signal analysis is not possible - no problem insert

Hello

parts of my program menu are disappeared.

If I want to add a new step (example: the frequency - power spectrum analysis), I don't see that 'have signals' and 'generate signals' in my menu?

Where is my menu "signal analysis"? If I load an old project or an example that uses the spectrum - it's here. If I want to add a new - the menu is reduced to the above described points...

I have SE 2009 - someone knows how to fix this?


Tags: NI Products

Similar Questions

  • When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses.

    When I connect to the internet, servads pop up.  I ran malwarebytes anti malwalre and microsoft security analysis.  Not found the problem of servads in their analyses.  How can I get rid of the servads.

    Hello

    1. what web browser do you use?

    2 have had any changes made to the computer before the show?

    If you use Internet Explorer, please follow the methods.

    Method 1:

    If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.

    To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

    http://www.Microsoft.com/security/spyware/browserhijacking.aspx

    Method 2:

    Step 1:

    Start the computer in safe mode with network and perform antivirus analysis.

    See the link.

    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:

    Perform an online virus scan.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 3:

    Follow the steps in the link.

    http://Windows.Microsoft.com/en-NZ/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

    Method 4:

    optimize Internet Explorer and check.

    NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    http://support.Microsoft.com/kb/936213/ro

  • DeskJet 2540: I am able to print, but the analysis is not possible.

    I installed the printer Deskjet 2540 with a Wi - Fi connection on my new iMac (yosemite).

    The printing part is OK.

    Scan using the HP scanning application is not possible.

    What's not?

    It seems that there is something wrong with the HP scanning application.

    Hi @M_DW,

    Welcome to the Forums of HP Support!

    I understand that you are unable to scan with printer all-in-one HP Deskjet 2540. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I see that you can not use the HP scanning app, please explain in more detail what is wrong.

    What is the error message that you receive?

    Have you tried to scan from another application, such as Apple Image Capture?

    I wonder if you use Airprint driver rather than the driver from HP.

    Please try the following steps to see if we can get the scan function to work properly.

    Reset the printing system:

    To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Laserjet back in right now.

    Once the reset is complete, proceed to the next step.

    Uninstall the drivers and software:

    Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

    Once the uninstall is complete, please continue on.

    Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    Installing the HP software:

    Click here to download and install the all-in-one HP Deskjet 2540 Printer series full feature software and drivers. Try printing and scanning.

    If the issue persits, continue on.

    Check the Apple updates:

    1. Go to the Apple
    2. Select System Preferences
    3. Select software update
    4. Click update now
    5. Install your available updates
    6. Computer restart

    Manually install the driver Package:

    Please click here to manually download the package from Apple update for v3.0 HP printer drivers. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

    Add device:

    1. click on the menu of Apple , then Preferences System.

    2. click on Print & Scan and then check if the name of your printer appears in the printer list.

    3. click on the name of your printer, click the sign minus (), then remove the printer.

    4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

    5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Laserjet driver is selected.

    6. click Add to add the printer to the list. Do not add the Airprint driver.

    7. try scanning using the ADF again.

    Published by Mr X-23source.

    Alternatively, you can scan using other applications.

    Please see this guide.

    HP printers - How to scan to a Mac (OS X)

    This document is for printers HP are OS X compatible and come with a built-in scanner.

  • Debounce counter signal digital filtering is not possible?

    Hey all,.

    When you read a flow meter signal at lower bitrates, the signal bounces. Because these bounces are count in addition to pulse correct, this leads to an output of counter unreliable. With a range of joint, I can see the behavior that bounces and determined that the rebounds are starting to occur around 100 Hz. The flow meter has to be in the order of 1500 to 10 Hz. remove all other devices of the system with the potential to influence the signal has no effect.

    Bounces produce both on the edge of the fronts and.

    Because I use a 9188 compactDAQ chassis and a meter module 9411, it seems that it is not possible to use the digital signal filtering? I want to establish that it is a correct assumption.

    When adding a digital camera filter (see the attached VI) I get the following error, explaining that the activation of the filter is not possible.

    Upgrade to DAQmx to 9.2.3 makes no difference.

    I read about using a meter of output to generate own impulses (with a high enough to avoid pulse width bounce) here. For me it is not an option that I don't have an output of the meter module.

    Are there other ways to get a correct count of edge output of the signal bouncing?

    Kind regards

    Bram bolt

    Dear Bram,

    You're right, digital filtering is not supported with the second chassis cDAQ generation (like NI 9188), I forgot that one (I tested with a chassis 0172 and worked well). What we can do is to measure at the same rate and filter the glitches in the software, please marine following example .

    Best regards

  • Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

    Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

    Hello

    Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

    Hope that helps!

    Kind regards

    Sheena

  • you just bought LR6 as I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

    you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

    Right click on the file Setup.exe and choose Properties option.

    Then click on the Compatibility tab.

    The value of the Windows 7 operating system and check.

    See the link below:

    trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  • Satellite Pro M70-113: not possible to write on CD - R and DVD-R

    Hello

    I have a Toshiba satellite pro m70-113 laptop.
    Playback problems:
    I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
    and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
    http://img64.imageshack.us/img64/9574/1bp3.jpg

    And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
    When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

    Write problems:
    After getting reading problems, I tried to test my drive writable.
    And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

    Although the same content when it is burned to cd - rw, it is a success.
    I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
    When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

    In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

    Please help me.
    It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
    Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

    Thank you

    Hello

    Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
    Usual it of not possible to fix this and the replacement drive is necessary.

    You can also consult the user manual. You will find a list with all supported and compatible media.

    I also found this topic in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

  • Example of analysis of spectrum at large problem band

    Hello world.

    I downloaded the example of analysis of spectrum to broadband and tried, but it doesn't show any of the spectrum.

    http://www.NI.com/white-paper/13882/en

    Configuration:

    Anritsu MG3700A ==> NI USRP2920 vector signal generator (connected to PC Windows7)

    FREQ. 10-50 MHz

    Power 0dBm

    Are there any suggestions?

    Hi Morse 1125,

    What driver version are you using?  I assume you are using version 1.0.  I looked in the RxHWParameters.vi block diagram nodes property subset since this is where the error message indicates the error comes.  There is a call to the Active Channel property.  This property is new for the driver NOR-USRP 1.1.  The driver update should resolve this error.

    You can find the driver 1.1 here.

    Update the driver, you will also need to update the firmware and FPGA image.  Here 's a knockout that explains how to do this.

    Let me know if this does not resolve the problem, I'd be happy to help you.

  • DVD burner does not recognize blank dvd inserted

    DVD burner does not recognize blank dvd inserted into the pc

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Possible redirection problem - Google redirect spy

    My Hotmail emails are no longer visible.  My research is rediredted to an offer to sign up for Hotmail sweeping. I beleve I have the Google redirect spy but I donlt know how get rid of it. I use Windows 7

    Hello

    You don't specify your Windows version, so the underside is mainly for Windows 7 - Vista is very similar.
    Use EXECUTE instead of start - search for XP.

    -----------------

    Check these:

    IE8 redirect problems - possible Causes and fix the redirect problem
    http://www.brighthub.com/computing/Windows-platform/articles/60039.aspx

    http://EzineArticles.com/?Google-redirect-virus-fix---how-to-get-rid-of-Google-virus&ID=2450094

    http://ask.MetaFilter.com/100853/Oh-that-nasty-Google-redirecting-virus

    http://www.GeeksToGo.com/forum/how-to-fix-Google-redirects-t267407.html

    ------------------------------------------------

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE

    IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
    installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
    possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right.
    Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask to
    It's here.

    Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
    not all are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Also get Malwarebytes - free - use as scanner only.
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    =========================================
    =========================================

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
    See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
    see your subsidiary local Support site.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Problem Insert apostrophe

    Hello. I have a problem inserting data in a form that contains an apostrophe, as a surname as O'Hara. I don't get any errors but after that the O is empty or trimmed. I'm not sure what I'm doing wrong. This is a MS SQL database. If anyone can take a look and help, here is the code:

    "< name cfquery = 'name' username =" "#application.datasource #" password = "#application.datasource #" datasource = "db" >
    Insert into the contact form
    (firstname, lastname, address, city, State, PostalCode, homePhone, as workPhone, e-mail,
    financialAid, former fighter, visa, list, programofinterest, howdidyouhear)
    values
    (< cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.firstname #" >,)
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.lastname #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.address #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.city #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.state #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.zipCode #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.homePhone #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.workPhone #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.email #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.financialAid #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.veteran #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.visa #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.list #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.programofinterest #" >.
    < cfqueryparam cfsqltype = "CF_SQL_VARCHAR" value = "#form.howdidyouhear #" >
    )
    < / cfquery >

    Your request code seems OK to me. Is it possible that another code is changing the values of your fields of form.xxxx? Can you put all of your code related to this issue? Have you tried using the generator profiles SQL Server tool to see what data is passed to SQL server by your query?

    http://www.petefreitag.com/item/674.cfm

  • IOS screenshot 10.0.2 - not possible

    Since updating to IOS 10, its not possible to make a screenshot using the home and power button.

    Someone at - it a solution for this problem?

    Thank you

    Rainer

    It works in the same way he has always done on my iPhone 6. Try to restart your phone and try again.

  • import playlist is not possible after updating itunes

    I installed itunes to 12.5.1.21 (OS Windows 10, German language). Now, it is not possible to import old/previously exported playlists more. The error message says something like (translated from German): "xyz" file cannot be imported, it seems, it has been exported incorrectly.

    Someone has this problem and are there corrective action do you?

    I have the same problem. All the Solutions!

  • Since updates to firefox, it is not possible to add a document to my email c Telfort.nl

    Since one of the most recent updates to firefox, it is not possible to add a document to my email address is Telfort.nl
    I checked with Telfort and no problems of this type are known.

    You can check the problems caused by the extension and plugins.

    You can try to delete the mimeTypes.rdf file in the Firefox profile folder to reset all the actions file.

    You can try to reset Firefox.

    Reset creates a new profile and attempting to import some settings of the old profile, leaving the old profile intact.

  • It is not possible to install Adobe Flash player 11.1

    It is not possible to install Adobe Flash player in the browser, it works without problem?

    There are 2 versions of Adobe Flash:

    • an ActiveX version for IE only
    • a plug-in version for most of the other browsers including Firefox
    • On a Windows system, you must always update both individually.

    You have the Plugin version 9.0.45 installed Firefox - a very old version. In modules > Plugins you should see "Shockwave Flash (version)".

    Make sure that your Plugins often-> http://www.mozilla.org/en-US/plugincheck/

    • We know only the Plugins the more popular/used by this page
    • page detects only installed, activated Plugins

    Install or update Adobe Flash

    1. With Firefox, click on the following link and SAVE the download on your desktop, so you can find it later. Clear all of the items on this page that you do not want to download (i.e., "McAfee Security Scan Plus"):

    2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
    3. Click or double-click the file that you just saved on your desktop
      • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
      • The button 'Install' in the lower right corner is now highlighted, click it.
      • Installation is quick.
    4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
    5. To the update/install the ActiveX for IE onlyversion, repeat the process, but use IE to go to the site above.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

Maybe you are looking for

  • Remote control does not work, and the load does not appear on Apple TV

    Hello I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted. Apparently that was the case.   He seems to have just died. I did pay for more than two hours and

  • USB2 on Satellite P30

    Hello How do I install USB2 on my computer? I read the manual and the satellite P30 and USB2 is normally available. But when I look in system/hardware I can not find any USB2. I also try to uninstall all the USB driver, but still the same situation:+

  • Open the file with notepad vi

    Hello I am currently working on getting version screws to invoke the node, but it does not work well when I do one. EXE, I am now looking for information to get the version of VI read as a text, I found the info manually for 2011 and 2012 screws but

  • Walkman / music app not canned music downloaded information

    Every time I have download and replace the default music news in my music application, after a while the data gets revenues to the default. My device is currently on the pacifier, Kitkat was the problem too heal

  • field in mv

    Hi allhope all are doing need well.i you people favor, my requirement is to add a field to a view, materialized in my oracle database, how can I achieve this, thanks in advance and your help is appreciated.name of MV: emp_mvname of the table: empname