Similar Questions

• What I want to do is CC get off my computer and use new CS6 - but now I can't use CS6 even after removing all creative Cloud applications and running Creative Cloud Uninstaller and soft cleaner - SHAME!

  I want this shit on my computer - creative cloud is a load of garbage and I want to start using new CS6 - without subscription fees, hassle-free.

  Uninstall all the programs/applications cs6 and cc.

  clean all cs6 and cc by http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  reinstall your programs cs6.

• Set the signature using the API field only

  I have a situation where all PDFs you signed are created for each customer individually and on the fly.

  I must be able to define the scope of the signature using the API only.

  Is this possible? I can't change the pdf file and add any kind of labels. It must be done using an x, the value of the coordinate y.

  Hello Lawrence,.

  If you are looking to set the fields of the form through the API, you can see below reference material:

  https://secure.NA1.echosign.com/public/docs/EchoSignDocumentService21#FormField

  Kind regards

  -Usman

• Download the signature using the API and pre fill the signature

  I use echosign api to display forms to get the candidate (which comes on our site). We show the form of widget. We use more than 40 forms. It is difficult for candidates to sign all forms. Is there anyway I can get the signature of the candidate and pre fill out the signature using the API?

  If not, is there another way to do this?

  NOTE: Candidate - not a user in echosign

  Hello RajkumarMohan,

  By default, it is always required by the signatories to give their signature any document esigning. Even with the API, it is not possible. If it is a single widget with several fields of signature, once the signer signs a first field, and then when he clicks on the second field of signature, the signature is automatically populated in it.

  Kind regards

  -Usman

• Can I sign a document with my digital signature using professionals DC smart card?

  Can I sign a document with my digital signature using professionals DC smart card?

  You mean certificate on your smart card, right of signature? If the certificate on your smart card is designed to sign then the answer is "Yes, you can. CA that issued a certificate place some fields that can restrict its use, say, as well as encryption, only signature or authentication of the server only, etc. The certificate on your smart card doesn't have to be no restrictions to use incompatible with signature for you to be able to sign with her. You can simply try to connect your smart card and watch if Acrobat accepts the certificate for the signature.

• How to add a row in a computer using New-disk virtual hard?

  Hello

  I am running powercli 5.0.1 build 581491 and I'm writing a powercli script for:

  (1) create a RDM

  (2) assign the RDM to VM1

  (3) assign the same RDM to VM2

  I am able to create the ROW and assign it to VM1, but I am unable to use "New drive" assign to VM2.  Using the following command, I am able to create the ROW and assign it to VM1.

  New-disk-hard - VM VM1 DiskType - RawVirtual /vmfs/devices/disks/naa.60000970000192603729533030353531 - DeviceName

  While trying to assign to VM2, I do the following:

  New-harddisk - VM, VM2 - DiskPath ' [san - datastore:1] vm1/vm1_1.vmdk.

  And I get the following error:

  New-hard drive: 06/06/2012 14:13:19 new-support device Incompatible hard disk specified for the device '0'.

  What I realized, is that if I create a regular vmdk file, then use the New drive using the '-DiskPath ' option, then the command works well.  So my question is, what is the command to add a ROW in a virtual machine?

  Thanks in advance.

  No, indeed it seems something wrong with the cmdlet New-disk hard when adding shared RDMs.

  I have the following, which assigns the RDM common to both virtual machines.

  It's more or less the same, what you've seen in Onyx, but it adds the RDM shared for two virtual machines.

  $vm1 = Get-VM -Name VM1 $vm2 = Get-VM -Name VM2
  $DeviceName = "/vmfs/devices/disks/naa.600507680180701ed00000000000124" 
  
  $hd1 = New-HardDisk -VM $vm1 -DeviceName $DeviceName -DiskType RawVirtual $ctrl1 = New-ScsiController -HardDisk $hd -BusSharingMode Virtual -Type VirtualLsiLogicSAS
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.DeviceChange += New-Object VMware.Vim.VirtualDeviceConfigSpec $spec.deviceChange[0].device += $ctrl1.ExtensionData $spec.deviceChange[0].device.Key = -101$spec.deviceChange[0].operation = "add"
  $spec.DeviceChange += New-Object VMware.Vim.VirtualDeviceConfigSpec$spec.deviceChange[1].device += $hd1.ExtensionData$spec.deviceChange[1].device.Key = -102$spec.deviceChange[1].device.ControllerKey = -101$spec.deviceChange[1].operation = "add"
  
  $vm2.ExtensionData.ReconfigVM($spec)
  

• Instantiate using 'new' does not not on the init() method

  Hello

  I am instantiating an object using "new" and calling my init() with 4 parameter passing constructor, but I get the error message that the parameters are required (see below). It works by using "createobject", that's fine, but I wanted to use 'new' to create an object. Can someone give some info why it doesn't work? Thank you.

  The SHOPPINGCARTDSN parameter to the INIT function is required but is not passed in.

  < cfscript >
  o = new cfc.shop.discount () .init (shoppingcartdsn: 'test', localDSN: 'timerDelegate', starsDSN: 'testdsn', ProjectName: 'test');
  writeDump (o);
  < / cfscript >

  You do not have to call the init method when you instantiate your object with the new. This is done by the new function itself (even with parameters, pass the parameters to the object, and not to the init function)

  Try this:

  o = new cfc.shop.discount (shoppingcartdsn: 'test', localDSN: 'timerDelegate', starsDSN: 'testdsn', ProjectName: 'test');

  writeDump (o);

• Can I use the same key signature for the WebWorks bar and bar of the Android app?

  I have applied the signature key for my WebWorks Playbook applications, works without problem.

  Am I able to use the same key to sign transformed Android apps?  Tried several times and always got error: invalid password, while the same key/password works fine with Webworks bar signature. Don't know if I did something wrong or I have to apply a new key for the signature of the Android app.

  Thank you

  Yes.  This is discussed here: http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/What-happens-when-the-signing-cer...

• Previously used signature keys in Webworks 2.3.1.5 SDK installation

  I just got new key signature and registered using them with my WebWorks 10 1.0.2.9 SDK

  I'm trying now to copy the sigtool.db and the sigtool.csk in my WebWorks 2.3.1.5 SDK

  I tried several guides, but everytime I try to sign my app signer tool rises following and I get the following error for each .cod which must be signed.

  Contact the signer and register with signing authority.
  Path: C:\Users\**\AppData\Local\Temp\widgetGen.###.tmp\xxxBlackBerry.cod

  Above, you are referring to the COD, for BlackBerry OS 7.x files and lower.  The .csk and sigtool.db files are only used to sign applications for this platform.

  BlackBerry PlayBook and BlackBerry 10 uses a different type of key.  If you have not requested an installed them (they come in the form of files .csj instead of .csi) you will need to order a new series using the code signing key order form.

• How can we recover the feature "Custom URL in a new tab" I had 12 v using new tab add-on?

  I REALLY need because I wrote my own custom web directory that I use throughout the day. It seems that the new behavior of new tab should be OPTIONAL. I had to go back to version 12, because it adds a few clicks whenever I ask a new tab much, several times a day in my work. I used the new URL of the tab add-n and it does not substitute the new feature.

  If you want to open a new tab in a some URLs (like www.google.com or another site) go to Subject: config find/type browser.newtab.url , double click (or right click on it and select Edit) and type the url you want. Whenever you open a new tab, you open it in this url/site.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Cannot use new external TV as a monitor for my Satellite P100-240

  Hello

  I have connected my Toshiba to a new Panasonic LCD 32 '' via a VGA cable.
  When the computer starts, I get the standard Toshiba opening page, then the opening of Windows XP on the TV, but then nothing when my laptop start.

  When initialization is complete, I don't get the same office as the Toshiba on my TV BUT no icons etc, simply on the desktop.

  If I change the screensave on the Toshiba, it changes on the TV, so I'm getting a connection.

  Any advice or help is greatly appreciated.
  I tried the usual things (e.g. check box to extend my desktop to this monitor)

  > When initialization is complete, I don't get the same office as the Toshiba on my TV BUT no icons etc, simply on the desktop.
  The icons don t appear on the external TV because you have extended only the desktop on the external screen.
  If you want to have the same screen as on the internal display, then you must use the FN + F5 key combination to get the same photo!

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• Satellite L500-1WR - cannot use new Intel WiFi card

  Hello

  Purchase card Intel WiFi Link 1000 (112BNHMW) Mini PCI-E. Installed in place of the stock of Realtek. Windows has found the new device, I downloaded and installed the latest Intel driver (Windows 7 64-bit). But the Wi - Fi card does not see any wifi network (G ~ 12 networks and N = 1 networks around me), trying to troubleshoot-made the question by troubleshooting of Windows GET the message "on this computer's wireless capability is turned off" However the WIFI is enabled in the BIOS and the orange LED is lighting. I downloaded the utility of wireless control of intel, the Swith WiFI possible software option is just disabled (grayed out in the menu)

  Laptop is locked for use only Realtek RTL8187SE? Or Intel does not support some "physical interfaces" to turn it on?
  Is there a list of WiFI N Mini PCI-E adapters compatible with this laptop?

  Thank you

  Hey,.

  The question is why you have installed another wireless network card? In my opinion, it is not logical because the preinstalled Realtek card is tested with your laptop and works correctly. In addition there is no difference between the wireless network cards

  If the wireless network adapter is enabled, press the FN + F8 key combination. This can enable/disable the WLAN functionality.

• Using 'New data value reference' in a loop

  Hi all

  I just read on the data value references (DVR?) and I'm trying to use them with overall functional (see table).

  I don't think that I'm just doing.  The final goal is a producer/consumer nickname.  My concern is that I don't feel the implementation of the new primitive data value reference and re-stuffing the result in the FGV, should occur in each loop.

  Of course I could "spread" data with a single gueue element (where the queue of new data would take place each loop).  I just thought that I would play with them.

  

  Beavercreek wrote:

  I think that we defend the same point, but I can't seem to understand why this does not work the way I expected.  I discovered the DVR (and queues) as a pointer, simply a way that the other vi can know where the data is located.  The data that we are after is here.  So, why Ch1 does not work in the data_reader.vi?

  If we can get Ch1 to work data_reader without re-creating and re-writing of the reference in the FGV each pole (what does Ch2), we find no more what is wrong with my vI or I'm going to learn something that is still beyond me.  I hope to hit me in the head this afternoon still

  You are missing a fundamental idea: the function you call creates a reference that points to a specific value. To actually interact with this value (read/write), you need to use the structure of the International preliminary examination. At this time what you are creating a single reference for ch1 (which do you nothing with) and creation of multiple references to ch2 (where at each iteration that you replace the reference in the FGV, so you basically lose the old reference), so instead of having two DVRs, you really N + 1 DVR (where N is the number of iterations of the loop runs).

  For your code works the way you want, you only need to create two digital video recorders (probably before the loop), then bring them inside the loop and use the structure of the International preliminary examination with nodes in R/W DVR to set the value in the DVR.

  For example:

  

  Other problems with the code, but this deal the DVR issue.

• Trouble using new users accounts

  I use Windows Vista Home Premium; service pack 2 and the latest updates are applied; UAC is on.

  I have an administrator account that works without any problem.

  I can create new accounts, but the connections never completely loading the desktop.  When I create an admin account will identify and present a blue screen.  Explorer.exe is not running in the Task Manager.  To launch the Explorer by the Task Manager, I have to show processes for all users.  Once Explorer.exe is running, the desktop appears.  If I turn off the UAC, the administrative login works as expected.

  The standard account gets me until the blue screen when I login and UAC is on.  To launch the Explorer, I have to provide administrator credentials.  The Task Manager doesn't let me launch the Solution Explorer or view the entire process if I turn off the UAC and the connection.

  Prefer not to do a system restore.  Any suggestions to solve this?

  Thank you

  R_Webb

  Finally figured it, using Process Monitor from http://technet.microsoft.com/en-us/sysinternals/default.aspx, Sysinternals web site.

  (1) log in windows by using the Administrators account broken.

  (2) launch the Task Manager.

  3) tasks, file, new task (run), Manager launch procmon.exe, filter to include explorer.exe.

  (4) from the Task Manager, run explorer.exe.  When the process fails save the process monitor, so you can compare it to another process monitor file.

  (5) on the Task Manager process tab select display processes for all users, this will force use of the admin token in UAC.

  6) start new procmon.exe and filter for explorer.exe.

  (7) start explorer.exe.  After the office ends the loading (and no visible new lines are added to the display of process control) save the process monitor the results to another file.

  (8) compare the differences between the process monitor files collected in steps 4 and 6.

  In my case, I found that the process in step 4 will not open two registry keys in HKCR CLSID tree.  Frist was for the 'Flyout DateTimeCPL class' and the second was for "Shell Rebar BandSite".  Further investigation revealed that the users group had not read access to objects in HKCR CLSID.  Regedit shows the permission assigned to a group called RESTRICTED (I always do research it).  In any case, grant users permission to read on HKCR CLSID solved the problem.

  Many thanks to Bruce Cogswell and Mark Russinovich!