________________
  When it comes to fix computers the longest word in the English language is "JUST"... as in "you do just that and it will work" :-)
  _______________________

  HI David

  Well, I hope this is my last post here. I had already printed a return address for the recovery disks, being returned to the Netherlands. Just for the beggar of cast iron, however, I decided to try just once more would like to think that now that there is a kind of operating system on the hard drive it might work. But unfortunately still; no joy.

  All this time I would be considered may not be something wrong with the external hard drive because it was no problem to start the installation of XP. So I was just wondering maybe it does not receive enough power (it is a slimline portable DVD player that gets its power from a second usb) so I made a DVD player external adhock using an IDE hard drive enclosure (which has its own power supply and an old internal DVD burner I had put aside.

  To my surprise and joy; the HP mini started the recovery process. I am now watching reformat the windows partition and copy the files needed to restore the hard disk.

  So anyone with a similar problem to the HP mini not recognize the recovery disks is my advice; try an another external DVD drive, preferably one with its own supply of.

  Thanks for all your help and patience David.

• Pavilion g5450frm: HP support website does not recognize my product

  Hello

  I want to update my BIOS and for this I have to write my product name but the site didn't recognize, and I got a message saying they were unable to determine my specific product.

  Help someone?

  Hello:

  It is the page that appears when I enter the product number.

  It is not a laptop (which is the section of the forum you posted).

  http://support.HP.com/us-en/product/HP-Pavilion-G5400-desktop-PC-series/5080749/drivers

  If you have a 5450 en, I don't see that either, so choose the 5450sc.

  You should be able to tell from the sheet material if it's the same thing or not. It should be.

  It has the same motherboard that yours is...

  http://support.HP.com/us-en/document/c02898096

• Two monitors are supported by s3707c?

  The HP Slimline s3707c has VGA and DVI outputs. What is this means that it can support two monitors? I could not clarify this point of the sheet material (then again, I'm a lot more than one type of software/programming).

  Hello

  I checked the details and benefits of the concomitant use of DVI and VGA ports you can connect two monitor to the PC

  Check out the link for more information below

  http://support.HP.com/us-en/document/c01635725

• Laptop series dv9410us - Vista repair after replacing motherboard - instead of relocation?

  Laptop series dv9410us. Black screen. No startup. HP agreed to repair free of charge.

  I have a question. I tried to save my personal data, on the eve of the blackout, but received a message that the backup failed. So no backup of some important files seriously.

  My questions are:

  1. when the motherboard is replaced, it is necessary to do a full install of the operating system?

  2. I found a Microsoft article which suggests after installation of the motherboard, the necessary changes to the system to be back compatible with the operating system can be done by following the instructions in the article: that is to do a "repair" as opposed to a complete reinstallation of the operating system. Here is the article:

  http://support.Microsoft.com/kb/824125/en-us

  3. I know, he approaches the situation from the point of view of a repair of XP, but if a similar process can be done with Vista, personal data would not be eradicated for the sake of a complete reinstallation of the operating system. If the amendments could be made when the computer is in safe mode, could the personal data left intact?

  4. it is possible at the time of the repair of motherboard - when the laptop is being repaired?

  My information from all of its activities and thousands of product photographs hang in the balance.

  The MS article refers to a modification of the sheet material... for example if someone updated their motherboard with a Chipset, Audio, etc. Your motherboard will be replaced by another which is the same, maybe a more recent revision.

  You must be aware that sometimes Service HP work recovery and restore the machine back to the form of the plant, and no, they don't back up your files first. It is always recommended to back up important files before sendin a notebook.

  If you have things that you need, I would choose a hard drive USB enclosure or an adapter to fix the hard drive on another pc and copy them.

• HP photosmart Pro 8550 printer CB981A Printhead failure

  Very, very disappointed to have a major failure of printhead on only the second set of cartridges down use printer so out of warranty not very impressed as a user of Hewlett Packard for more durable years of stuff very reliable & long usually off HP support time.

  New print head is happened & mounted seems to have cured the problem the old printhead recicler?

  Looking at the comments, I think that HP must focus its control of the quality, or sheet material component. Reputations take years to build and seconds to destroy. To quote the old adage 'don't spoil the ship for a halfpenny of tar value. "

  I am a dyed in the wool HP man my previous printer is / was a workstation my PC HP xw6400 CXi Aging (still going strong used by my daughter) 970 my plotter a Designjet 750 c more. I tried an Epsom Photoprinter photos fine, using horrible ink. Don't let me down from HP!

• DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER while using Ventrillo

  I try to use Ventrillo, and I have a headset-microphone combo that works well on and off for a few years now.

  It's a logitech, but I don't know the model number - or where to look to find - and I can't find it online, so I think it might not be in circulation more. In any case, it's a simple thing - everything is that it's two catches, one for a microphone to speakers.

  The issue I'm having is that I hear very well, but I can't talk - I'm sure the microphone works, but the error message I get when I connect to a ventrillo server is:

  Cannot enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  Just I updated my Direct X, so I think it should be OK. Is there a specific audio driver I should be looking?

  The computer I use is the one that I built with the help of a few friends, but I'm sure that everything is properly connected - I just have to look around to try to dig up of sheet material if they are needed.

  Any help would be greatly appreciated!

  "Auvic" wrote in message News: ec523159-4321-415 d-85ef-8af44d205cf2...

  I try to use Ventrillo, and I have a headset-microphone combo that works well on and off for a few years now.

  It's a logitech, but I don't know the model number - or where to look to find - and I can't find it online, so I think it might not be in circulation more. In any case, it's a simple thing - everything is that it's two catches, one for a microphone to speakers.

  The issue I'm having is that I hear very well, but I can't talk - I'm sure the microphone works, but the error message I get when I connect to a ventrillo server is:

  Cannot enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  Just I updated my Direct X, so I think it should be OK. Is there a specific audio driver I should be looking?

  The computer I use is the one that I built with the help of a few friends, but I'm sure that everything is properly connected - I just have to look around to try to dig up of sheet material if they are needed.

  Any help would be greatly appreciated!

  Control Panel > sound > recording tab
   
  Click once on the icon of the microphone.
   
  Make sure that the sound card on the computer is the default device
   
  Then click on PROPERTIES > levels tab, adjust the level...
   
  Try it out now...
   
   
   
   
   
  
  --

  Mike Hall - MVP Windows Experience
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Need for daily activities of VMware Admin

  Hai,

  Can someone send me please VMware admin of daily activities.

  I agree with Ed, that this is a general question and most of the responses normally includes one of VMware's favorite responses to questions more... "it depends".  That being said, here are some of the tasks to get started you that I believe are important to the daily health of the environment.  Our environment is greater than 90% virtualized, but I wear many hats, so what I am, "able" to do compared to what I think, 'should' be done is always an endless struggle.

  Prerequisites:

  Overall, you want to have a thorough knowledge of the virtual inventory, that you support.  You want to know the answers to the following questions.  How many physical and virtual servers?  What models?  Sheet material?  Versions of the software?  Have you (or your company) has decided on a specific ROI for virtualization (number of VMs/hosts, etc.)?  Much of this information may be collected through scripts that can be run on a regular basis to give you this view from 10,000 feet of your architecture.  These reports will also probably identify some elements that need to be addressed, which will add as a result of your tasks.  After that, you'll be better prepared dig him minutae.

  • Check the health of all hosts and VM objects in vCenter.  Is there active alarms in vCenter?  Have you set up alarms in the first place?  Alarms automatically trigger the notification or any type of incident, follow-up mechanism?
  • All plug-ins vcenter work properly?
  • Problems of host hardware?  Alarms, bad memory, power supply or capacity problems?
  • Respect all hosts Host Profiles?
  • Are there bottlenecks of resources?  Memory, CPU, disk, network?  You have, or needs no additional tools to get a better grip on it?
  • You run to your optimum resource levels?  In other words, the load is distributed properly?
  • You are short of resources anywhere?  LUN with insufficient disk space, etc.  Do you need to start to look at budgeting additional abilities?
  • Look for the updates of the Firmware on the host hardware
  • Search for ESX patches
  • Checking VM patch
  • Check the version of VMware Tools
  • Run scripts in order to identify the existence of VMS with snapshots and follow-up to see whether they are still necessary.
  • Do you have schmoozed with your Admins in storage lately?  A good idea since you can't very far without them.

  Once more, these are simply a list to help you get started and are in no way a comprehensive job description.  In addition, one of the above tasks can cause a problem allowing you to distract you for days/weeks.

• Install error CS4 Design Premium

  I try to install on Windows 7 Home Premium 64-bit, but I get an error during the analysis of system installation cannot continue the customer contact. Any ideas how to solve this problem?

  Thanks for any help,

  Mike

  Any ideas how to solve this problem?

  Not really... Your info is much too vague. Sheet material? What else is on the system, in particular other Adobe software? Do you properly run with administrator privileges? Also provide setup logs...

  Mylenium

• Months of searching for numbers on the sheet

  Hello all and thanks in advance.

  I have tabs at the top. DATA (sheet 1), JAN (sheet 2), FEB (record 3), etc. until the end of the year.

  Data sheet will be the months on the left now I want care to go to the form to correct month and takes the total of the column relative to the other leaves and place in the correct cell line. (I've been copy paste, but I know there is an easier way to do this, so I turn to the people who know the numbers unlike my lack of knowledge.)

  On the leaves of the month, I would also like to highlight the line that are sat and Sun.

  Thanks again everyone for their help.

  Rich

  In the material master

  

  Hi, NN,.

  You will have a Table for each month. Each Table must have a different name. Your summary table lists more than 12 months, then I would say the table name from each month is named with the name of the month AND the year.

  The monthly tables may appear on separate sheets, or the same sheet. The key, as far as the formulae are concerned, is that each Table can be identified by its name.

  The following example includes only the table for April 2016, named "APR 2016", I assumed that the total line will be row 33 on each table of data collection, but wrote the formula to allow the placement of the line totals in other places. The lines for most of the actual days have been hidden and has not been designated, as these labels have no role in the operation of the formula.

  

  The TOTALS is defined as a footer line. The formula, in the columns showing a value is SUM (a) where 'a' is the letter of the column to be added. (The two values of zero have been entered manually for example).

  The table has a unique formula, entered in cell B3 and filled with right and until the last line for which there is a Table whose name corresponds to the label in column A. For example, the formula has been met only 3 online.

  B3: = INDEX (APRIL 2016: $A$ 1: $ 33, MATCH $N ("TOTALS", APRIL 2016: $A, 0), GAME ($ 1 B, APRIL 2016: $1: $1.0),)

  Syntax:

  INSTRUCTION (range,-l'index of the line, column-index, index of the surface)

  range: all of the cells in the source table

  the index of the line: the number of the start line to get the value. This is provided by the first statement of the GAME.

  the index of the column: the number of the column from which to get the value. This is provided by the second statement to MATCH.

  the index of the surface: omis. By default, 1. There is only 1 area of application of this INDEX, all of the source table.

  MATCH (image search-search for, - where - method)

  EQUIV function returns the position in the list of the search for value.

  First case:

  search for: TOTALS text

  search - where: column A of table source

  method): 0 means finding the exact value.

  Second case:

  search for: the text contained in the cell of line 1 of the specified column. That form is completed on the right, the increments of the column by one for each stage.

  search - where: line 1 of table source

  method): 0 means finding the exact value.

  The formula should be changed for each new line. Three references to "APR 2016" should be changed to match the name of the table to collect this row grand totals. Once edited in column A, the formula can be filled right and automatically adapts to his new position.

  Note: The duration value in column F of the table of the month wouldn't transfer and keep the same formula in column C of the summary table. Any attempt to restore the format to match your example resulted in a triangle of error.

  Kind regards

  Barry

• Kvaser sheet light does not appear in max even after refresh

  I use a light HS material of Kvaser sheet for CAN USB. I installed all the drivers from the Web KVASER website. When you are using with sotware CANKING, it works perfectly. BUT I am not able to detect it in MAX and LABVIEW. Any suggestions?

  
  

• Unknown origin of black sheet pulled from a HP LaserJet Pro 200 M276nw

  We got a paper jam on our printer. One of our employees then pulled this black sheet of our HP LaserJet Pro 200 M276nw. This could really be an original work of this printer? Never seen such a thing before, mayby it's just a few packages that I have inside? The printer does work more (paper jam error). Thanks for helping out.

  

  Hi @VL14 ,

  I see by your post that you had a paper jam and the black sheet was removed from the HP LaserJet Pro 200 M276nw while removing the jammed paper. I would like to help.

  Yes, this part sounds like something to do with the material of printers. The printer would need to be repaired.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.