simple problem

Similar Questions

• Tri - very simple problem, but I can't get it

  Hi, I have a little problem with a sort column.
  I think it's for you, a very simple problem, but for the moment, I can't find the solution.
  
  My topic:
  SCHLUESSEL
  -----------------
  15
  16
  17
  1501
  1502
  150101
  150103
  150202
  15010100
  15010301
  15020215
  ...
  
  Correct order is:
  
  15
  1501
  150101
  15010100
  
  150103
  15010301
  
  1502
  150202
  15020215
  
  16
  17

  have you tried

  order by to_char(SCHLUESSEL)
  

  Ravi Kumar

• Windows 7 on simple problem installing Tecra A7

  Hello!

  I have a big problem with my installation of Windows 7. The story is the following:
  -bought a new (250GB) HD and Windows 7 Progessional
  -replaced existing Tecra A7 HD new HD (120 GB)
  -Installed Windows 7 Professional 32 bit simple hard disk

  So far so good, everything works.

  Now, I wanted to install the drivers released by Toshiba Tecra A7 for Windows 7 (32 bit)
  -Everything works, without the back driver and audio driver. Whenever I start the installation executable program leaves without saying any error message.
  -J' have therefore no display driver on my system now and not in the 1280 x 800 resolution support - which is very ugly
  -I have no audio Realtek driver on the system (but works its basic system)

  What can I do? Help, please!

  I've found a workaround
  Here: http://www.sevenforums.com/drivers/7838-ati-mobility-x1400-build-7100-x64.html you will find drivers for X 1400 (also see X 1600) for Win7 32 and 64 bit

• Never over charge when downloaded, xml, very simple problem Gallery

  Hi all

  I'm havin a very stupid problem atm, I made this slide show very simple wich loads images via an XML file. Everything works very well locally, load slideshow images nice blablabla. But problems when I load up my server, once it is downloaded and I try t o play I get this error:

  [QUOTE] Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2036: finished loading never. [/ QUOTE]

  It has something to do with the .xml file that I load here as:

  var request_xml:URLRequest=new URLRequest("setup.xml");
  

  I tried to replace it with ("http://www.semagames.be/.../setup.xml" ' "), but then I got a sandbox violation error that is not solvable, unless you get signed (I read that somewhere).

  The way I load the images in XML format:

  <SLIDE_SHOW>
    <PICTURE>ImagesBw/Foto1.JPG</PICTURE>
    ...
  </SLIDE_SHOW>
  

  The file, a great pain in the * ss, can be found here: http://semagames.be/testplaats/kutbucht/BG.swf

  Anyone who can help me out here? would be greatly appreciated.

  your images are tiny extension.  Attach your xml file.

• Simple problem: ActionScript Code for & quot; Permutation of & quot; a SWF file?

  Easy problem, I think. I'm doing a site simple, purely based on Flash. Is it all the same to us will tell onClick change the .swf and load another without busting on a different page?
  
  For example, when you visit www.mydomain.com/index.html, you see home.swf. Then, in the toolbar in the .swf, you click a "Download" button, replace home.swf by downloads.swf, it allows you to stay on index.html.
  
  I guess it would be simple, but Google shows up zilch.

  {We (Release)}
  loadMovie ("movie.swf");
  }

• A simple problem that someone can surely solve

  I'm doing something really simple and its does not work :)
  The following works:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" xmlns:local = "*".
  applicationComplete = "startup (event)" >
  < mx:Script >
  <! [CDATA]
  Import fl.controls.Label;
  import com.greyhound.flashrealms.account.AccountPanel;
  import com.greyhound.flashrealms.FlashContainer;
  Import mx.events.FlexEvent;
  private void startup(e:FlexEvent):void
  {
  var: label = new Sun;
  
  Label.Text = "test";
  Application.application.stage.addChild (label);
  }
  []] >
  < / mx:Script >
  
  < / mx:Application >
  
  But if I change to mx.controls.Label fl.controls.Label I don't see anything on the screen.
  Does anyone know whats going on?
  

  Try using this.addChild (label); rather than add to the scene. I'm not a person of flash, but it sounds like a problem of compatibility of data type? Not sure, but try and see if it adds and then work it from there.

• This computer does not have a wirelless... not a simple problem switch wireless

  Hello, im having a LOT of trouble with my internet. Basically I messed up uo my computer so I had to reinstall vista from disk. All right, but MY INTERNET won't WORK.

  I click on diagnose the problem when he says that it cannot connect, then I get "this computer has an installed and configured wireless network adapter". It has an option for me to install the correct hardware and drivers, but I have NO IDEA of what to install. In addition, the problem is not simply a switch wireless off, I have a desktop computer.
  I thought that I had to install the driver for my verizon fios actiontec mi424-wr network adapter wireless thing, but I can't find ANYWHERE on the internet.
  Please help me if you can, it's so incredibly frustrating, not knowing how to solve this problem.
  Oh and you should know that the router is fine, computer laptop my father has great internet connection. the problem is with the computer.
  WHAT YOU CAN DO TO HELP IS APPRECIATED! :)
  This is the model of my office if this is useful:
  gateway, GM5472 Personal Computer
  Here's the thing about verizon adapter model:
  Actiontec mi424-WR Rev.D
  Thanks in advance

  Hello

  Download the software for your device from the link below.
  http://opensource.Actiontec.com/

  Also check if there is a firmware update available for download for your network card and also read the FAQ section on the link below:
  http://www.Actiontec.com/support/product_details.php?PID=188

  For more assistance, contact Actiontec support.
  http://www.Actiontec.com/products/contactus.php

• Simple problem - HP 4 technicians - baffled very disappointed

  I have a laptop DV9500. It has a bilingual keyboard. Pressing function + home does not give me "printscreen" as indicated on the keyboard.

  I tried many languages of entry selected from several versions of Windows, and the print screen function will not work.

  To see a photo of the keyboard (I found the image on google): click here

  The laptop is fine. The keyboard is fine. I tested the two completely.

  What is not fine is no HP has a solution to this fundamental problem. They transferred me 5 times today, sometimes up to the assumption of level 2 and then come back. I had this problem since day 1 and I continued to call and call and nobody had ever a solution. Finally after the call once a month to see that if a solution was available, my warranty missed and no past level 1 talk to me. This deserves some attention more.

  Here are a few possible solutions:

  (1) one must 'stick' after pressng printscreen.

  I know how to use this feature.

  (2) your button is broken.

  The standard function of the button is fine. The function key is fine. The two handset is not very well. It seems unlikely that the button is just half broken.

  (3) restart, entry to remove from other languages, etc.

  I did the next best thing. I formatted several times with multiple operating systems.

  (4) try a new keyboard.

  I did not yet because if I buy a new one on ebay, and the same problem happens again, now I have the money wasted, but I will try to use the keyboard to someone else to see what is happening, but I doubt that the keyboard is very broken highy. Printscreen works with a keyboard USB (duhh).

  (5) your motherboard is broken.

  No, it's not, I tried two motherboards. The same problem.

  (6) uninstall the keyboard driver.

  Been there, tried.

  (7) try and see what happens.

  Here is a list of some of the input languages that I have tried:

  English (Canada) - U.S.

  English (Canada) - Canadian French

  English (Canada) - Canadian multilingual Standard

  English (United States)-U.S.

  English (United States)-United States-International

  (8) antivirus, spyware, etc.

  This is not it.

  At this point I'm transferred once again, perhaps to support level 2, perhaps to another guy in India, and the same thing happens again. I'm pretty resolved that HP has designed a product that does not, does not and will not work as advertised.

  Either way, blue french characters also do not work properly. Selecting a layout in french and using the different shortcuts to activate the "weird" symbols don't work. A lot of research on google and forum navigates more later gave no solution either. What happens here?

  Message edited by NArkshaRK on 05/09/2009 18:10

  I solved this problem. HP installed incorrect keyboards on this range of notebooks. Some of the buttons are labeled incorrectly.

  Regarding the printscreen, it is hidden under the insert/scroll button. I found this by using battlefield game. I went to the controls set up and pressed every button and copied what the game says was pressed.

• Simple problem - can not get degraded to work... done before text.

  What gives? I made a banner that was the text with a gradient in the another week w / no problem. Today, I make another and it won't work! It looks fine in the IDE, but running the file it just shows the gradient block and no text. Even when running in a browser. It is a classic, set text as a mask on a drawn rectangle that has a gradient applied. Does not same setting of the area have a Uni fill. If I divide the text into forms, then it works.

  What Miss me?

  Il0 - selectable text. With disabilities and it worked.

• Simple problem - error 1046

  Hello

  So when I publish my flash I have this error "1046: Type was not found or is not a compilation constant: objectifs_btn.»

  Here is my small code...

  import flash.display. *;
  import flash.events.MouseEvent;

  objectifs_btn.addEventListener (MouseEvent.CLICK, ouvrirPopup, false, 0, true);

  function ouvrirPopup(evt:MouseEvent):void {}
  popup_mc.gotoAndPlay("on");
  }

  (objectives objective = and ouvrirPopup = openPopup in English)

  I went into my settings from AS3 to uncheck "automatically declare all instances on the stage" (can be written a little differently, literal translation here).

  My movieclip instances are really named 'objectifs_btn' and 'popup_mc', no spelling mistake.

  I looked in various forums telling me to add the two first lines (the ' import' ones), I did. But the problem is still there.

  I'm sure it's an obvious problem, but I can't see it.

  Thank you very much.

  Thank you for your advice.

  Here is the code I got when I completely removed my name of the instance (but I'm sure he gets nowhere to say, because it is obvious that the code does not work with no instance name): "1120: access of undefined property objectifs_btn.»

  In addition, I am 100% sure my instance have been appointed right since I copy me - pasting from one place to the other. And in addition, I have neglected the more then once to be sure. The code is so small, that it is not as if it was difficult to verify.

  I've done a few test more, just to "know-why" (it's nice that it works, but it's even better to know why he wasn't in the first place). I handed the "_btn" at each location, and the code does not yet. When I removed it once again: it worked. If I tried something else: it worked. And more surprisingly, if I tried an another name + "_btn" it works too!

  So here's another speculation: can it be because my instance name has been exactly the same name as the movieclip that it did not work? It changes even the smallest (by removing the plural for example), make the code works!

• simple problem of 3-d rotation

  I have a symbol of an invoice of $10 I want to right rotation as it turned as standard sign at the top of a building. I created a 3d motion tween and define the axis y to 720 degrees so it would turn a few times.

  That is the problem. It works but only if I have the symbol at the top of the page. If I move the symbol to the bottom of the page when the symbol turns it startts rotation somewhat biased. No idea why this is happening and how to fix it?

  Thank you

  Looks like you want to adjust your vanishing point. Select the instance and look / adjust the settings in the section "3D position and view.

• Simple problem: prevent swf to be entered on the external Web site

  Hi all

  I think it's easy, but I'm not good enough to do it, it seems.

  I have a SWF on my site (SiteA.com) and I want SiteB.com to be able to put it on his website, but not anyone else (for example SiteC.com).

  I created a swf file "loader" on SiteB.com with this ActionScript 2.0 inside:

  loadMovie ("http://siteA.com/success.swf", test);

  and it loads. Ok.

  BUT: If someone put the same "loader" on SiteC swf can load it too.

  How can I stop SiteC load?

  Even if I put System.security.allowDomain ("siteB.com"); in the original swf that even SiteC.com can load everything right.

  To do, even if the policy cross-domain (on siteA.com/crossdomain.xml) file is more restrictive. Or even without it.

  I followed the instructions on the adobe devnet website, but the problem remains.

  I tried to use two Windows 7 or XP. I also tried to embed the swf file, but everything works well: in fact too good!

  Thank you very much

  to allow the use of your SWF when it is not load:

  System.security.allowDomain("site1.com");
  
  urls_allowed = ["site0.com","site1.com"];sitelock(urls_allowed);function sitelock(urls_allowed) { lock = true; domain_parts = _parent._url.split("://"); real_domain = domain_parts[1].split("/"); domain.text = real_domain[0]; for (x in urls_allowed) { if (urls_allowed[x] == real_domain[0]) { lock = false; }if(_parent==undefined){lock=false;} } if (lock) { _root._alpha = 0; }}
  
  
  

  p.s. Please mark this thread as answered, if you can.

• Insert simple problem.

  Hello
  I had a simple insert that throws the error on line 9 below

   values      ( & emp_id  ,&emp_name );
  PL/SQL: ORA-00936: missing expression

  create or replace procedure emp_id ( p_test_input in varchar2 )
  as
    emp_id number;
  emp_name varchar2(20);
  manager_id
  begin
     if ( upper ( p_test_input ) = 'I' )
     then
        insert into emp
        values      ( & emp_id  ,&emp_name ,&Manager_id,sysdate );
     elsif ( upper ( p_test_input ) = 'D' )
     then
        delete from emp
        where       emp_id  = &emp_id;
     else
        dbms_output.put_line
           ( 'Please input ''A'' for ADD or ''D'' Delete  EMPLOYEE'
           );
     end if;
  end;

  Hello

  Rede says:
  Sudhakar,

  Thank you.

  But I ihave to pass all variables as parameters when calling a stored procedure?

  # If you give default values to arguments, then you can choose do not pass them on.
  For example:

  create or replace procedure     emp_id
  ( p_test_input      in      varchar2
  , p_emp_id     in     NUMBER     DEFAULT 1
  , p_mgr_id     in     NUMBER     DEFAULT NULL
  )
  IS ...
  

  You can call the procedure with 1, 2 or 3 arguments:

  emp_id ('D');
  emp_id ('I', 9876);
  emp_id ('I', 9876, 9999);
  

  The calls above are equivalent to the calls below, in order:

  emp_id ('D', 1, NULL);
  emp_id ('I', 9876, NULL);
  emp_id ('I', 9876, 9999);
  

  In this case if the user wants to delete only the operation he might know only remove emp_id not all information as emp_name, manager_id which are not null fields.

  You can have two separate procedures: one for INTEGRATION and another to REMOVE.
  Assuming that there is a good reason for having just a procedure, i.e. once when you call the procedure with an argument.

  And also some we know only insertion of a PGE values and we cannot not simple pass null as a parameter to remove the condition.

  Sorry, I don't understand this sentence.

• Shockwave - simple problem

  Hello
  
  I need to have a .pdf file come in a separate browser window from in a Shockwave animation
  
  Can someone tell how to write the equivalent of _new target then use gotonetpage
  
  on mouseUp
  gotoNetPage "" http://www.tacklesport.com/anims/pdf/bball.pdf?target=new " "
  endthanks
  
  Mike

  Perfect - new it would be something simple... those dammed speech marks!

  Thank you very much

  Mike

• "Simple problem" I hope

  By the way, I have the first Cliq not the XT

  Why my cliq switch to landscape automatically in images, videos and the web? Only the portrait all the time. And the update 2.1 here yet?

  I was looking at the Windows phone 7 HD lately instead of S, the galaxy Vibrant, what do you think? Thanks Robert

  The 2.1 for Cliq update is available for download in the section Cliq on this Web site.

  http://www.Motorola.com/support/us-en/Android_Products/Software_Update_Landing_Page/CLIQ_Software_Up...