Simple method for another server videos

Similar Questions

• UTL_FILE for another server, how

  Hello
  Anyway is it easy to write with utl_file Oracle MS file on another server? I rea on some Java applets for that but maybe there is something try that. I have no html, xls, xml, or whatever it is a txt file flat simply with a formatting, kind of report.
  
  I'm just learning that utl_file can write on the database server, not the client. In my case I have to create the file and send it as a result of customer and looks all DBAS don't like make files on the server of the Ora, this is common?
  
  All TX
  
  Trent

  Trento wrote:

  Anyway is it easy to write with utl_file Oracle MS file on another server?

  DBMS_FILE_TRANSFER for the Oracle server to the Oracle server copies files.

  Between an Oracle server and a non-Oracle server, there are two methods:
  -ftp
  sftp/scp
  -Samba (Windows network drive/CIFS mappimg)
  -NFS (network file share)
  -rdist (cable - sync'ing a directory of remote server to reflect a local)

  The "+ best +" one of them would be sftp/scp because it is one of the most secure interfaces. Rdist can be run using the scp.

  I'm just learning that utl_file can write on the database server, not the client.

  Fix. And that's the word limitation UTL_FILE . All the entries of file on any platform is possible only for local file handles. There is a way to write to a remote file not magically... Consider the standard appeal fopen() taken I/O supported by the majority of the nuclei.

  In my case I have to create the file and send it as a result of customer and looks all DBAS don't like make files on the server of the Ora, this is common?

  Stupidity of your DBA IMO.

  We stock a large number of text files (output of command line of devices containing configuration data), the CSV files and XML as CLOB files in Oracle. We generate also "files" as a CLOB in Oracle - using the database in the main storage for these 'files '. Delivery of these 'files' (stored as a CLOB) are usually via http (via WPG_DOCLOAD) or via ftp/sftp/scp (using custom PL/SQL packages).

• String error 42 - VI method for controls server Unflatten

  Try to use the VI-server method to save and retrieve values from control. Get a generic error 42 when using the name "minimum value" but the Vi works fine if you use a name "minimum values" conrol Vi clos can pass (using S1) between two control names to show that the error is in the difference in name. Is there a way to solve the problem or if another method to save and retrieve orders be used.

  Attached VI is in LV2010 sp1.

  Thanks for your help.

  One thing you can try is to disable the option "Convert EOL" functions to write to a file text and reading of text file.  As you save binary data as a string, you want to ensure that binary data is stored.  It may be better to use the binaries, instead of text files, because you are trying to save and load binary data.

  Chris M

• Simple player for VmWare server?

  Hello

  I'm under VmWare server 2.0 on my desktop Ubuntu, I often need to configure new virtual machines to test.

  My qyestion is: is there a quick way to run a VirtualMachine (for example the player) or I have every time to start the server? Can we install VmPlayer with VmServer?

  Thank you

  The Player and Server products fit together. However...

  On the Web console VI for the virtual machine, there is a command to create a shortcut on the desktop. When you double-click the shortcut and enter your credentials, it will open a console for this virtual machine. If the virtual machine does not work, it will be started. Or you can use the vmrun utility.

  Close the console doesn't stop the host, of course. If you want to stop it, you will need to use the web console to VI, the vmrun utility, or just simply the guest to close.

  Good luck!

• Add a video demo for another demonstration video

  I have recorded two demos video and would like to combine them into a single video demonstration. Is this possible in 8 Captivate?

  Hello

  Open them two change, then right-click on one of them and copy.

  In the second, then right-click and paste. Pouf! Video handset!

  See you soon... Rick

• What is the recommended method to configure a web proxy to another server on the LAN?

  Hello

  I use Server to manage incoming web traffic, but also have another server running I want to use outside.

  I work in directly modifying the site configuration file and adding the ProxyPass and ProxyPassReverse directives but these overwritten when the site configuration is changed in the.app

  I want to implement this in a way that is not crushed and is more robust.

  Any advice would be very welcome.

  Thank you

  Gary

  I'm certainly not an expert in the field, but I think you can do what you're asking using the functionality of the Web application.

  You bring a plist to webapps folder and a conf file in the apache folder and then using.app, edit your Web site, and then click Change advanced settings and select the Web application that you created. It should not then be written more if you make any changes.

  The content of the conf file would proxy information in it:

  # of http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#proxypass

  RewriteEngine on

  RewriteCond% {HTTPS} = off

  RewriteRule. -[E = Protocol: http, E = port: 8000]

  RewriteCond% {HTTPS} = we

  RewriteRule. -[E = Protocol: https, E = port: 8010]

  ProxyPassReverse / http://secondserver.example.com:8000 /

  ProxyPass / http://secondserver.example.com:8000 /

  and the plist would be something like this:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  <!-see the manual pages for webapp.plist (5) and webappctl (8) for more information on this example webapp.plist->

  < plist version = "1.0" >

  < dict >

  includeFiles < key > < / key >

  < table > <! - include files are enabled in the virtual host then webapp - >

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string > <! - name must match your conf file - >

  < / array >

  < key > name < / key >

  < string > com.example.secondserverwebapp < / string >

  displayName < key > < / key > <! - name displayed in app server - >

  < string > SecondServerWebApp < / string >

  installationIndicatorFilePath < key > < / key > <!-the presence of this file indicates web app is installed->

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string >

  sslPolicy < key > < / key > <! - determines the behavior of the webapp SSL - >

  < number > 0 Integer < / integer > <!--0: by default, UseSSLWhenEnabled->

  <!--1: UseSSLAlways->

  <!--2: UseSSLOnlyWhenCertificateIsTrustable->

  <!--3: UseSSLNever->

  <!--4: UseSSLAndNonSSL->

  < / dict >

  < / plist >

  This is perhaps not completely right, but can direct you in the right direction, I hope that someone with more knowledge will be the chip in the meantime

• wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter.

  Hi all

  I have a data file where there is a wcm:element like below

  < wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>

  So, I get an exception to content server

  
  

  Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]

  An error has occurred. The stack trace below shows more information.

  !csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.

  intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage

  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

  at intradoc.server.Service.buildServiceException(Service.java:2271)

  at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)

  at intradoc.server.Service.createServiceException(Service.java:2260)

  at intradoc.server.Service.buildResponsePage(Service.java:1314)

  at intradoc.server.Service.doResponse(Service.java:2076)

  at intradoc.server.FileService.doResponse(FileService.java:1469)

  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)

  at intradoc.server.Service.doRequest(Service.java:1890)

  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)

  at intradoc.server.Service.buildResponsePage(Service.java:1267)

  ... more than 10

  Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLNoStack! $

  !csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$

  -& #62;      & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;

  in sitestudio. SSClassHelper.invoke (unknown Source)

  in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)

  in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)

  in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  ... more than 17

  Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)

  at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  in sitestudio. SSClassHelper.invokeRaw (unknown Source)

  ... 23 more

  Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$

  ! csDynHTMLServerScriptEvalError

  in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.

  Concerning

  I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).

  At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).

  If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?

  Jonathan

  https://jonathanhult.com

• For 'Post online', these files can be exported to another server?

  Hello

  I'm about to create a newsletter for a client (print version), and they want an online version. The feature to publish online looks great and works great, but my client wants to host the files on their server and not only on the Adobe server. Y at - it an option to publish the files to another server? The only alternative I could think was "Save as web page complete" on the web page so that all the files/folders should be saved in a folder, but that did not work.

  I need to let my client know immediately what the options are so I hope someone can answer this as soon as possible. This question has probably been asked before, but I couldn't find the answer. The "Export as html" option since InDesign is not the answer, but publish it online works fine, just can't find out how to get these files to another server. Thank you!

  Right now you can have documents published online on Adobe servers.

  The documents cannot be protected, which may not be important for a society newsletter.

  They can be viewed by any browser on any device and can include InDesign interactivity

  The link of the URL can be sent to readers, you can share via share (FaceBook, Twitter, Email) and embed the code on a Web site. You also have the ability to allow the user to download a PDF version.

• The creation of Oracle 11 g DSN for database on another server

  Hello

  How to create a database of Oracle 11 g DSN for a database that is lying on another server? I tried to use the Microsoft ODBC Administrator tool, but it gives me options only for databases on my own machine.

  Hello

  Check this thread can help you https://forums.oracle.com/thread/2479208

• cloning/copying an old r11 environment to another server (Windows)

  Hi all
  We are runing 11.0.3 (multi-level) under windows.
  
  DB, simultaneous Manager, the report server on a server
  Forms Apache Server, WEB, on another node.
  
  We are facing some curruption of disc and a few hardware problems. So I need to clone my system to the other server.
  Can someone help me to clone R11 to another server on the windows machine.
  
  concerning
  Musaddaq

  Here's 11.0.3 cloning process
  =====================

  Helios, he seeks 11.0.3 version cloning, correct me if I'm wrong any of the steps, I use the same procedure for one of our 11.0.3 instance EBS.

  I am pasting the note here, then you can try to clone:

  There is an internal memo to make a clone on the 11.0.x, release but it is not supported. Please make sure that you have a good backup.

  ==============================================================================================================================================================
  ===================
  Note 91985.1 Step by step on cloning the ORACLE_HOME (including DB) and APPL_TOP:
  =================================================================================
  Cloning an instance of Oracle Application version 11 on a separate UNIX Machine
  ==============================================================================

  Goal
  ---------

  Provide a method of cloning an Oracle Applications version 11 APPL_TOP,.
  an ORACLE_HOME 8.0.X and database files included.

  Scope of Application &
  -------------------

  It takes a high level of experience with Applications for this document.

  Related documents
  -----------------

  Oracle Applications version 11 for UNIX manual of Installation (part No. A57983-02)

  Assumptions
  -----------

  You have already installed Oracle Applications version 11 and a 8.0.X
  ORACLE_HOME/database and all works fine.

  If you clone the APPL_TOP and ORACLE_HOME of quite another
  UNIX box, you must make sure that the target operating system is the
  same and is patched up to the same level as the source area, you are
  cloning of.

  Measures for Clone
  --------------

  1. on the target area, create a user and the user who owns the APPL_TOP who
  has the ORACLE_HOME files and database files (will be applmgr and)
  Oracle, respectively for the purposes of this document). Create an environment
  file for each of these users by specifying environment variables
  referenced in the Oracle version 11 for the Installation of UNIX Applications
  Manual.

  Example of variables for the oracle user:

  LD_LIBRARY_PATH
  ORACLE_HOME
  ORACLE_SID
  TWO_TASK (if applicable)
  PATH
  TERM
  JRE_DIR

  Example of variables for user applmgr:

  APPL_TOP
  LD_LIBRARY_PATH
  NLS_DATE_FORMAT
  NLS_LANG
  NLS_NUMERIC_CHARACTERS
  ORACLE_HOME
  PATH
  ORACLE_SID
  TWO_TASK (if applicable)
  TERM

  Note: Many of the following steps are since the white paper of the bridges D.
  'Copy of a database'. A copy of this is located at the end of this document.

  2 plug the sources such as the oracle user machine and the newspaper is
  svrmgrl or SQL * more as SYSDBA and SYSOPER DBA role he conceded.
  Run the following command:

  SQL > ALTER DATABASE BACKUP CONTROLFILE TO TRACE;

  The trace will be found at the the USER_DUMP_DEST value which is
  defined in the init.ora file. (An example of this trace file is located
  d. bridges of paper at the end of this article.)

  3. make a list of all data files and redo log files:

  SQL > SELECT file_name FROM dba_data_files;
  SQL > SELECT Member FROM v$ logfile;

  4. stop your database cleanly. Run each to do the following:

  SQL > shutdown normal;
  SQL > shutdown immediate;
  SQL > shutdown transactional;

  5 A this point, anything that creates a process of operating system must
  be lowered neatly on the Source area. Examples are: Forms Server
  Process, process of Web server, concurrent managers and the database listener.

  6. make zip files of all APPL_TOP, ORACLE_HOME files and database files
  files (datafiles and redo logs) on the Source area.

  7 FTP files zipped above the target area. Also ftp on the trace file
  that was created in step 2 above, you will be using it again in step 8.

  8. unzip all the files in the new $APPL_TOP, $ORACLE_HOME locations.

  You are now finished with the source area. Every process can safely be made
  Save this box. The rest of the book refers to the target area.

  9. changing theinit .ora file on the target area (usually located in the)
  Directory$ ORACLE_HOME/dbs) to reflect the structure of your new directory.
  (D. bridges paper below gives examples of what should generally be)
  changed in the environment).

  10 change the track of file that you created in step 2 to take account of your new directory
  structure.

  11 start server manager (svrmgrl) and run the trace of the file against your
  database.

  Example: svrmgrl (internal connect)
  Svrmgrl > @tracefile.trc

  12 edit listener.ora and tnsnames.ora files to reflect your new
  environment. These files must be in the $ORACLE_HOME/network/admin
  Directory.

  13 put in place the process of listening and trying to connect to SQL * more to test
  connectivity to the database. Make sure the applmgr and oracle
  environment of the users can connect to SQL * more.

  14 create a link to the technology stack in the ORACLE_HOME. Example of elements to
  be related:

  CD $ORACLE_HOME/procbuilder/lib; f ins_procbuilderv8.mk install
  CD $ORACLE_HOME/browser20/lib; f ins_browser20v8.mk install
  CD $ORACLE_HOME/forms45/lib; f ins_forms45wv88.mk install
  CD $ORACLE_HOME/rdbms/lib; f ins_rdbms.mk install

  15. There are several configuration files that need to be changed so that
  the Web server in order to work on the new box. The recommended method for
  change the host name in the configuration files is to uninstall, then
  Reinstall the Web server using the oracle Installer.

  16. Enter the area of the target as the applmgr and run adadmin. Choose from the
  Option "reissue Applications programs. If you have changed the directory
  structure for your APPL_TOP on the target from the Source area, you
  will also have to choose recreate your environment file.

  This is a good place to open a SQL * Plus the term and log in as the APPS
  user. Once you connect to SQL * more run the following query as a system of
  Search for invalid objects in the database:

  SQL > select owner, object_type, object_name in dba_objects
  When status = 'INVALID';

  If all objects are returned that belong to the user apps need to recompile the
  APPS schema in adadmin.

  17 follow chapter 4 of the manual version 11 install and configure the
  webserver.

  18 start concurrent managers. The name of the node in the-> simultaneous
  Manager-> administer form should take the new machine dynamically
  target name of the area.

  If the competitor-> Manager-> form to administer the node name is
  No poster, at the prompt, type UNIX:

  uname - a (this will return the machine think his name)

  The UNIX administrator at this stage you will need to reconfigure
  the target area to register the correct node for this box.

  19. you must now change the profile options that could have been
  affected by cloning. Examples: RRA:URL, WEB_AGENT, and
  HELP_SYSTEM_BASE_URL.

  20 start your forms and Server Web server process after sourcing (running)
  your new file of environment under the directory $APPL_TOP.

  21 change the static html page or set up your dynamic cartridge and
  to connect to your applications on the target area.

  Copy of a database
  ==================
  By Dave Bridges

  Move a database from one location to another is conceptually very simple.
  However, you must be extremely careful or the migration fails. There are
  two basic ways - a logical and a physical examination - to move a database.

  The logical method is to create a new empty database in the new location
  (target database), perform a complete export of the original database (source
  (database), and then import the source database in the target database.
  This article assumes that you have decided not to use this approach. For more information
  on export and import, please see the Oracle Server Utilities
  Guide for your particular server.

  The physical approach involves the cloning of the source database. This method is
  very similar to a backup of the database offline. The steps are:

  1 back up the source database control file in a trace file.
  2. a list of all your data and redo log files.
  3. perform a "clean" source database shutdown.
  4. copy all the files of database redo log files, file init.ora and trace file
  (from step 1) the location of the source to the target location.
  5. change the file init.ora target and the trace file.
  6. start the target instance.
  7. re-create the control file, retrieve and open the database.

  Each of these steps is explained in the following instructions.

  Note: The following instructions assume (1) you already have the server
  installed in the location of the target, (2) all parameters are already set
  environmental target and (3) If you use NT, you must
  already created and started the services necessary for the target
  database.

  1 back up the source database control file in a trace file. To connect to
  the source via open or SQL database * more using an account that has the
  SYSDBA and SYSOPER DBA role he conceded. Run the following command:

  SQL > ALTER DATABASE BACKUP CONTROLFILE TO TRACE;

  This will create a text file that we will use later. This file will be
  written in the subdirectory named by the value of the USER_DUMP_DEST
  parameter.

  2. a list of all data files and redo log files. It is absolutely
  essential to know about the names and locations of all the files of data and redo
  the log files. To do this, run the following queries:

  SQL > SELECT file_name FROM dba_data_files;

  SQL > SELECT Member FROM v$ logfile;

  The first query will give the path and name for each of your
  data files. The second query will give the same information to redo all the
  the log files. Be sure to save this information for future reference.

  3. perform a "clean" source database shutdown. A clean shutdown is
  are necessary to ensure that all data files and control files
  synchronized with the latest transactions. What follows
  commands give you a clean shutdown:

  normal stop;
  stop immediately;
  Shutdown transactional;

  Note: The shutdown transactional is not available in Oracle7.

  4. copy all the files of database redo logs trace and the init.ora file
  target file to the location of the source to the location. With the help of the
  information collected in step 2, copy all the data source and redo log files
  files to the target location. Also copy the file init.ora and the
  trace file generated in step 1 to the location target.

  5. change the target init.ora file, and the trace file. Using a text editor
  revise the init.ora file to reflect the new values for the target
  database. It will be change the paths indicated in the settings
  as CONTROL_FILES USER_DUMP_DEST, BACKGROUND_DUMP_DEST and all
  another parameter that specifies a path/file location (see annex 1
  below). Similarly, we must change the trace file. This file contains
  the CREATE CONTROLFILE command we will use in step 7. You
  will have to change the paths for all data files and redo log files
  to reflect their new location (see attachment 2 below).

  6. start the target instance. Once the init.ora file is changed, you can
  Start the instance. However, since we do not have control files.
  You must use the following command:

  startup nomount;

  7. re-create the control file. Once the instance is started, you can create
  your control files. If you saved your file of track under mytrace.trc, you can
  now create the command files by running this file as follows:

  @mytrace.trc

  This script will create the control files, perform a database recovery
  to resynchronize the control file with the rest of the database, and
  Open the database.

  Now, your target database must be open and consistent. There may always be
  some remaining tasks you need to perform, such as the creation of a password for the new file
  database or create/update a listener on the node target. These tasks are
  beyond the scope of this discussion.

  Attachment 1. Example of init.ora file
  -----------------------------------

  Here is an example of the init.ora file.

  Are entries that need to be changed to reflect the location of the target file
  identified by a '<-- edit="" this'="">

  init.ora

  AQ_TM_PROCESSES = 1
  background_dump_dest = G:\orant\rdbms80\trace<-- edit="">
  compatible = 8.0.5.0.0
  control_files = ("G:\orant\database\ctl1home.ora",<-- edit="">
  "G:\orant\database\ctl2home.ora")<-- edit="">
  db_block_buffers = 200
  DB_BLOCK_SIZE = 2048
  db_file_multiblock_read_count = 8
  DB_FILES = 1020
  db_name = home
  dml_locks = 100
  log_buffer = 8192
  log_checkpoint_interval = 8000
  log_checkpoint_timeout = 0
  max_dump_file_size = 10240
  process = 50
  Remote_login_passwordfile = exclusive lock
  SEQUENCE_CACHE_ENTRIES = 10
  sequence_cache_hash_buckets = 10
  shared_pool_size = 6500000
  sort_area_size = 65536
  user_dump_dest = G:\orant\rdbms80\trace<-- edit="">

  Attachment 2. Example of trace file
  --------------------------------

  Here is a sample of the output of the command alter database backup
  controlfile to trace.

  Are entries that need to be changed to reflect the location of the target file
  identified by a '<-- edit="" this'="" entry.="" edit="" this'="">

  Clone.TRC

  1999.10.08.10.49.07.171
  # The following commands will create a new control file and use
  # to open the database.
  # Data used by the Recovery Manager will be lost. Additional logs may
  # be required for the media recovery of offline data files. Use this
  # only if the current version of all newspapers online is available.
  STARTUP NOMOUNT
  CREATE NORESETLOGS NOARCHIVELOG CONTROLFILE REUSE DATABASE "HOME".
  MAXLOGFILES 32
  MAXLOGMEMBERS 2
  MAXDATAFILES 30
  MAXINSTANCES 1
  MAXLOGHISTORY 112
  LOGFILE
  GROUP 1 ' G:\ORANT\DATABASE\LOGHOME1. ORA' SIZE 1 M.<-- edit="">
  GROUP 2 ' G:\ORANT\DATABASE\LOGHOME2. ORA' SIZE 1 M<-- edit="">
  DATA FILE
  ' G:\ORANT\DATABASE\HOMESYS. DBF',.<-- edit="">
  ' G:\ORANT\DATABASE\HOMERBS. DBF',.<-- edit="">
  ' G:\ORANT\DATABASE\HOMEUSER. DBF',.<-- edit="">
  ' G:\ORANT\DATABASE\HOMETEMP. DBF',.<-- edit="">
  ' G:\ORANT\DATABASE\HOMEINDX. DBF'<-- edit="">
  ;
  # Recovery is required if any of the data files are restored backups.
  # or if the last stop was not normal or immediate.
  RECOVER THE DATABASE
  # Database can now be opened normally.
  ALTER DATABASE OPEN;
  ================================= ================================================================================
  ================================================================

  If you need assistance with the cloning of your instance, you will need to contact Oracle Con
  relativeme.

  Edited by: 3Amigos December 13, 2010 01:39

• Binds the exportXFAData(); method for the saveAs event

  I have an XFA form that was built with LiveCycle and I try to write javascript to Adobe who will export the form data to an XML file whenever a user manually saves the file in Acrobat. Preferably, this feature is easily sharable, because I have clients who need to have this ability.

  I'm a novice, but it seems that the interactive objects are grey and so I can not add a custom button. That's why I hope to link the exportXFAData(); method for the saveAs event. When a user does CTRL + S or file > save (sub)... the XML should be exported to the desktop.

  It seems that I have to use the exportXFAData() or exportAsXFDF() method.  I found something that says: " it is a very simple process to do this, use the method saveAs Doc object... " and copy the following code:

  
  

  this.saveAs ("/ c/temp/test.xml", "com.adobe.acrobat.xml - 1-00");

  I do not know where to write this code, or if it must be adapted (not to mention that the path) to accomplish what I asked above.

  Thank you very much,

  
  

  
  

  Carl

  
  

  It does not export form data, as far as I know, but another schema. There is a different method for acroforms export but I don't know for XFA forms. You should check the reference XFA JavaScript, not google.

  The example you found is not in any way binding to the SaveAs event. Rather, it uses a special feature of the document.saveAs method that allows you to save/export other formats instead of PDF, such as file options > save as. The code generally added to a button, but do not work (see below). I don't know if you can run this in an event WillSave or similar, that; s a separate exercise.

  Don't forget to read the XFA JavaScript document for this method since it will have security restrictions designed to stop incorporating any kind of back up/export to a file - because think havoc if a PDF file that you have downloaded begins to silently save/export the files to your computer. Do not try to use acroform rather documentation! And I see that what you quoted DC Acrobat SDK Documentation applies to the acroforms.

  For more specific help, I suggest the LiveCycle Designer forum. We are dealing here Acroforms.

• Configuration of SQL 2008 R2, Enterprise Edition for vCenter Server 5.1

  Greetings to all seasons.

  Kind of a newbie here. That's my lab environment.

  I have always used the vCenter Server install Simple option that also installs the shipped Microsoft SQL 2008 R2 Express edition.

  Now, I do an eval of vSphere 5.1 and I want to manually configure a database server using the Microsoft SQL 2008 R2 Enterprise Edition.

  I know how to install the database server and it works. But I do not know how exactly set up a database for vCenter Server.

  I looked at the guide Configuration / Installation of vSphere and I don't seem to be able to follow the preparation vCenter Server databases section, because I'm not a person to the database. Y at - it any other guide or a blog, I can follow? I searched a lot and found everything I was looking for. Thought I would ask here.

  Here are the virtual machines I have.

  Lab - DC1 (domain controller)

  Lab - DC2 (domain controller)

  Lab-SQL1 (SQL 2008 R2, Enterprise Edition)

  Lab-SQL2 (SQL 2008 R2 Enterprise - subsequently configure failover clustering)

  Lab-VC1(vCenter Server 1)

  Any help is appreciated!

  Happy holidays.  Here is a link to another site with a nice installation guide for SQL 2008 for VMware.  Version 4.x, published in lonesysadmin.net was very helpful, so I'm sure that the 5.x update (have not read through it again) must be all too packed with useful tips.

  http://lonesysadmin.NET/2011/10/06/how-to-install-Microsoft-SQL-Server-2008-R2-for-VMware-vCenter-5/

• Vcenter replacement with another server?

  Hi, I have a client who has there VCenter server as a physical box on windows xp.  The box was funny for a while acting, needs to be restarted often.

  There are only 3 hosts ESXi with HA installation, nothing really more than that.

  So I was planning just on VCenter running on a virtual machine with windows server 2003.  I don't want to convert the physical area more because he has all these problems, so I want to do a new installation.

  I was hoping I could just install a fresh VM on VCenter, then simply add the ESXi hosts for it.  Is it as simple as that.

  I don't to lose performance data.  HA is easy to configure again.

  So what happens when I try to add an ESXi host that already belongs to another server Vcenter?  Im hoping it let me know and just made me add a new and Rob configurations such as the old HA off the server information.  Is that what happens?

  Hoepfully that makes sense.

  Thank you

  Mike

  Mike,

  First of all, Remove your old VC ESXi server. If you don't like that, this box is of course out of cluster. So adding the same server ESXi in another VC and configuration HA & DRS is not warn and do not threaten you.

  The above suggestion is reserved when you don't care HA configurations and performance data.

  Happy installing!

  Thank you

  Ganesh

• GUI for OEL6 Server Blade

  Hello
  
  I installed OEL6 on VM to the blade server. We use Citrix for virtualization. Problem is that since the installation is done on the server without any VGA monitor card attached so Linux got installed without GUI. Now I need to install the Oracle database on this virtual machine. I believe that X-Window is necessary at least. I installed X Windows System and the Gnome desktop environment. Now when I run gdmsetup it does not work. I installed tigervnc on the server and updated the iptables for also made of changes in the gdm configuration file, but when I try to connect from my computer Windows XP using Tightvncviewer error, it throws firewall rules. "Unable to RRs data socket. My windows Firewall is disabled. I disabled the firewall and SELinux on the server, but that did not help either.
  
  I just need to be able to access the linux VM since my machine windows in graphical mode. I, therefore, ask you to help me set up.
  
  Note: The startx command server throws this error.
  

  Build Date: 07 March 2012  04:10:46PM
  Build ID: xorg-x11-server 1.10.4-6.el6_2.3 
  Current version of pixman: 0.18.4
  Before reporting problems, check https://www.redhat.com/apps/support/
  to make sure that you have the latest version.
  Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  1 23:42:07 2012
  (==) Using default built-in configuration (21 lines)
  (EE) open /dev/fb0: No such device
  (EE) No devices detected.
  
  Fatal server error:
  no screens found
  
  Please consult the Red Hat, Inc. support 
   at https://www.redhat.com/apps/support/
   for help. 
  Please also check the log file at "/var/log/Xorg.0.log" for additional information.
  
  giving up.
  xinit:  No such file or directory (errno 2):  unable to connect to X server
  xinit:  No such process (errno 3):  Server error.

  Xorg.0.log file contains the following information
  

  [ 33282.906]
  X.Org X Server 1.10.4
  Release Date: 2011-08-19
  [ 33282.906] X Protocol Version 11, Revision 0
  [ 33282.907] Build Operating System: ca-build44 2.6.31.5-127.fc12.x86_64
  [ 33282.907] Current Operating System: Linux aud-devdbs-01.adcci.gov.ae 2.6.32-220.el6.x86_64 #1 SMP Wed Dec 7 10:41:06 EST 2011 x86_64
  [ 33282.907] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD console=hvc0  KEYTABLE=us rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=129M@0M quiet rd_LVM_LV=VolGroup/lv_root rd_NO_DM  graphical utf8
  [ 33282.907] Build Date: 07 March 2012  04:10:46PM
  [ 33282.907] Build ID: xorg-x11-server 1.10.4-6.el6_2.3
  [ 33282.907] Current version of pixman: 0.18.4
  [ 33282.907]    Before reporting problems, check https://www.redhat.com/apps/support/
   to make sure that you have the latest version.
  [ 33282.907] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  [ 33282.908] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  1 23:42:07 2012
  [ 33282.908] (II) Loader magic: 0x7d6d20
  "Xorg.0.log" 146L, 7594C
  [ 33282.908] (II) Loader magic: 0x7d6d20
  [ 33282.908] (II) Module ABI versions:
  [ 33282.908]    X.Org ANSI C Emulation: 0.4
  [ 33282.908]    X.Org Video Driver: 10.0
  [ 33282.908]    X.Org XInput driver : 12.2
  [ 33282.908]    X.Org Server Extension : 5.0
  [ 33282.909] (==) Using default built-in configuration (21 lines)
  [ 33282.909] (==) --- Start of built-in configuration ---
  [ 33282.909]    Section "Device"
  [ 33282.909] Identifier      "Builtin Default vesa Device 0"
  [ 33282.909] Driver  "vesa"
  [ 33282.909]    EndSection
  [ 33282.909]    Section "Screen"
  [ 33282.909] Identifier      "Builtin Default vesa Screen 0"
  [ 33282.909] Device  "Builtin Default vesa Device 0"
  [ 33282.909]    EndSection
  [ 33282.909]    Section "Device"
  [ 33282.909] Identifier      "Builtin Default fbdev Device 0"
  [ 33282.909] Driver  "fbdev"
  [ 33282.909]    EndSection
  [ 33282.909]    Section "Screen"
  [ 33282.909] Identifier      "Builtin Default fbdev Screen 0"
  [ 33282.909] Device  "Builtin Default fbdev Device 0"
  [ 33282.909] Device  "Builtin Default fbdev Device 0"
  [ 33282.909]    EndSection
  [ 33282.909]    Section "ServerLayout"
  [ 33282.909] Identifier      "Builtin Default Layout"
  [ 33282.910] Screen  "Builtin Default vesa Screen 0"
  [ 33282.910] Screen  "Builtin Default fbdev Screen 0"
  [ 33282.910]    EndSection
  [ 33282.910] (==) --- End of built-in configuration ---
  [ 33282.910] (==) ServerLayout "Builtin Default Layout"
  [ 33282.910] (**) |-->Screen "Builtin Default vesa Screen 0" (0)
  [ 33282.910] (**) |   |-->Monitor "<default monitor>"
  [ 33282.910] (**) |   |-->Device "Builtin Default vesa Device 0"
  [ 33282.910] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
   Using a default monitor configuration.
  [ 33282.911] (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
  [ 33282.911] (**) |   |-->Monitor "<default monitor>"
  [ 33282.911] (**) |   |-->Device "Builtin Default fbdev Device 0"
  [ 33282.911] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
   Using a default monitor configuration.
  [ 33282.911] (==) Automatically adding devices
  [ 33282.911] (==) Automatically enabling devices
  [ 33282.911] (==) FontPath set to:
   catalogue:/etc/X11/fontpath.d,
   built-ins
  [ 33282.911] (==) ModulePath set to "/usr/lib64/xorg/modules"
  [ 33282.911] (II) The server relies on HAL to provide the list of input devices.
   If no devices become available, reconfigure HAL or disable AutoAddDevices.
  [ 33282.911] (II) LoadModule: "extmod"
  [ 33282.912] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
  [ 33282.914] (II) Module extmod: vendor="X.Org Foundation"
  [ 33282.914]    compiled for 1.10.4, module version = 1.0.0
  [ 33282.914]    Module class: X.Org Server Extension
  [ 33282.914]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.914] (II) Loading extension SELinux
  [ 33282.914] (II) Loading extension MIT-SCREEN-SAVER
  [ 33282.914] (II) Loading extension XFree86-VidModeExtension
  [ 33282.914] (II) Loading extension XFree86-DGA
  [ 33282.914] (II) Loading extension DPMS
  [ 33282.914] (II) Loading extension XVideo
  [ 33282.914] (II) Loading extension XVideo-MotionCompensation
  [ 33282.914] (II) Loading extension X-Resource
  [ 33282.914] (II) LoadModule: "dbe"
  [ 33282.915] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
  [ 33282.915] (II) Module dbe: vendor="X.Org Foundation"
  [ 33282.915]    compiled for 1.10.4, module version = 1.0.0
  [ 33282.915]    Module class: X.Org Server Extension
  [ 33282.915]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.915] (II) Loading extension DOUBLE-BUFFER
  [ 33282.915] (II) LoadModule: "glx"
  [ 33282.915] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
  [ 33282.916] (II) Module glx: vendor="X.Org Foundation"
  [ 33282.916]    compiled for 1.10.4, module version = 1.0.0
  [ 33282.916]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.916] (==) AIGLX enabled
  [ 33282.916] (II) Loading extension GLX
  [ 33282.916] (II) LoadModule: "record"
  [ 33282.917] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
  [ 33282.917] (II) Module record: vendor="X.Org Foundation"
  [ 33282.917]    compiled for 1.10.4, module version = 1.13.0
  [ 33282.917]    Module class: X.Org Server Extension
  [ 33282.917]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.917] (II) Loading extension RECORD
  [ 33282.917] (II) LoadModule: "dri"
  [ 33282.918] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
  [ 33282.918] (II) Module dri: vendor="X.Org Foundation"
  [ 33282.919]    compiled for 1.10.4, module version = 1.0.0
  [ 33282.919]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.919] (II) Loading extension XFree86-DRI
  [ 33282.919] (II) LoadModule: "dri2"
  [ 33282.919] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
  [ 33282.919] (II) Module dri2: vendor="X.Org Foundation"
  [ 33282.919]    compiled for 1.10.4, module version = 1.2.0
  [ 33282.919]    ABI class: X.Org Server Extension, version 5.0
  [ 33282.920] (II) Loading extension DRI2
  [ 33282.920] (II) LoadModule: "vesa"
  [ 33282.920] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
  [ 33282.921] (II) Module vesa: vendor="X.Org Foundation"
  [ 33282.921]    compiled for 1.10.4, module version = 2.3.0
  [ 33282.921]    Module class: X.Org Video Driver
  [ 33282.921]    ABI class: X.Org Video Driver, version 10.0
  [ 33282.921] (II) LoadModule: "fbdev"
  [ 33282.922] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
  [ 33282.922] (II) Module fbdev: vendor="X.Org Foundation"
  [ 33282.922]    compiled for 1.10.4, module version = 0.4.2
  [ 33282.922]    ABI class: X.Org Video Driver, version 10.0
  [ 33282.922] (II) VESA: driver for VESA chipsets: vesa
  [ 33282.922] (II) FBDEV: driver for framebuffer: fbdev
  [ 33282.922] (--) using VT number 7
  
  [ 33282.923] (WW) Falling back to old probe method for vesa
  [ 33282.923] (WW) Falling back to old probe method for fbdev
  [ 33282.923] (II) Loading sub module "fbdevhw"
  [ 33282.924] (II) LoadModule: "fbdevhw"
  [ 33282.925] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
  [ 33282.925] (II) Module fbdevhw: vendor="X.Org Foundation"
  [ 33282.925]    compiled for 1.10.4, module version = 0.0.2
  [ 33282.925]    ABI class: X.Org Video Driver, version 10.0
  [ 33282.932] (EE) open /dev/fb0: No such device
  [ 33282.932] (EE) No devices detected.
  [ 33282.932]
  Fatal server error:
  [ 33282.932] no screens found
  [ 33282.932]
  Please consult the Red Hat, Inc. support
   at https://www.redhat.com/apps/support/
   for help.
  [ 33282.932] Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  I'm sorry if you find my silly post since I'm new to Linux and still learning.
  
  Published by: 938187 on June 1, 2012 12:49
  
  Published by: 938187 on June 1, 2012 12:56

  Maybe you try more. What happens if you use ' xclock - norender "?

• Access to multimedia files from another server problem

  Currently I am working in a project with streaming video on-demand and using FMS 4.5 .

  
  

  " Say the FMS is installed on a machine say ' 121.123.35.34 ' and there is another server"100.54.88.222". where all media files belong Now we need point to this third-party server to play videos of FMS. I did the changes below:

  In the fms.ini file: set VOD_DIR2 = \\100.54.88.222\myvideos

  In the application.xml: added stream: streams >/HR; ${VOD_DIR2} < / flow >

  My request for access to the path of the flv as: source = "rtmp: / / 121.123.35.34:1935/vod/hr/test. Not able to access the video.

  
  

  Note: If I say "C:hrvideos" in VOD_DIR2, then I'm able to access videos using the same URL.

  
  

  I also tried mapping the path shared the machine to the FMS and then saw the drive mapped path in the VOD_DIR2, but it does not work.

  Please let me know:
  

  1. If we set up any other parameter videos from another server.
  2. VOD_COMMON_DIR: I modified this similar to VOD_DIR in the directory "C:hrvideos", I am able to stream videos with http, rtmp, but not the jet of abl eto.

  Please let me know we can disseminate via http too as we need to run the f4m manifest file.

  http://121.123.35.34:8134/vod/hr/sample.mp4.

  http://121.123.35.34:8134/vod/hr/sample. F4M
  

  
  

  Thank you

  Anjali

  Hello

  For RTMP: Try mapping to another server.

  For HTTP: Yesy you can change the DocumentRoot directive, but then it will search for content in this folder for all types of applications and not just HDS VOD.

  To configure only HDS - VOD, positioned on the HttpStreamingContentPath:

  Change this HttpStreamingContentPath '... / webroot/vod " to HttpStreamingContentPath" C:/hrvideos "

  Note that the location is now absolute and oblique. Likewise, you can put in a network address.

  Thank you