Simple question table in Firefox

Similar Questions

• Delete the Simple question table

  OK, so I promise you, I'm not a fool, but I could be lying at the monment.  I have a table, an orgenized good demisional, I need the unique elements.  I wrote an admitted that it is a little messy method to do such a thing, but it works logically for me for the most part.  The table currently has 69 items, and at the present time, there are only two unique values.  I could just listed them but that would mean I have to roll updates whenever a new brand comes out.  So now, when I run my program it will remove about half of the table and decides that he doesn't have to obey logic more and keep the rest.   I compied the segment of code that is the problem and registered as a VI for your pursoual and I wired in a copy the avictive table so that you can see what I mean. The code works wonders for 35 early iterations of the loop, and then something goes wrong terriably.

  Someone at - he a clue

  Mark R

  I would suggest just a much simpler way to do what you're trying to do.  Use of conditional indexation Tunnels.

  

• Create a group of users to ACS 3.3 - simple question

  Hello

  I have a simple question:

  How can I create a group of additional users at the ACS 3.3?

  I don't see the option to delete or create groups of users. Perhaps is it not possible?

  Thanks in advance

  All groups that you have already exist in the list of groups (0 to 499). To "create" a new group, just rename one of the unused existing groups and use.

  If you don't see the groups in your list, you must verify that you have access to see all these groups.

  Verifier check in the control of the Administration, select your admin user ID. In the second table below marked 'administrator', you will see the "available groups" and the editable section 'groups '. move the groups that you want to use available for editable.

  Present and then OU should be able to see these groups on your drop-down list in the section groups.

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.

• Simple question about NVL

  Hello

  It's simple question on NVL, here are the details:

  create table tb_test (number (3) id, varchar2 (12)) nm;

  insert into tb_test values (111, 'AAA');

  Select NVL (nm, n / 'a') in tb_test where id = 222;

  I don't have "N/a", which is what I expected. Any comment?  Thank you!

  Hello

  If you want a row of output, even if the query produces no line; right?

  This looks like a job for outer join:

  SELECT NVL (t, nm, n / 'a') OUTPUT

  OF the double

  LEFT OUTER JOIN tb_test t ON t.id = 222

  ;

  LEFT OUTER JOIN ensures that each row in the table to the left (i.e. immediately before "LEFT OUTER JOIN") will join, even if the condtion join fails.  It is 1 row duplicate, therefore, if there is no line in tb_test that fills the 'id = 222' condition, that the double row will be in the game anyway.  If there is tb_test lines that meet the condition, they all appear in the result set.

• Simple question - alternative text of the attribute in the same Word document

  Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
  
  Is there a simple way to alias an attribute for use in Word?
  
  For example, the following two conclusions create 2 attributes where I want only 1 attribute.
  
  annual percentage rate = 6
  APR = annual percentage rate
  
  Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
  
  Sorry for such a simple question, but sometimes I get too deep into the weeds.

  Hi Paul,.

  You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.

  It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.

  I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).

  Essentially how it works...

  Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example

  APR is the annual percentage rate
  

  Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.

  Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example

  [legend]APR is the annual percentage rate
  
  the result = APR * 10 
  

  I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.

  See you soon,.
  Jasmine

• Assessment JavaFX: a few simple questions

  Hi all.
  
  I am to evaluate the possibility of migration of Swing to JavaFX development. I have a few simple questions, and simple answers will suffice.
  
  1 is mature enough to support all Project Professional JavaFX?
  
  2. JavaFX is a functional superset of Swing? I mean. Is capable enough to do any other thing that Swing can make JavaFX?
  
  3. is also well documented that the Swing JavaFX is? I mean especially the Swing tutorial and the Javadocs.
  
  4A JavaFX equivalent to "treeWillExpand" event? Also important in my case.
  
  5 a JavaFX frames internal for the development of MDI?
  
  6a JavaFX equivalent of JFormattedTextField? I use this component intensively for the validation of the data and formatting.
  
  7A the JavaFX AutoComplete text field component? Or is it difficult to develop a custom for this component?
  
  8. is it is possible to mix different styles of text (i.e. text color) in a text field component?
  
  9 is it difficult to create custom components and extend/decorate existing ones?
  
  10. is the beta for Linux mature enough to start trying? Can I use Netbeans with the current beta on Linux?
  
  Thank you!
  Antonio.

  I'll take a shot at answering them, some of them are probably better answered by one of the developers if:

  1. it seems stable and has a feature set large enough should allow you to create the lack of parts yourself

  2 JavaFX and Swing are unrelated to each other. JavaFX has its focus more on the provision of outstanding visual effects without trying to look the same as other applications on your platform. For example, control of JavaFX table doesn't have a built-in filter support and sort - it's something you can do yourself with appropriate templates.

  3. There are some examples out there already but no where near as many Swing. However, the Javadocs seem good enough, I could usually find what I wanted there.

  4 are not specifically, I think, but I'm sure that you should be able to veto over enlargement, by changing the State where you receive when a node is open or by consuming the appropriate event. Better write a small test for this program to see if you can do what you want - and if not, a feature to apply.

  5 I don't know well.

  6 No.

  7 there not. It is not too difficult to develop custom components.

  8. not directly I think, but a combination of FlowLayout + text objects must be able to do what you want.

  9. I developed some custom components, mainly by combining other components and that seems pretty easy. I don't know how you can change the functionality of a component exist (such as change the text field component in a text formatted field or who can use several colors; you will probably have to create your own skin for more delicate changes. Skin isn't very well documented.

  10. I do not know this.

• Simple question - how to make an onchange event occur in a select list

  Simple question - how to make an onchange event occur in a list to start a process of selection?
  Thank you

  (1) with the ApEx selection about to submit list.
  You create a PL/SQL process after Submit. -> Request for conditional Type = Expression1. -> Expression1 is the name of your selection list. Treat the Source - > procedure you like. For example based on your select list value you add rows in different tables.
  (2) Javascript this example will change a system parameter value when changed

• Simple question-how to call a stored procedure or function of apex?

  Simple question-how to call a stored procedure or function of apex?
  Thanks advance.
  Doug

  Hi Doug,.
  You can call a procedure or function of apex. It depends on what you want to do with the function or procedure. If you want to retrieve table data in a specific area, you can try something like this-

  The following statement creates the function get_bal on the oe.orders of sample table (PL/SQL is in italics):

  CREATE FUNCTION get_bal (acc_no in NUMBER)
  RETURN NUMBER
  IS acc_bal NUMBER (11.2);
  BEGIN
  SELECT order_total
  IN acc_bal
  Orders
  WHERE customer_id = acc_no;
  Return (acc_bal);
  END;
  /

  The function created in the previous example can be used in a SQL statement. For example:

  SELECT get_bal (165) FROM DUAL;

  GET_BAL (165)
  ------------
  2519

  hope this will help,

  Kind regards

  Pascal M
  http://Tajuddin.whitepagesbd.com

• Can simple Question - I do the colors change in tabular form

  Can simple Question - I do the colors change in tabular form.
  How can I change the colors, green, white alternating on tables?

  Doug,

  Here's some javascript that I use for tables/reports of Ray...
  Don't forget to replace "t15" with your model references.

  
  
  
  
  Also, if you go edit the report template > Column Templates > Column Template 1 > You can set the condition to even/odd rows and then add in your own html/css..
  
  

  #COLUMN_VALUE#
  

   -Chris
  

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1

• simple question to function test of value chain

  Hey guys,.

  I m just started using teststand.

  My simple question is related to the function "test string value '. What is the difference between the "type of comparison' CASE SENSITIVE and IGNORE CASE? From my point of view are not really meaningful names.

  To avoid simple and stupid questions like that, I tried to use the internal helper function. I'm wrong when I say that the help features are not as good as in labView? I couldn t find any answer to my question... hmmm... How other people handle this situation? (outside of just trying?)

  Thanks for your help

  Hello

  Case SENSITIVE: it will fail if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  IGNORE CASE: this will pass if you compare "HELLO" with 'Hello' or 'A' with 'a '.

  Hope that explains

  Jürgen

• I don't have to fix anything; I have just a simple question.

  I have just a simple question: what is maximum allowed data on Microsoft Outlook Express emails? Please, let me Know.Thank you.

  You should check with your ISP for this information. Your ISP mail servers dictate the maximum size of your mail more attachments. Outlook Express is simply a client program to encode, and send/receive binary data for you.
  Microsoft® Security MVP, 2004-2010