Shut Down button indicates the yellow exclamation point

Similar Questions

• Code 31, Microsoft IASATAP adapter doesn't work does not correctly, the yellow exclamation point, no internet

  I have Emachines E620, Microsoft Vista and service pack 1. My PC cannot connect to the internet and stop a yellow exclamation point error message. My internet providers technical support, I lost my IP address and cannot be recovered. My PC shows that my card Microsoft ISATAP does not work, but when we try to update, it says I have the updated version of the adapter.

  I tried everything the system fixed but did not work. Can't try bugs online because I can not connect to internet. My research on the Internet, maybe I need service pack 2. Can someone tell me if this could work? If so, what is the way least costly to achieve? What does it mean that my PC is undesirable?

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e5f8973b-0079-4E2B-8da4-7bbd345b9426

  Read the info above from Microsoft Support.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.eMachines.com/support/drivers.html

  Go to the Web site of emachine'ss to the above link > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now that you have no Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• How to find the question after hp support assistant opening when the icon indicates the red exclamation point?

  Hi guys,.

  A new pavilion g6 and sometimes get the red exclamation on the HP SA but when I open the screen of the wizard how to find the issue which marked the icon?

  The Assistant has just opened, and I see the screen normal but not extra "Pavilion" to tell me what needs attention?

  Is this normal?

  See you soon!

  Ian

  screenshot of open SA HP...

  

  Hello again, TheHandyCrowd, and ionamartin123.

  Made this suggestion solves your problems?  I was curious about the result.

  I hope that you are having a great day!

• Network of the island so no internet access remove a yellow exclamation point in the network icon in the taskbar.

  Hi, I have 10 windows 7 Enterprise workstations connected to a Windows 2008 domain and there is no internet connectivity (this is normal) but each workstation network icon displays an exclamation point yellow because she had not any internet connection. Isn't there anyway other than hide the icon which I don't want to get the yellow exclamation point to appear.

  Thanks Simon.

  I finally found the answer. If you are running Windows server 2008 R2 edition, then you can find this policy in the strategy of Group Editor and it will be effective for your Windows 7 machines. If this is not the case, as I am on Windows server 2008 standard and then, is not an option within the Server Group Policy Editor must therefore be as a change in local policy on the workstations.

  It is found on the local computer by running gpedit.msc and looking: -.

  Local computer policy,

  Administrative templates,

  Network,

  Network connections,

  Does not display the network icon "local access only".

  Select this option enabled.

  Closing of session and immediately and this will make the yellow exclamation point icon disapear.

• In devices and printers, I have an icon for a laptop with a yellow exclamation point. I have a desktop computer and remove this icon of the laptop.

  A laptop once was connected to my desktop via USB cable PC; It belonged to me.  The owner wants to access its database of the company, but in vain.

  Now, in devices and printers, I have a laptop icon that is not one of my devices, but the Device Manager lists in "Other devices" with a (USB) universal serial bus controller, which is also included in the icon of the computer laptop properties under the material.  The yellow exclamation point is for troubleshooting.  The problem is: I do not own a laptop device.

  I want to remove the icon of the laptop and its inscriptions, including the (USB) universal serial bus controller.  Both are marked by a yellow exclamation point, but, of course, they do not work because they do not exist.  But this icon of the laptop has name my PC on it.

  My desktop PC should not be listed in devices and printers, does it?

  Hello.

  Open devices and printers right click on the device - remove the instrument.

• Tecra M2: XP Device Manager shows 4 yellow exclamation points

  Hello

  I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.

  Ethernet controller
  Network controller
  Unkown
  Multimedia audio controller.

  I have havetried to install drivers WITHOUT success.
  I have tried loads yet joy o,

  I'm missing something.
  Can someone help

  Hello

  I'll try to identify the devices without plug & play id, but I can't guarantee anything.
  If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).

  Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
  http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zip

  Network controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
  http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zip

  Unknown device of infrared
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zip

  Multimedia audio controller is the SoundMax
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zip

  Please allow me two questions:
  Why don't you use the recovery media. It is much easier?
  Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite C660 - no access Internet - yellow exclamation point appears

  Hello

  I have a toshiba Satellite c660 and there serious internet problems.
  When I turn it on, it says that I don't have access to the internet but when I try to use it, a yellow exclamation point will appear then down down on the wifi icon.

  If I click on the internet icon and it says im connected to the internet, but I have no internet access.
  I'm really confused as to what to do. Internet days might work for a while and then all of a sudden the exclamation point appears there and I can't get working again.

  If anyone has any ideas on what is wrong or how to fix Tournay would be GREAT. as for now I can't use the internet wireless on my laptop.

  Thank you.

  Hello

  I think there could be a problem with your WLan router.
  I recommend to reset the router and try again

  If this is not enough, clear all settings of encryption like encryption, password encryption, mac address filtering, etc. and try to connect again to open WLan.
  But this just for testing purposes

  If the connection would be functions, you must configure the router once more.

• Point of "Unknown device" in Device Manager with yellow exclamation point

  I have a VGN-FW170J laptop.  My poster an "unknown device" Device Manager with a yellow exclamation point next to it. indicates that the driver is not installed for this device.  How to solve the problem?  Sony Firmware Extension Parser device driver "" SODFEP-00270203-0083. "." EXE"what to fix this problem, BUT NOT compatible with my computer.  Need a solution

  Hey there GEP170!

  Please provide additional information about your question. This camera is connected to your computer? To check if this feature is one that is being indicated by the Device Manager, you can try to uninstall this device. If this device still appears in Device Manager, it only means it could be another device.

  Please post here, what happens if you uninstall this device.

  Thank you

  ~ Tim

• Satellite Pro A300-22F - WLAN is listed with a yellow exclamation point

  I just bought an A300-22nd.
  WIFI does not work - in Device Manager the conroller of network (under 'other devices') has an excalamation mark on it - the problem is not installed driver.

  Laptop came with a sheet of additive of toshiba on problems with wireless connectivity - which goes through how to install the driver. Two problems - the leaflet is reserved to L300 L300D and copying is of such poor quality that I can't read the instructions!

  I know that this phone has WLAN (a, d, g and draft n), and it has a switch for him - what is on and lights up.

  At the moment I am connected to the router broadband - not much use as my PC is at the front desk even - I need a wireless connectivity!

  Help!

  Hello!

  On the Toshiba site, you can download all the drivers for your laptop and so he should t be a problem to solve this yellow exclamation point:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Download the driver the most recent and that s it! :)

  In addition, WLAN connectivity can be enabled using the hardware on the laptop switch * and * if you press FN + F8.

  Good bye

• Basic with yellow exclamation point features

  Hello

  My L412 supplied with Windows 7 Home Premium. I reinstalled Windows using a purchased Windows 7 ultimate DVD and I installed most of the software, but I still 3 devices basic system with yellow exclamation points on them.

  Here is a screenshot

  http://Tinypic.com/r/28j9loy/7

  Any ideas on how to fix?

  Try the driver of lenovo card reader

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-75277

• in Device Manager yellow exclamation point cannot read a cd

  Open an e-mail with an attachment. It was the power point. I haven't it. I went so far and SEEN download many things that I did not so I went out. Since

  Then, I can not read a cd and receive Assistant saying a device pci not matched with the right software. Device Manager, it shows a lite on dvd with a yellow

  exclamation point and a pci with a device also. I found the files and they show yellow exclamation point and said microsoft answers site. This led me here

  Hi, Fyodor,

   
  What is the operating system installed on the computer?
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Refresh the Device Manager and check if it helps.

  (a) click Start.

  (b) right click on computer.

  (c), click on manage.

  (d) click on Device Manager.

  (e) right click on computer and click Scan for hardware changes.

   
   
  Method 2: Uninstall and reinstall the drivers for DVD player and check if it helps.
  Uninstall or reinstall a device
  Note: This link is only applicable for Windows 7 and Windows Server 2008.
   
  Method 3: Follow the link and check if that helps.
  Your CD or DVD drive cannot read or write media

• How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

  Nice day

  How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

  with regard to my question above. I need to hold the button of power for 5 seconds to completely shut down my laptop. even restart or sleep does not work well. I upgraded a real victory 8.1 to 10 free victory by that windows app reservation offered. IM using acer aspire v5 - 573 g i7, version gt750m, Finnish keyboard

  solutions, I tried to random searches that did not work for me.
  1 unchecking quick stop to power options
  2 disabling hibernation in cmd (types a code forgot what I have)
  3. update all drivers and bios with sites acer official drivers, driver pack solution 15.8 and utility driver update intels
  4 decommissioning intel management engine components driver 11 to 9.5
  5. go to the bios and reset to the default settings
  6 make a shortcut of "shutdown" with codes e.g. shutdown /s /t 0
  7. click Update stop

  IM thinking of reinstalling windows 10 via recovery which removes applications, files, drivers, etc. and hope this solves. I can't roll back to win 8.1 because ive done this reset before you completely clean out my system of win random 8 and trashes the restore option was gone.

  Thanks in advance

  Hello/Hallo wuschel93,

  exactly what I had. Stop number appears only after a certain time the laptop running.

  The problem is INTEL MANAGEMENT ENGINE RELATED V.11!

  I fixed it with uninstall Intel Management Engine Version 11. Windows will then install version 9.5 automatically. After that I turned off the automatic update of the driver for this device. You can also install 9.5 without uninstalling the old one, it wil crushed.

  Other manufactures also have this problem, but while Acer is still asleep, they provide a solution (including download links):

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/sleep-and-shutdown-issues-after...

  Maybe there are any other issues that result in the same problem. But in most cases, it's the answer. The thread Starter maybe forgotten to disable the automatic driver update or made installation of v9.5 evil?

  TEPCO

• My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  My CD drive on my Dell 2400 appears disabled (on Admin Managemnt yellow exclamation point) as this is my plugin dvd recordr/cd player recorder. How can I fix? Thank you

  Locate your CD drive integrated in the device list manager.

  Do a right click on it, it should appear a window with "Disable"... 'Enable '.

  Click Activate.

  It is a possibility, the other is...

  The fact that you are also using EXTERNAL units could be the 'reason' why one integrated disabled to start with.

  The USB in the BIOS setting must be wrong... to do this.

  In addition, the "HALT ON...» ' Command, in the BIOS, will not. (It is possible that the "Halt" command is... ON "ALL ERRORS").

  Assign to this... "WITHOUT ERRORS".

  This should cure the problem of USB connection (for external use) disable your "built-in" CD player

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• DC7700 P/N ET088AV, S/N 2UA7181CCC, I need USB drivers. (Got the yellow exclamations bit)

  DC7700 P/N ET088AV, S/N {removed privacy}, I need USB drivers. (Got the yellow exclamations bit) Windows XP pro SP3. Just cleaned and wiped the hard drive and I'm trying to re - install everything.

  I was not impossible to locate the correct driver. Those that I found is not recognized when I update the driver.

  Can you tell me the correct drivers? Thank you

  The latest patch fixes the issue.

  I also bought the disc in case I have to work on it down the road.

  Thanks for your help