Signature field detected - never, I added a signature field
Hi, when I open my PDF in Reader, I suddenly get a green bar along the top saying 'Field of Signature detected' Never, I added a signature field to a PDF. How can I remove this green bar? Thank you, Siegfried
Set detection pref here: http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/FeatureLockdown.html#Sig ningwithEchoSign
Ben
Tags: Acrobat
Similar Questions
-
This ii detected but not added so can not print it collects in Quebec City
Last day that it was connected through the wizrd sent by hp support but once again the printer disconnects or shows etc in offline mode, so I not UNHOOKED REINSTALLED AND the driver, even in this case failed to connect. This problem is commin after I upgraded to windows 8, pl. help me, thanks.
Hi KAPOORML,
Officejet 6500 what model do you have (E709 or E710)?
Follow the steps outlined in the document below and let me know if you're still having problems installing this printer?
-
I ran 6 Photoshop on this computer (32g ram (iMac 2015) - el capitan 10.11.3) for about two months. I shut down my computer two days ago and now photoshop will not open.
When I click on the start icon icon begins in the middle of the screen with the logo and Adobe Photoshop CS6 icon and the option 'Add Extension... FastCore routines"just below.
I tried opening without having to install the extensions. no luck
all other programs seem to work correctly.
not a subscription based CC.
Turns out that my best option was to uninstall the program and download and re-install. Worked but pain at the moment... I hope that this will not continue. If you run a Mac and you have the full version of photoshop - here's what I did to fix my problem.
file - file Adobe Photoshop CS6 - uninstall an application (run it)
Go to the adobe site and download your version - check the serial number. Other downloads
hope this helps someone else...
-
Calculation field not updated until I add something?
Hello
I created a PDF form to act as a purchase order.
Each line has a number of product, product name, quantity, unit price and total based on how I buy. The calculation of the total price works very well at the end of each line.
However, at the bottom of the last column (total price), I have a total cost field, which is the final cost of all (sum of all fields in the total price).
The problem is the field on the bottom (total cost), do not accept the last calculation that I do in the last row. I have to start a fake in the following line, and then delete this one to get the total to be correct? In other words, the last line, fill, never gets added to the Total cost? I tried to click on the Enter key or return or Tab... but nothing. I have to add an amount of false to the line right underneath the last of them to get the last calculation to add to the total.
Is it possible to add some sort of field validation button so that when I did it and I hit him, the total final is available in? Other wise, I will add that amount wrong number, press tab, then the total is good and I have to remove it. Seems very strange... has anyone else had this happen to them?
Thank you!
Babs
The field calculation order is incorrect. Set it to anything that makes sense for your form. In Acrobat 9, go into editing mode and select forms: forms > edit fields > Set field calculation order...
-
TrojanDropper; Win32/Dunik! RTS - or files affected not given
Whenever I run a full scan with the Microsoft Safety Scanner, it tells me that TrojanDropper:Win32 / Dunik! RTS was on my computer and PARTIALLY REMOVED.
However, he didn't tell me which file or files are still infected causing. No file name is given - just that this Trojan horse has been partially removed.
When I do a full scan with Windows Defender, it tells me that my computer is clean and works normally! When I do a full scan with Spybot Search Destroy &
or of Malawarebytes Anti Malaware, I get the same results - nothing about the infection by TrojanDropper:Win32 / Dunik! RTS - computer clean.
I'd appreciate some answers on what is happening on? And how I can scan Microsoft security to revome completely this Trojan horse? I tried scanning mode safe as well - same result.
Thank you.
TrojanDropper:Win32 / Dunik! RTS
MMPC threat results
Technical information (analysis)
TrojanDropper:Win32 / Dunik! RTS is a name used for the detection of Trojan horse that were added to our signatures after advanced automated analysis.The generic nature of this detection means that the malicious behavior of files detected as TrojanDropper:Win32 / Dunik! RTS are highly variable and may vary once an instance of this detection to another.No further information is currently available on this threat. However, if we receive a large number of reports, then a specific detection will be added to our signatures and a detailed analysis will be added to the encyclopedia.Note: Detection of files reported as TrojanDropper:Win32 / Dunik! RTS were added to our signatures after advanced automated analysis. If you believe that this file has been reported in error, we encourage you to submit the file assigned to us for further analysis. Don't forget to indicate that it is perhaps incorrect detection by checking the box and adding a note in the comments field of the submission form.Trojan Downloader/Dropper
A form of Trojan that installs other malicious files on the infected computer, either by downloading them from a remote computer, either dropping them directly from the copy contained in its own code.It is only partially deleted is because it is packed (usually a .zip file) with other files that may or may not be malicious, and it can be a file validates that displays charaterisics to aTrojan dropper and err on the side of caution only that specific file was deleted. Sometimes an error may also be displayed statng the file is too large to remove. The removal process can also be impeded by Spybot and MBAM providing protection in time actual resident.A Google search indicates a Microsoft security software to be the only ones to detect this particular malware named.You do not have any resident antivirus real-time on your computer. You rely on Windows Defender, Spybot, the free version of Malwarebytes Antimalware and occasional scanning with Microsoft Security Scanner for security? None of them alone or in combination provide adequate protection against all forms of malware. Consider using Microsoft Security Essentials (http://www.microsoft.com/en-us/security_essentials/default.aspx ), Windows Defender will be disabled or uninstalled during the installtion of MSE as it becomes redundant. See below.Windows Defender and Microsoft Security EesentialsIt is recommended that if you use MSE you disable the function of Spybot's Tea Timer and only use MBAM to on demand scan.Be sure to read if considering the installation of MSE.Checklist for installation of Microsoft Security EssentialsSpecial attention to the current and previous software antivirus in time real and good LFR lbefore installing MSE.If you want to try a different anti-malware for complete removal program I would say Dr.Web CureIt.Recommended action would be to seek any other form of assistance Microsoft. See the following:How to remove "TrojanDropper:Win32 / Dunik! RTS' and Trojan: Win32 / Dynamer! DTC.
http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/how-to-remove-trojandropperwin32dunikrts-and/5dd3f92e-18f0-402e-997b-4d3af67011d0I hope this helps. -
Satellite A - CD/DVD drive problems
Hi guys go crazy...
I have the following questions, trying to burn a cd or dvd. Sometimes I'm not recignise the disc as a blank disc ready for use, sometimes it burns then shows nothing on the disc, sometimes it burns more than one disk then fails, sometimes it works perfect...
Today for example, I put in a 6 discs tried to copy the data off hd then failed, 7th disc works fine. Then when I go into the program, he suddenly used recignise of blank discs, I'd caution saying cd/dvd inserted could not detect with success, there is no logic to it... several times I went in only ashampoo and it does never no cd burner device detected, never had this before... Sometimes I questions with him rarely find a dvd that I have to put a few times and then he found it.
Im not sure if its related, but I have this error came as well, or what it is - this related to?
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6000.2.0.0.768.3
Locale ID: 3081More information about the problem:
BCCode: d1
BCP1: 02DAA3C4
BCP2: 00000002
BCP3: 00000000
BCP4: 8AD7707C
OS version: 6_0_6000
Service Pack: 0_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\Mini051209-02.dmp
C:\Users\Ryzie\AppData\Local\Temp\WER-81635-0.SysData.XML
C:\Users\Ryzie\AppData\Local\Temp\WER71B5.tmp.vers ion.txtRead our privacy statement:
http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409I ran a cd cleaning through it no help... tried to diffΘrents cds and dvds without help, install windows from scratch twice and update some software, used software of different formatting and options.
I have restored the backup disk computer not better, I updated the package value drivers and silent dvd software. I tried to burn in Explorer, nero, shrink dvd, ashampoo buring etc etc... Still get mixed results.
Im not sure if it's a hardware problem or software, I've never had a problem with it reading true copy DVD, sometimes probs wih burned those but if I put it six times, it works.
Any ideas, im wasting a lot of CDs and DVDs with my failures...
Hello
Burning questions of CD or DVD are mainly related to a non compatible drive or finally it may be really a hardware problem (ODD).
But first, you should check some different discs from different manufacturers.I had similar problems, but since I use the R TDK (CD and DVD), I have not noticed problems
PS: I use Nero too. in my opinion the best burning software
See you soon
-
Lack of controls at the first HP
I know that HP Premium is not an HP 50 G upgrade, but in the absence of better information on the plans of HP, everyone is looking to the first as the new flagship of HP Calculator. It is reasonable to infer that first HP includes all the commands that are available in the HP 50 g?
I am looking for the following 2 commands: ZFACTOR and DARCY. They are not in the catalogue of the first HP and are not mentioned in the User Guide. They are available at all?
Thank you!
> is - this reasonable to infer that first HP includes all the commands that are available in the HP 50 g?
N ° and the 50g has no orders or ability first. Basically, these sepecific very specialized type of field controls that are remnants of the 48 series or earlier is not a priority. Especially since the vast majority are so darned easy to do as a user program because they are basically just a simple function that gets evaluated. Another good example is the F0λ function.
Neither of those two you mention are in the system.
Note that this does not mean they will never be added, but first is defintiely not marketed to the same users that (again) after so many years has found the 48 series absolutely perfect for them.
-
How can I increase the attack in a multi-line text box?
Is this possible?
I found this ad a few years where someone has asked a similar question:
http://forums.Adobe.com/thread/286972
This feature has never been added? If this is not the case-how can I make the code work posted in response to that post? Just hide the lines would be a good alternative, I think. I tried to add the code to my existing PDF, but seems not to do anything, the lines are still visible when you type in the field.
No, leading to control has been added and it probably never will be.
The code at this other thread is not complete because the functions that it calls are not displayed. They are not integrated. Here is a link to a document with a multi-line field that behaves in this way: https://workspaces.acrobat.com/?d=AG6oZ3bi3DYHokxDPeWN7A
There are several small scripts in various events that control the behavior.
-
Send photos to iCloud sharing album
I tried to download nearly 500 photos to an album shared on iCloud, however, he transferred only 76 and when I try again to add more he said, however, share a lot of photos (I tried with lower amounts at first) it says sharing 2 (lets say) photos in the upper right corner for a long period of time , but then the photos are never actually added to the album... extremely irritating
Try the steps suggested here- iCloud, sharing photos - Apple Support
-
I bought this computer from office a little over a month there are at Best Buy as a "open box". They assured me that the factory warranty was still in effect, but according to HP, it has expired, so I didn't get any free help. The problem I have is upgraded to wINDOWS 10. I tried 4 times now and downloaded a new Microsoft Installer every time (all are different sizes!), but each has stopped at 24% installation and 82% copy of the files. It tells me that there is something on the HDD that stops this install... any ideas what? Or how to find it? I tell myself that I am just stuck with Windows 8.1, the same thing that I finally had to stay with Windows 7 on my new laptop last because I could not upgrade to Windows 8 either!
The fact that I did not support HP saddens me, but it's too late to go back now, it seems that I have to pay a lot of money using HP or just do without! That seems hardly fair to me, since this is / was probably a floor model, and nobody had ever on the Internet for viruses etc and never anything added to this plant. So I guess I have to just this chalked up to experience (a bad one, I might add) and learn to live with it.
The computer works fine with Windows 8.1, but sooner than later, Microsoft will stop away from giving the upgrade and also stop supporting all less than 10. So, I'm sure that there is someone out there who could help me, but is finding that person who is my problem. H E L P!
Just to smile and laugh. I tried upgrading the fifth time... new downloads too... this time he locked himself in the exact same place as before, so I just shut down the computer and went to bed! The next morning, when I turned the computer on a screen came up with an error number (it was the first time this happened) so I entered this number in Google and came to a solution. He told me to remove all of the added devices that I had added once I bought the computer and try again.
Not to sound like I'm so smart, but this was to be my next attempt to get this update to 'take', but it was... honest! The error message has confirmed my suspisions, so I followed him. And it worked this time!
HP hear on my problem and I responded with 3 emails which were unanswered, and finally a letter at the post office cancel the ticket due to no response. No help came by HP. The people here on this forum have been very helpful and concerned about my problems. They did their utmost to help me, but it isn't fair, I guess.
Finally, my problem with the whole thing guaranteed was passed from one person to another at HP, and I'm now emailing to the terminus of the chain. I'm learning that HP does not have ANY Open box or returned items. However, Best Buy put info to the factory warranty on the sticker of the Open box that was on the side of the computer. This particular computer was only a screen of store shelf. He never left the store and at most could have a "demo" on this program to show the clients capabilities. So, indeed, HP means that they do not trust Best Buy about any changes made to the computer by them. I guess I could and SHOULD probably continue this all the way with Best Buy, but I'll probably just here, with a warning to ANYONE buy anything "Open Box" of ANY store in the city. If I had known that he had absolutely no warranty at all on this computer unless I bought an extra, would I have spent more than $700 for this? I seriously doubt that! He wasn't connected yet, so it may have been even completely 'dead '!
P.T. Barnum says it all... "There is a sucker being born every minute." And there is also the cliché "buyer beware." And also "you only get what you pay..." I learned a valuable lesson. The hassle that ihave had to endure because of the purchase of an "Open box" were certainly not the few dollars I saved buy buy this way. And everyone, notice that Best Buy can only provide a guarantee of factory on ANY issue "Open Box", although says that it is available on the sticker.
I should probably sue them only!
So, it's the end of my story on the upgrade of Windows 10. I hope everyone enjoyed my short biography and maybe learned something from my mistakes! This false advertising MUST be stopped! Do not hesitate to reply to this message if I am good or bad... or just...
Omahamike
-
Why is the "Called" property returns a name with *: Instance: 0?
I'm building a VI that returns a list of all the side screws and their auxiliary screws, etc., a given top-level VI. I first open a reference giving the path to the top-level VI, and then use the property 'Called' to get the subVIs. I then (in a loop) get all each Subvi conscripts by opening a reference using the name of the previous output called string. I noticed something when I ask for conscripts by the string name of XYZ.vi, that I get all its subvis, but I also have a XYZ.vi:Instance:0 name returned. What is the purpose of the proceeding: 0 and why is it happening? I like understand why Instance: x would never get added to the name, and also why VI would return his name in the property called? The VI is not defined as re-enterent or calling themselves dynamically or anything like that.
Hope someone can explain that.
Thank you
James
Hi ejb068,
Hello and I hope that your well today.
I continued to study your issue now I am back in the office, with my LabVIEW machine and resources OR. I concluded and also since found a confirmation of this issue.
For a first level VI which has a few express screws on its block diagram, the names of the callee property currently includes a single instance of the upper level for each express VI VI.
For example, if a VI has two ExpressVIs in the block diagram. The property called node will return two instances of the toplevel VI.First level VI = mainVI.vi
Express VI = delay
Result name called: mainVI:Instance0 (number lists according to the order screw Express are deleted from the diagram.)
: first level VI name: InstanceX
The problem is if you use VI server that this name is not valid - and causes a VI Server error. So I think it would be pretty safe filter these names.
Please let me know what you think,
-
It is a very weird problem...
All computers are Windows XP with SP3.
I can't install new hardware on computers. When I plug in a USB keyboard or USB drive, the computer detects it and adding new hardware pop-up... and every time Assistant and he told me he can't install the new hardware.
I tried with several (work) keyboards, mouse, external hard drives, flash drives all with the same result.
The keyboard and mouse that are currently connected to the computer very well - work however, if I unplug and plug it into another USB port, they stop working too (probably because they are recognized as new hardware for Windows at this time), until I plug them into their original USB ports.
In the BIOS, all new and existing keyboards work fine. I also started a live CD of Ubuntu and all existing works and new material perfectly well there too.
I uninstalled the USB devices from Device Manager too, but there is no change.
I connected a PS/2 keyboard, which works fine in the BIOS, but then when I get into Windows, it stops working like the rest nine.
I tried to start safe mode, but no change is.
And Yes, I am an administrator on the computers.
On one of the computers I tried to do a repair of Windows by using the Windows XP CD. I am able to boot from the CD and select start Windows repair. However, when I get to the part of the facility where you can only select your language, NO keyboard or mouse work, and I'm totally stuck at this time. Then I had to do a clean install of Windows on this computer, and everything's fine. But I can't really do it to my other computer.
I don't know what else to try. Any suggestions are appreciated!
Hi BatmanBob,
- You have security software installed on the computer?
- Do you have a group policy on the computer?
Step 1
You can also try to temporarily disable the security software of the computer and try to install new hardware and check if it installs. If you are able to install, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.
Step 2
You can also put the computer in a clean boot state and check if any third-party application blocking installation of the equipment and try to install the drivers in a clean boot state. Access the link below and follow the steps to solve a problem by performing a clean boot in Windows XP.
http://support.Microsoft.com/kb/310353
You can also communicate with the system / network administrator to check if there is some group policies for installing the drivers and change it.
If you are still having the same problem after following the steps above I suggest you to send your issuein the TechNet community, given that the computer is on a domain network. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot add files to Clip + but no error message and Clip Sport works fine on the same machine
I used successfully the Clip + 4 GB for years without any problem, currently using Windows 7 Prem 64 bit. Now when I try to add files using MS Explorer it shows the added file (in the Green window scroll bar) but never ends adding the file! I waited 15 minutes for a short file without success. Also, I started to use a Sport Clip 8 GB and it works fine, just can't get the Clip + to add more files. I can delete files and can also use files that remain on the Clip + but can not add new ones. Any help would be greatly appreciated! Thanks in advance.
I tried to reload the firmware and this time it worked well and is not only all my old stuff still on the Clip + but I was able to add a small file without problems and properly access all folders of files, so THANKS for the suggestion and the problem solved! BTW, I had 318MB of space on the Clip +, not KB... Sorry about that
-
I have a sansa fuze version v01.2.31s. I have problems when I sync playlists from windows media player 11, using my windows xp compaq evo n600c laptop.
WMP goes through the process of synchronization wrote the music to the "rocket" the reading list is not displayed.
I have tried many things to solve this evolution usb format, formatting of the "rocket", update the firmware to the most recent available, but this did not help.
I have also tried on another computer using xp and get the same problem.
When I open the fuse in my computer it does not recognize the 16 GB sd card either.
I wonder if the link is broken and or I have missing files files
can someone help
see you soon
Auto Detect is only good to detect the Windows Media Player. Songbird not - or Media Monkey or Jet Audio, or iTunes, Winamp or any other music library program out there.
Media Monkey syncs to the Sansa if you follow the instructions in Media Monkey. It will be in Winamp. I think that a person has yet found how do it with iTunes. Maybe Songbird will be too - but it is up to the developers of Songbird and they need to explain it to you somewhere.
It is, shall we say, unrealistic to expect itty bitty brain of the rocket to be able automatically to every piece of music software process that anyone comes with, especially if it is more recent than the "rocket". This isn't what Auto Detect never promised.
Personally, I use MSC and drag-and-drop.
-
Question about place 11 dock Pro
I don't know if anyone has an answer to that. The coming Pro 11 dock also supports the Latitude 10 ST2? And the dock for the Latitude 10 ST2 will support the coming 11 Pro? The connectors are the same, although the output power of the power adapter are different.
I'm just very disappointed with the charger for the Pro 11. I had to replace 2 so far. They start very well but eventually will be will not charge more than 3 watts. I have a Latitude 10 ST2 dock flying over and it would be great to use instead of the USB micro-connecteur.
Look forward to your responses!
Mike
michaelahughesI don't know if anyone has an answer to that. The coming Pro 11 dock also supports the Latitude 10 ST2? And the dock for the Latitude 10 ST2 will support the coming 11 Pro? The connectors are the same, although the output power of the power adapter are different.
I'm just very disappointed with the charger for the Pro 11. I had to replace 2 so far. They start very well but eventually will be will not charge more than 3 watts. I have a Latitude 10 ST2 dock flying over and it would be great to use instead of the USB micro-connecteur.
Look forward to your responses!
Mike
Not officially. You can load on it although if you try to load a place 713 x on ST2 platform you might encounter problems due to the lower voltage adapter. If you simply reload while not using it, you should be OK. If you are actively using the device that you could actually see the battery draining even while on the dock. Some ports will work, others do not. Original plan was to support, but the issue of the tension which has killed so full support has never been added/tested/claimed.
Maybe you are looking for
-
HP laptop - 15-r100nia: HP laptop - 15-r100nia
Hi, I own a HP for laptop - 15-r100nia. I installed Windows 7 on it, but I kept getting a blue screen. I tried the 32 bit and 64 bit, but I still face the same problems. I will like to know why this happens. This system is compatible with Windows 7?
-
Big problem with 1.01.15 firmware
I use a lot my rocket for podcasts, particularly those of the BBC. After upgrading the firmware, BBC podcasts now playing at the wrong speed, too slow, such that the audio tone is distorted. A bit like an old record or tape being played at a slow spe
-
BEFSRU31 - connected to the router, but can not browse the internet.
Hi, I had this problem in the last three months. I share a Linksys BEFSRU31 with my friend. However, once or twice a week, or even more frequently, the router suddenly ceases to send data to my computer. However, my roommate still receives data. So I
-
Everything is great: change my screen resolution
original title: evrything on my computer is great, I tried to go into the perfomance and change the DPI to 96, but it won't work. I went in performance and tried to change the DPI to 96, but I will not change.
-
I have a little asus Eee pc seashell series running windows 7 edition starter and when I start now it tells me that my copy of windows may be illegal