Sign # Blackberry "BOLD" of blackBerry Smartphones

When you are on the phone and you need to type in the pound key, which is the right key to hit? Hit the alt and Q (designating the #) does not work. Suggestions?

Thank you!

Enter the key # itself, not ALT + Q.

Tags: BlackBerry Smartphones

Similar Questions

  • My bb bold blackBerry smartphones get more heated and stops loading

    I have a bb bold 9780 which is about 9 months old... recently I started having this problem with my battery to reach extreme temperatures of 45 c and then sign shows a card that supposed to happen when my battery is fully charged, but gets to 40% and does not load then... I have to put my personal number near the ac to cool up to 29 c to recharge it. even the battery life is very poor... She is barely 4 hours on a full charge... I have 2 batteries... I have a 9000 "BOLD" and I of the 9780 and the two we live the same problems...

    Thanxx in advance

    Hello and welcome to the community!

    It is possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

    1. Get a known good and already fully charged battery... use it in your BB and see what happens
    2. Get access to a BB good and the same known... use your battery in there and see what happens

    The results of this will show if your BB or your battery that has the problem.

    What you describe, it is likely that your BB, which is the root of the problem... to test, I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    It is also possible that your BB has a problem at the level of the material which is the cause... and, of course, the internet remote diagnosis and operating system/software recommendations will be nothing if this is the case.

    Good luck and let us know!

  • BlackBerry Smartphones update Blackberry Bold 9780 without USB cable

    Hi guys I had a bold 9780 I want to update the most recent operating system, but my USB port is not working can I update by another route.

    Hi Nivesh3838

    If you want, then you can consult:

    KB15644 : how to request an update to BlackBerry Device Software wirelessly on the BlackBerry smartphone

    But please note, never carry out this OTA update without a backup of the appropriate device.

    Good luck.

  • BlackBerry smartphones, that I need help to transfer data from a 9870 "BOLD" for a Blackberry Curve 9300 Blackberry

    Hi, I have used a Bold 9870 for a few months now. I've been saving my camera on my computer periodically. Unfortunately, it has been exposed to water the weekend and unresponsive. I transferred my acct (by Sasktel) to the Blackberry curve of my son he no longer uses. (I'm drying my "BOLD" in a bag of rice and I hope that it will work again in the coming days?!).

    My question is did anyone know how I can get all my information backups "BOLD" (contacts, emails, texts, bbm surveys) and get only their transferred on the curve that I currently use. I feel completely lost without it!

    Thank you for your time.

    Hi shelran,

    Welcome to the BlackBerry support community forums.

    It's very sad to hear of your soaked BB device. I hope it still works!

    Check the article below to learn how to restore the data on the device-

    • KB03953  How to back up and restore data to a new BlackBerry smartphone
    • KB13428  Transfer files from one BlackBerry smartphone to another backup by using the backup and restore tool
    • KB10339  How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file
  • BlackBerry Smartphones Black Berry Bold 9900 only able to ring if number in phone contact list

    Black Berry Bold 9900 only able to ring if number in phone contact list

    can someone help me solve the problem above his on optus and has just the stock of claims on this subject.

    Would appreciate any assistance.

    Perfect phone in all other respects.

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry smartphones blackberry bold 9900 stuck on 80% of its restart

    The cat was on my bold 9900 when suddenly it restarts automatically. He stuck around 80% of reset on the screen and did not move. Battery and SIM, at the beginning it was rebooted fine but stops again at the same place (about 80%) and did not move. What should I do?

    When you get a chance, do a battery pull.  When the red light goes on the front of the phone, hold down the back button all the time while the phone is in boot.  When initialization is complete, the phone goes into safe mode.
    http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB17877

    Have you recently installed something, or using a custom theme?  If so, uninstall it.  If it gets stuck again on restart, I would recommend a reload of software.

    Two methods of reloading of the software:

    http://supportforums.BlackBerry.com/T5/device-software-for-BlackBerry/how-to-reload-your-operating-S...

    force detect the BlackBerry smartphone by using the Application Loader
    http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10144

  • Transfer of blackBerry Smartphones to password Keeper, Memo Pad, and Photos of Bold 9700 new curve 9320

    Hello

    I don't have 'Outlook' put in place on my PC, or I really like.

    Is it possible to synchronize the password Keeper, Memo pad and the Photo of my current Bold 9700 to my Blackberry Desktop Manager?

    Then I can transfer these items to my curve 9320.

    Thank you.

    Tamara133 wrote:

    Is it possible to synchronize the password Keeper, Memo pad and the Photo of my current Bold 9700 to my Blackberry Desktop Manager?

    Then I can transfer these items to my curve 9320.

    Hi Tamara133

    Welcome to the Forums of the BlackBerry Support

    If you stay at 9320 curve then more easiset way to do this is an Assistant to switch device using Desktop software.

    KB23677  :  How to switch using BlackBerry Desktop Software devices.

     

    Or if you want to perform a selective restore to your new 9320 then first do a full backup of your old 9700 using desktop software. Once you have your backup connect your 9320 and run the software, select the device from software > restore > data choose selected since your last backup you did > scroll down the list and select only the password keeper and memo key data in this list, then click on apply.

    Or rfer to this Article:

    KB03953 : How to back up and restore data to a new BlackBerry smartphone

  • Hiden images retrieve blackBerry Smartphones are BOLD 9780 - please help!

    Hello!

    I hide a few photos on my BB Bold 9780, and now I can't find them.

    I found the help for this but it works for the CURVE.

    Please can someone help me get these pictures?

    Thank you!

    Hello and welcome to the community!

    This KB describes how:

    • KB18466 Hide or show pictures on the BlackBerry smartphone

    Yes, it seems tedious, but here again, the cover-up is something to an end, then if the should not be as simple.

    Good luck!

  • BlackBerry Smartphones unable to update BlackBerry App World on Bold 9700

    I use a BlackBerry Bold 9700 BlackBerry OS version 5.1.0.121 with BlackBerry Device Software version 5.0.0.442.

    When I click on the BlackBerry App World on my camera icon, I get the following message:

    "To continue to use BlackBerry App World, you must upgrade your current version. For more information, please visit www.blackberry.com/appworld/support. »

    So, I click on the upgrade button. My BlackBerry browser then launches automatically and tries to open the "'http://appworld.blackberry.com ' page." However, whenever I tried this, the page may not load in Black Berry browser and remains off. I tried to leave my phone for increments of 10-15 minutes to load the page, but after several attempts, I was never able to open the page successfully. I still get a blank page.

    So, I visited the next page on my desktop: http://ca.blackberry.com/apps/app-world/download.html.

    I tried the first method of sending the URL on my device, but it ended up with the same result described above when I tried to access the URL that was sent to me. The BlackBerry browser displays a blank page.

    I then tried the second method described on http://ca.blackberry.com/apps/app-world/download.html. I connected my device to my computer via a USB cable and clicked on the download, it affects today by following the instructions on the page. But, when I clicked on the button, I was led to a "Mode not available" page that says the following:

    "Downloads via a USB connection are not enabled for this product. Please visit our mobile download site using the browser of your BlackBerry® smartphone. »

    So my problem is cyclical. The page that I need to access the site to download the App World can not load in my BlackBerry browser and I can't download the product via USB either. This seems to be a bug, and I want to report it to Research In Motion.

    If anyone has any advice on how to solve this problem, it would be much appreciated.

    The solution described on http://supportforums.blackberry.com/t5/BlackBerry-World/Can-t-upgrade-BB-World-I-think/m-p/2485451 solved this problem. Thank you, sdgardne!

  • Scroll of blackBerry Smartphones are becoming very difficult to "BOLD" (with a pad, not a scroll wheel)

    Hello

    Scrolling became very difficult in my "BOLD", but it has a pad, not a scroll wheel, so I can't follow the spoken wheel and push solution previously in these forums.

    The symptoms are that it is difficult to get the cursor to move to the left or to the right or upwards or downwards, sometimes that it moves more easily than other times, but never as easy as it was until last week. What often happens is that I end up pressingteh pad too hard trying getting the top of the page to save the movement and thus itreads as a click instead.

    I tried to clean the buffer, cleaning of my thumb or finger, battery-out-restarted "BOLD" of countless times, tried with my fingers wet and dry...

    It seems that she has changed after an update has been downloaded, but maybe it's just my perception.

    In any case, what could be the problem and what is the solution please?

    Hello qw8,

    Welcome to the forums.

    Take a look at the knowledge base article below which may help you with your trackpad problem.

    KB29640

    Trackball, keyboard or trackpad not working only not on a BlackBerry Smartphone.

    I hope this helps. Nice day.

  • BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

    I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

    Thank you

    Rich

    Hello merlin02131

    Welcome to the Forums of the BlackBerry Support

    Sorry to hear about the problem you are experiencing during the update!

    But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

    You have a backup of your device, or using BlackBerry protect for the backup?

    If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

    KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

     

    Additional information:

    KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

  • E-mail blackBerry Smartphones aol do not reach my "BOLD" blackberry 9900. has worked well before.

    For some reason some of my aol email is not pushed to my blackberry bold 9900.  Some are, and they take quite a long time.  any ideas?

    Hello Frank

    If you encounter a problem with the reception of e-mail, then try these steps in order:

    1 - Save your pocket computer.

    • KB00510 : How to register a BlackBerry smartphone with wireless network
    • You expect a registration messages in your Inbox messages.

    2 send your Service book

    • KB02830 : Send service for the BlackBerry Internet Service directories
    • (Wait an Enrollment Message arrives in your Inbox for each email that you have configured on your device)

    3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

    After restarting, please check if it works.

  • MY CURVE 9370 SHARING SAME EMAIL ID WITH MY BOLD 9780 blackBerry smartphones

    Dear friends,

    I need help. I discovered that my curve 9370 share the same e-mail id with my bold 9780 not allowing do not make me use of the 9370 as a different device of the bold 9780 curve.

    When I try to put in place the blackberry on curve Messenger it keeps displaying error report that the blackberry id is already associated with BBm on another device

    Imbernon

    Hello IFYCHUKWUNEKE

    Welcome to the Forums of the BlackBerry Support

    You must perform an erasure of security on one of the device and use a new ID of full BlackBerry on this particular device. It will allow you to use these two as different. So, first make a backup of your device in which you will complete these step and then follow this KB and use a new BlackBerryID:

    KB26694  :  How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet

     

    I hope this will help.

  • BlackBerry Smartphones Blackberry Bold 9700 will not ring

    Hello guys. I have a problem with my BB Phone. It does not ring. When people try to contact me, it just doesn't sound. I have v.5.0.0.586. I tried rebooting by removing the battery, but still the same problem. Could someone help me please?

    Hi BiancaBogdan

    It's fine if your device passes self-test.

    Have you tried to change your ringtone to any default ringtone?

    If the problem persists, then it could be a software problem, but this is my personal advice to stay on OS 5, because the Bold 9700 doen't have enough memory to run OS6, you can install it on your Bold 9700 OS6 but you will have to confront the issue with little memory, will not be able to install the application a lot , multiple tabs, you may experience problems such as freezing and trolling device. I suggest that you should stay on OS5 and try to perform a clean OS Reload that will correct any software problem.

    first make a backup of your device using desktop software:

    KB12487 : How to backup BlackBerry smartphone data using BlackBerry desktop software for Windows

     

    Then follow this KB to recharge your device software:

    KB11320  : How to perform a reload own BlackBerry Device using BlackBerry desktop software for windows software

     

    After charging, do not restore any 3rd party application from your backup, choose a selective restore, restore only your Contacts, calendar, memo etc. Check your device and see if the problem resolves. If the problem continues then you can start with the native BlackBerry application and continue with the others.

    Try it and tell us your progress.

     

     

  • BlackBerry Smartphones BB Bold 9900 just does not load

    I bought my BB Bold 9900 10 months and I never had problems charging my battery. But the other day, when I got home and charged, when I woke up, Led - the RED light flashes and custom light up. I used another charger (nine) but still the same. I tried to plug it into my laptop for charging, but still not good. BB office says this device was not connected (since obviously he doesn't have the power). I searched online and I tried the "kickstart" they say where I have to charge my phone for 2 hrs and remove the battery for 10 minutes and put the battery back and wait another 2 hours - still not good . Although when I tried, I saw the icon charge for a few seconds during the first 2 hours, but do not see it again.

    Anyone have a suggestion? Do you want to know if I need to replace my battery or have this problem? We have no Center service BB here in the Philippines. The trader would normally send unit to Singapore to have checked/fixed. I can't afford not to have my phone because of my work and I have files that are stored in...

    I will appreciate any help you guys can give. Thank you.

    In waiting for someone to answer, I did some research and tried them out, but so far, I'm still not able to turn onn/load my camera.

    Here's what I've tried so far:

    1 pull the battery loading and put back on the

    2. the "kickstart" than what a qualified member where in while now the end call key, remove the battery and the light RED LED while that appear and immediately press call button for 3 seconds and press the end button again. He advised to do 7-12 times and told me that does not work the first time... but try again. (I tried to do this several times)

    3. a publication that he had his dependents for like 2 days and removed the battery every 2-3 hours. (did not have my phone which support long however )

    4 force detect the BlackBerry smartphone by using the Application Loader. It was also published in KB10144of Blackberry Knowledge Base.

    FYI: guests of the message I have seems different from what has been published well since I don't have the chance to reinsert the battery. I was prompted to unplug the unit and close the application before installation. After you restart, DM didn't register my device. Did not have the option 'new attempt/Update ".

    (I know it's funny you reply to my own post, but I'm really desperate now.) And hoping that someone must answer, at least you know what I've done so far)

  • Sync blackBerry Smartphone Music Sync and media on "BOLD"

    Hi all

    When I go to Blackberry.com on my "BOLD" there is a link that says "sync your music iTunes office with your blackberry smartphone: find out how.

    When I get the link to download on my PC for the media sync... It does not seem to do anything.

    Anyone who has tried this and got positive results?

    Get it solved!  Just need to reboot my computer for the program to take effect.  Thanks for your help gents

Maybe you are looking for

  • date of reading of hurt to excel using the report generator tool kit

    HelloIm trying to read a date from an excel worksheet by using the report generator tool. I talked about this http://digital.ni.com/public.nsf/allkb/01B026BEB54E3414862571B600618827 KB and it works... kind of. My dates are all read next 4 years and 1

  • My XPS-13 9350 can't Sleep

    After update my windows XPS-13 over recent 10, whenever I have close its screen power button or tap or click "Sleep" in the start menu-> menu of power, it will go black for a little while and then wake up immediately. In windows Event Viewer, I saw t

  • Develop a Compatible application

    Hello I tried have nothing found but which contributed to... I would like to develop an application that works with older versions of Blackberry. But I don't see a setting in eclipse or project settings that allow me to choose.  I missed something? W

  • Could not find the device with uuid - ESXi 4 and 5 - Dell 2950

    HelloI am installing ESXi4 or 5 on a Dell 2950.  I'm not an expert material guy, but I think the controller is a Perc 5 controller hardware / i.  It is a processor of Intel Xeon dual core CPU 2.The link of compatibility:http://www.VMware.com/resource

  • Please help solve the problem error: PLS-00306: wrong number or types of a

    Hello Please see my statement of types and the procedure. Object and the nested table that is declared at the schema level I'm using the oracle version 11.2 CREATE OR REPLACE TYPE T_COPY_EVNT_DTL IS OBJECT ( eventId varchar2(100), eventDescription va