"Shenanigans" with the car dock - sometimes is not load, sometimes the line audio stops...

Similar Questions

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

  I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

  Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

  Advice would be great because it's driving crazy me.

  See you soon,.
  Kyle

  Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• Plan less first Pathfinder does not work with the lines?

  I'm all new to illustrator and may not have the vocabulary to ask this question well.  Please bear with me.  I want to remove the center of a shape from a bunch of lines

  Imagine that I have established a grid wavy using the Warp tool.  I want to place a circle on the top of the grid and then delete everything that is in the middle of the circle.  The result would be a grid with a hole of type Swiss cheese inside.  I need the parts circled the line actually be deleted (not just hidden) because I'll eventually use the model for laser cutting.

  I understand how to proceed when background objects are forms - such as a hole of Gruyère in another circle - using less before.  However, it doesn't seem to work if the background of the drawing is just a bunch of lines.

  Is there an easy way to do this?

  Thank you!

  Draw the circle:

  

  and a rectangle underneath which covers all - different colors are important

  

  All select and use the pathfinder "Outline."

  

  Give you this

  

  Take the magic wand and set it to stroke brain and tolerance 0%

  

  Click on the circle

  

  Remove. Then delete the rectangle.

• Problems with the Firewire Audio Interfaces

  I use a Presonus Firebox for all of my recording and playback. I just bought a new pc HP with Vista64 and I had problems with my audio since then. Symptoms include random audio dropouts, crackling sounds when you scroll through the menus in my software, no noise at all from windows media, no windows generally sound player. Everything works sometimes, but inevitably fails. Once the audio is de-energized my only solution is to restart the computer, and then it still doesn't work sometimes. I don't understand. My last computer was a couple of years and built the hand. It worked perfectly with this unit until the motherboard is dead after what I bought my new HP desktop with terrible results. The main difference between my pc and this one is that I was using XP and XP64. However, I have the right drivers for the home and the computer recognizes it but I can't operate consistantly and correctly. This new HP has more power than my last, and more then enough power for my needs recording software. I would like to know, I've been recording music on PC for 8 years. Any advice would be welcome.

  I am now convinced that the long nightmare is finally over. I tested my home over and over again with no failures. Record and playback midi seem to work perfectly. Here's what I did:
  
  1 optimized my computer for audio streaming using the guide written by sweetwater.com.
  
  2 uninstall all the drivers from Presonus and all software, including the removal of all PreSonus files on the registry using the instructions provided by the technical support of PreSonus.
  
  3 disabled WLAN and then physically disconnected from the motherboard.
  
  4. my computer has two firewire ports. The front port was connected to the motherboard via a short cable. I physically unplugged the cable from the motherboard.
  
  5. I bought an Express(1x) PCI firewire 400 card with a Texas Instruments chipset. The exact brand is inner Pro PCI Express(1x) 4 port 1394 a. The firewire card is a power port. I plugged the power jack on the same line, connected to the DVD player. I don't know if it's important, but I'll try to document EXACTLY what I did. The firewire card requires no driver work. It came with a disc with a B.S. video editing software I was not installed.
  
  6. I turned on my computer and disabled the built-in firewire in Device Manager, leaving only the new active firewire card.
  
  7. I installed the drivers from the Firebox from the original disc supplied with my unit (v1.20.0). I had good results from these pilots in the past that may be because I use XPsp2.
  
  8. I have connected the combustion chamber when prompted to by the installation software.
  
  9. rebooted the computer with the combustion chamber connected and everything's fine.
  
  By the way:
  
  The inner firewire card cost me $ 30.00
  
  My computer specs are:
  HP a6745f desktop
  Dual core AMD 5050e 2.6 GHz
  XP sp2
  GigsRAM 4 (3.25 because I'm on XP)
  
  If you are confused in the store on the question of whether a firewire card uses a Texas Instruments chipset. Try to get a glance at the map. You should see a chip bearing the logo of TI: the State of Texas, w / Ti. YeeeeeeeHawwwww!

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• Order of generation of the signal with the command START/STOP (State Machine approach)

  Hello

  I met the problem with the realization of control (START/STOP) signal generation using state machine.

  There are 4 States in the computer status (see 4 screenshots below).

  The problem is when I click the button START, only a short series of generated pulses.

  What is the staff of task_in/task_out issue, which is not properly managed?

  Thanks in advance

  Pavel.

  

  

  

  

  Oh... you have defined with the mechanical switch action up to published... Right click and go to mechanical Action > latch when released. Do the same for your Start button.

  You took a second to read down hold value, because your writing acquisition takes on this subject for a long time, apparently.

  The stop button the Application, I did switch when set to released. It is set to the switch so that it can be used as a local variable in the Acquisition State stop as Idle.

  Here's more info on mechanical actions.

• strange problem with the PC just stops

  Hello

  I have a user who has a PC that keeps closing.  Well, I should say two PC.  After fighting with the issue works for several months and not getting anywhere, we decided maybe the 1st PC (Dell Optiplex 755) has just had a bad image or something and decided to give it just a PC brand new (Dell Opiplex 760).  Put a new picture on it and the applications she needs and bam... it is always set to zero.  The only things off the previous PC I parked has its Favorites IE, my Docs and desktop icons.  I thought it was just turn off then I swapped the surge by hope protector and has no good.  I spoke with the user and she says each time it shutsdown she gets a message "Windows is shutting down."  So, for me, it seems that there is something which is indicative of his PC through the shutdown process.

  After some research on his new PC, it seems that when restarting PC that this trend is coming in the case Log - in order of first at the last before the reboot.  I have attached the error and the description given when opening the error message in the event viewer.

  Userenv
  Windows cannot unload your registry file classes - it is still used by other applications or services. The file will be unloaded when it is no longer in use.

  Userenv 2
  Windows saved user PROD\patricyo registry while an application or service was still using the registry during log off. The memory used by the registry of the user has not been released. The registry will be unloaded when it is no longer in use.
  This is often caused by services running under a user account, try configuring the services to run in the NetworkService or LocalService account.

  ATISmart
  The service has started

  LMS
  LMS Service started

  PC Anywhere
  Host started
  Connection object: "C:\Documents and Settings\All Users\Application Data\Symantec\pcAnywhere\Hosts\pcaNSHost.bhf"
  Device type: TCP/IP
  Serial number: 0001-067A-0000-0000-0000-0000

  EACH
  Notification of the user service Intel (r) began.

  Security Center
  The Security Center service has stopped.  He was prevented from running by a software group strategy.

  Micorsoft Fax
  Fax service failed to initialize devices (virtual or TAPI) awarded faxes. Faxes cannot be sent or received until a fax device is installed.

  Microsoft Fax 2
  The outgoing routing rule is not valid because it cannot find a valid device. The outgoing faxes using this rule will not be routed. Check that the devices or target device (if it is routed to a group of devices) is connected properly installed and activated. If routed to a group, make sure that the group is configured correctly. Country code: ' *' area code: ' *'

  When your PC works fine for 3 or 4 days this chain of events is not displayed.  There are only political messages.  Have you ever seen something like that before or have any idea where I might start?  :)

  Thank you

  Rich

  It's funny.  It ends up being the user had a key on the keyboard value 'Shutdown' PC.  Some _ of Belkin keyboard.  Finally, she said "I think it happened shortly after clicking this key."  It was after we gave him a new PC since the follow-up of the matter on the image of the all-new and fresh PC.

  Funny stuff.  I love, hate my work :)

• Computer is slow to start up - could be a confrontation with norton antivirus because it does not load upward

  I have windows vista 64 bit, which worked well until the last windows update and now wait for 7 to 10 minutes before the commissioning is complete.  I have received information from a previous question and followed the instructions to check the programs that can slow down the process.  It doesn't matter what programs I have disable the startup process is still slow.  I noticed that Norton anitvirus does not run on start up and shuts off when I check on the Security Center.  Is this the cause of the problem - there was a conflict with the last update?

  Any help would be appreciated.

  Concerning

  Phil

  Hello

  Of course it looks like software malware may be involved. The following message will be troubleshooting
  methods to use if the problem persists.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Dell Latitude E5500-problems with the IDT audio driver

  Hi all!

  I use Windows Vista 32bits on E5500 and everything works fine with the big exception of the audio driver. I used the latest version for this laptop which is A15, no other versions are available on the downloads page. The pilot is very unstable and crashes all the time. Pressing the sound keys does not change the audio levels instantly as expected. There is a noticeable delay in the volume control after I pressed the button. A few 4-5 or more seconds after I press Volume upwards or downwards until the press is registered. A very weird situation and nothing helped so I deleted the audio driver of Dell. I use the default Windows driver now and so far everything is ok.

  Everyone has experienced a weird behavior like this on the same computer laptop? Do you know where I can find an old audio driver for E5500 so I can test again?

  As the system software Dell-is important on the audio system or not so. I installed it after a recommendation in the audio FAQ here on the forum. Thanks for all the tips!

  Pandorum

  old audio driver for E5500

  Very good selection here

  http://downloads.Dell.com/published/pages/latitude-E5500.html

  All most recent drivers dated IDT must be removed from the hard disk or at least the drivers folder before installing an old date one.

  Pandorum

  As the system software Dell-is important on the audio system or not so.

  With the Intel chipset driver, was important for XP, not important for 7, but not sure about Vista.

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.