Simple control issue!

Similar Questions

• I want to move a large number of photos but don't want to unique, click each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions?

  I want to spend a lot of photos (they are in order) but and do not want to have to click to move each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions? I know it's apple 101, but I don't remember what order to press the button command, or shift, or other. Thank you

  Select the first file, then hold down the SHIFT key, and then click the last file. Or, select any file in the folder and then press command + A

• "Graph - Simple" change issues to include several axes

  I'm changing the workspace "Graph - Simple" object to allow several axes. However, I was do unexpected behavior and I can't find a way to restore the configuration when the next load.

  1. Is there a way I can use the "Custom Data" variant in the Item.Data cluster to store the configuration?
  
  
  2. If not, is there another way I can do this work within VeriStand without having to re - develop a full graphical object (based on the free label template) just to add this feature?

  I am currently using VeriStand 2014, but I can be updated until 2015, if there is a new feature that would help.

  Thank you!

  You're very close to having the right answer, but what you call won't work, unfortunately. Overall, it would be nice to put data in the custom as attributes of variant data field, as long as you crush all VeriStand attributes can be expected otherwise. Even if you do this, however, there is no way to save this copy of the cluster of the top-level VI item data. I can't in any way you can get this to work.

  However, you do have to start from scratch. It is an available add-on here called Multi-Y chart with channels calculated. It has multiple scales are natively, but this is a graph open source with a superset of the features in the chart - simple. Here you could probably change to have two or more axes and find a good way of saving data so that it persists on the next load.

  I did not write this control and never used personally, but it might be a more open alternative to watch before thinking to start over from scratch.

• IOS App Remote - Volume control issues

  OK, so I downloaded the app recently released for Apple TV IOS. Everything works as expected, except the inconsistent Volume control.

  I have two Vizio TVs in my house - E701i-A3 and models M401i-A3. The volume via IOS app works perfectly on my E701i-A3 - pressing iPhone volume buttons triggers change in volume on the soundbar attached to this set.

  No luck with my M401i-A3 not set - by pressing the volume iPhone buttons does cause changes in local ringtone volume iPhone... that tells me something is not right with audio control EAC between ATV4 and the TV set. I do not use soundbar with this set - internal speakers only.

  Both sets are running the latest firmware of Vizio and CEC/audio is enabled. No problem to control the volume or turn the sets/turn off via the remote Siri material.

  Kind of ideas here... anyone have any ideas as to what the problem may be with my Vizio M401i-A3 defined? Someone at - it got IOS volume remote control works with other models of TV?

  Volume control requires HDM - CEC to ensure compatibility. It is quite possible that only one of your TV is compatible.

• DAQmx Multi channel simple control triggered Pulse

  Hello

  I work with a USB-6218 of to create a continuous reading and writing applications. The goal is to have 16 channels analog voltage reading, output 2 analog channels configurable throughout their range, 4 Digital Out channels configurable for high or low and 4 channels of digital output with trigger pulse single having adjustable width.

  The last part is the one send me in trouble. I have seen several examples of pulse train DAQmx configuration, but I was not able to find something on the unique triggered impulses. In addition, as the architecture of the VI, I wonder if this type of design requires a message handler in queue, given the different types of channels, that I need to control, or whether a Structure of the event in a While loop would be sufficient.

  Would appreciate any advice you can offer,
  Yusif Nurizade

  
  

• y500p, remote control issues

  the title suggests, my lenovo y500p VOLUME remote control does not work, specifically the volume and the mute button, the play, the buttons fast forward etc. etc. also does not work with wmp or wmc. The problem is that he actually used to work. Please help thanks.

  BTW, battery is new and the arrows works

  BTW has anyone noticed in lenovo y500p, when you close the lid to the upper-left corner of the laptop, it's not complete farm? Push down to hear a 'click' before she is fully closed, or is it just my laptop? THX in advance

  broken hinge question, lenovo contact hotline ask for replacement.

• How to send and receive simple controls USB?

  Hello

  Before you begin. I read om internet (USB tutorials, nuggets, etc) for 2 days get it.

  but it's really confusing and I still have no idea how to do that. So I ask for your help.

  I install a USB device in MAX.

  I need to send this command: 0x0 2 M 1 x 3

  Were 0 x 2 sets the start and 0 x 3 sets the end of the command.

  I think I have to use a transfer of control, but I do not understand what it takes to use the Index, the value of request,

  Request and length entries. I don't understand how sent Hex and ASCII and Dec at the same time.

  Should I convert these values?

  I would really appreciate some examples of code. Can I use the VISA controls?

  Bravo will be granted, thank you in advance

  Heinen wrote:

  I need to send this command: 0x0 2 M 1 x 3

  I don't understand how sent Hex and ASCII and Dec at the same time.

  Should I convert these values?

  I'm not sure of the Index, the value of ask.

  But on sending your comand...

  I guess that the space before the "M" and the space after the "1" is not necessary,

  but the space between the "M" and the "1" is required

  

• HP Touchsmart 600 - remote control issues

  I have 3 questions on the remote control for my HP TouchSmart 600, which works well for almost 4 years (not jinxies).

  #1 can no longer change the channel of the program guide.

  When I press the Guide button, the TV guide is displayed as expected. I can page up/down through the guide but when I press the button (the Center button on the remote control) to switch to the selected channel, it takes me to the library menu and position myself to the TV option saved rather than change the channel. He used to work. Note: I did take the trouble to restart the Live TV app like this seems to require to reach for the mouse.

  What I did or I'm doing wrong?

  #2 remote to 'enlarge' / 'restore down '.

  Is it possible to use the remote control to "enlarge" / "restore" in the Live TV window? Currently, I do it with my mouse.

  #3 remote sometimes loses focus

  I have never been able to identify, but the remote sometimes seems to lose focus. By this, I mean that it is as if the computer ignores all of a sudden. For example, many times I press the Guide button, the TV guide will go up but the up / keys does not work. I see that the computer receives the infrared signal because the blue light on the front flashes whenever I press a button on the remote control. Finally, after having rejected the guide and press different buttons on the remote control in a crazy attempt to clear the confusion, the remote control starts actually behave as expected.

  Advice would be appreciated.

  Thank you.

  Hi ou81aswell,.

  #1: looks like your remote can give wrong signals.  Have you tried restarting the computer?

  #2: no, the remote doesn't have this feature.  You will need to use the mouse

  #3: I've noticed that sometimes windows pop ups will steal focus from Media Center.  I found that by pushing the round button of Media Green Center of the remote control will take back you in Media Center.

• HP Officejet 4622 will not print simple controls because it does not recognize the paper size.

  Product: HP deskjet 4622 All In One

  operating system: Windows 7

  Software used: Quicken Starter Edition 2011

  My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.

  Someone at - it suggestions?

  xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.

  I hope this information is useful!

• Dragging control issues

  Hi friends, I'm a movable control, but I have questions.

  The first time, it works very well, but on the second attempt it return to its original position, and once again I can move it.

  It is very unconfortable :/

           ImageView {
  
           id: watermark1
           imageSource: watermark.imageSource
           property real dy: 0
           property real currentY: 0
           property real dragThreshold: 40
           touchPropagationMode: TouchPropagationMode.Full
           attachedObjects: [
               ImplicitAnimationController {
                   id: translationControllerY
                   propertyName: "translationY"
               }
           ]
           property real iniX : 0;
           property real iniY : 0;
  
           onTouch: {
  
               translationControllerY.enabled = false;
               //translationControllerY.enabled = false;
  
               if (event.isDown()) {
                   iniX = event.windowX;
                   iniY = event.windowY;  
  
               }
               if (event.isMove()) {
  
                   watermark1.translationX = event.windowX - iniX;
                   watermark1.translationY = event.windowY - iniY;
                   console.debug(iniX, iniY)
                   console.debug(watermark1.translationX + " and " + watermark1.translationY)
  
               }
  
           }
   }
  

  Can you help me?

  Thank you!

  Try this...

              onTouch: {
                  translationControllerY.enabled = false;
  
                  if (event.isDown()) {
                      iniX = event.windowX;
                      iniY = event.windowY;
                  }
                  if (event.isMove()) {
                      watermark1.translationX += event.windowX - iniX;
                      watermark1.translationY += event.windowY - iniY;
  
                      iniX = event.windowX;
                      iniY = event.windowY;
                  }
              }
  

• Version control issues

  Hello world
  
  Can someone please tell me how to create a copy of a project that can be opened, edition, etc without affecting the project we have in Visual SourceSafe? We strive to create documents printed from our CHM files, and instead of playing with our project work, we want to test a copy first. I copied the project in Explorer, it opened and got an of SourceSafe Options dialog box. We went to file-> delete the Version control and that the project work, away from SourceSafe.
  All I want is a copy of the draft to play with until we get it to look like we want to, and then make the changes in the working draft.

  This is a repetition of the procedure.

  To clone a project under RoboSource Control:

  1. a copy of the project.
  2 remove the following files from the root of the new project:
  -pblsvrs.sss (if applicable)
  -mssccprj.scc (if present)
  -projectname.cpd
  -projectname.pss
  3. in Notepad, open projectname.xpj.
  4 remove all entries between and , but let the two tags.
  5. close Notepad, and then save the xpj file.
  You now have a project that is removed from the source control.
  6 open the project in HR and rename the project.

  You now have a new independent project.

  G

• Tap simple trackpad issue integrated

  You just bought Macbook Air MMGF2HN/A. There the last OS X El Capitan 10.11.5. Having some problems with the only tap water in the built-in trackpad. Sometimes (not often) the single tap doesn't work. For example, I tap on a tab in an application, but tab does not open (and I must add, the app was 'active', he wasn't running in one window behind the other).

  In my opinion I don't think that it's a hardware problem, rather, it may be a software problem. But it is, of course, very frustrating for a camera of 2 days.

  Open system preferences > trackpad > point & click > check the box: Tap to click with a finger.

  

• ThinkPad 10 support and quality control issues: Moderator/Support, help please

  Please ignore, or even support/moderator - I don't want to waste your time

  Hello

  I got a Thinkpad Tablet 10 Thursday directly from China. The Tablet has a manufacturing defect. There is a piece of land under the layer of glass/digitizer, but higher on the LCD in the middle of the screen. Since I had the Tablet, we have taps ghosts since the beginning of the unit for the first time. This morning, I started the unit to see that I have no sound. There are sound through the headphone jack, but not the speakers. I have completely restored the tablet to nine after that. After the factory restore, the unit still has no sound.

  I called twice to take charge in Atlanta. The agents were nice, but both finished transfer me to an extension that hung up.

  Unfortunately, this is not the first time that I had problems with Lenovo. When the TPT 2 came out, I bought a. The first unit was a problem of speaker and sent repair. The party remained on order for a week. It turned out that the part will not be available for a month. After that, an agent has replaced the tablet with one of the CEP. The second Tablet has arrived and would not start out of the box. I contacted the agent who sent yet another 2 TPT. It worked well for almost 2 years and still works as far as I know. That said, it took a month and a half before receiving a working machine.

  I know everyone tries his best, but I find myself in the same situation I was in before - work to do, without a Tablet for work or idea when or if it will actually get repaired - forget the fact that I'm going to actually get a new repaired tablet.

  Please, if a support person sees this, give me a way to contact someone who can do something. I really want to like this product that I could finally enjoy the latest iteration of this tablet. I realize that I'm probably just bad luck, but, right now, if there was another Tablet Wacom 64 bit there, I wouldn't buy Lenovo. I won't be the case.

  Thank you for your time,

  JD Strohl

  Jdstrohl,

  Thank you for sharing your comments and I'm certainly interested by your system to understand why you've had these problems out of the box and why the support experience do not go as planned.

  Would you please send me a private message with your details, system type and serial number and a case of service if you have received one during your support call.

  We'll see what we can work.

  Thank you!

  Mark

• Audio, video and control issues game!

  I accidentally deleted the area of suppression of software/hardware sound wave for Audio and now I can not here anything, nor can I see games on Facebook.  Is it possible to reinstall it?  What I have to do.  I tried a system restore and update windows and I've also updated for service pack 3 hoping it would help, and it didn't.  Any help is greatly appreciated.  Thank you.

  Re-install your audio drivers.

  Go to the Web site of the manufacturer of your PC/laptop, then on the relevent to your download of machine support page, then install the audio driver files.

  See you soon,.

  Jerry

• Simple battery issue

  I recently bought a HP DV6-6170us and have a question about the battery. It's my first new computer in about 5 years.

  If I leave the power adapter connected to the battery is fully charged which will ruin the battery life? I know that on my old Dell Inspiron 9400 I would leave it plugged in all the time, and finally the battery disconnected life looked like 5 minutes. I got this computer in 2006, so I think that the batteries have changed since their.

  Hello

  It shouldn't affect your battery that much if you leave the laptop constantly plugged into the AC adapter - battery life is largely determined by the number of charge cycles and his age - you will not really clock cycles of charge if its permanently connected to a power supply.

  However if you really want to maximize your battery life, the best way would be to remove and store the battery drained to about 40% of a full charge and then wrap it in a plastic bag and store it somewhere cool like a fridge (not freezer).

  For more information on lithium-ion batteries, see link below.

  http://BatteryUniversity.com/learn/article/is_lithium_ion_the_ideal_battery

  Kind regards

  DP - K