Shortcut to disable TouchPad no longer works

Similar Questions

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Synaptics Touchpad no longer works correctly

  Hello Internet!

  Hear my fate and tremble: I recently updated my drivers from the official manufacturer website Synaptics touchpad.  Before the update I could press twice on the upper left of the touchpad to enable and disable the touchpad.  It is a convenient feature that I have grown very fond of.  However, after the update this feature no longer works!  I'm so devastated...  I really enjoyed watching the pretty light outline of my touchpad to turn to a hurt red when it has been disabled.  I suppose I could return the drivers back to their old form, but I wanted to check if anyone knew a separate fix so that I could have as well the new drivers and the old features that I loved so much.

  My model number is: A6Y49UA #ABA

  My operating system: Windows 7

  Thanks for your help, I remember you when I am the dictator of the world.

  Hi @El-Nacho .

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I see that you updated your driver from the manufacturer's website.  HP recommends that the drivers listed on the HP driver page.  These drivers have all been tested and known to work properly. When you install the drivers of the manufacturing site, they may or may not work properly with your laptop.  Can of OEM and sometimes change a driver so that it works properly with your exact laptop.

  Download or update of software and drivers for HP computers

  If you don't have a problem with the old driver, I suggest you do a roll back driver.

  15.3.11.0 is the version recommended for your laptop and Windows 7.

  Here is a link to the driver download page if you need it. HP Pavilion dv6-6c10us Entertainment Notebook PC Drivers

  Good luck!

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• Touchpad no longer works after upgrade to VISTA on my M105-S3084

  I recently updated my system to VISTA and since that time, my touchpad does not work. I tried to install all types of drivers, that nothing seems to work. VISTA indicated that the device works properly. All other devices work - just the touchpad.

  Any idea?

  1 million thanks!
  Axel

  Have you checked if the touchpad is not disabled?
  You can enable and disable the touchpad by using the FN + F9 key, but I don't know if it will work if you have not installed the correct drivers m.

  However, in my opinion, the touchpad does not work due to incorrect or missing drivers!

  The laptop seems to be designed for the American market, and therefore, you should use the Toshiba site to download the correct Vista drivers!
  http://www.toshibadirect.com/TD/B2C/home.to

  By the way; It s always a good idea to perform a clean install an update!

• My Satellite Pro A200 (PSAE7E) touchpad no longer works

  Dear Sir.

  My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

  I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

  I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

  Can you help me please

  Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

  Thank you very much

  Zaid

  Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
  So the latest driver, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

  Check it!

• Satellite Pro L450D - 12 X - pad touchpad no longer works

  My daughter used the laptop earlier, when suddenly the mouse pads and buttons right and left click stopped working.

  I tried to restart and even restore to an earlier time, but nothing he will work again.

  Any ideas what this could be and how it can be sorted?

  Thank you.

  Hello

  Have you checked if the touchpad has not been disabled by mistake using the FN + F9 keys?
  Please check this box.

  In most cases, this tiny option would be to neglect and in most cases, this is the reason why the touchpad does not work.

• Mouse Touchpad no longer works correctly

  My touchpad mouse no longer works correctly.  I'm unable to double-click, even after changing the speed setting in the control panel.  In addition, items are selected when appropriate without a click. This could be a virus or a definition that has been accidentally changed?  I tried to restore to a previous point, when things were working properly and that did not help.

  Check with your PC manufacturer for support.  You may need to update your driver.

• HP Envy 15 x 360 PC convertible: HP Envy 15 x 360 convertible PC touchpad no longer works?

  So my boyfriend for my last birthday brought me this amazing new laptop, I got it for only less than a month now, and I don't use it all day as its especially for college work and to watch TV shows from time to time. So when I pulled my touchpad is today completely insensitive and he made me a slight panic because it was a gift and I know that it was not particularly cheap. I don't know if it's something that I've physically done for her (which I doubt because it's probably onlt served approximately 8 times since I got it) or if it is a problem that occurs on a regular basis to this model?

  Help, please!

  Hi there @Chloekirkham98,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your TouchPad does not work on your laptop HP ENVY 15 PC.

  Have you done all your Windows updates?

  Have you tried to connect an external mouse?

  It works very well?

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  There is a section called allowing a TouchPad and ClickPad. On some laptops, the TouchPad can be disabled by pressing a power button located near the TouchPad. Please check and make sure that it was not postponed.

  If the laptop doesn't have a power button, then you can use the properties of the mouse to check and see if you need to activate the TouchPad.

  If you click on the additional mouse settings , it should display the mouse properties page. If you go to the last tab and it says allow devices, please click on enable devices. This will set the default parameters (see examples below).

  

  If it does not say to activate the devices than the TouchPad that is. Please use thislink for the HP Support Assistant, if you do not already have HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Thank you!

• Synaptics touchpad no longer works on Qosmio G50-133

  My Qosmio G50-133 suddenly lost it of keypad touch, it no longer works, the panel of mouse control shows the synaptics without any inside information tab.
  I uninstalled, rebooted my windows 7 with no luck and I just can not find a driver for it on the toshiba site or anywhere...

  Sosmeone there a clue?

  Hey cool.
  Thanks for the comments.