Simple rotation question

I have a small arrow at the bottom of the screen which I want to turn in place, as it is. When I try and rotate the image, even if it turns around the center of the display screen and not around him. I thought that it was a simple matter to change the anchor point but I'm not sure how it is done and my trouble guessing has gotten me nowhere fast!

Thank you!

With the clip selected in the sequence, go in the effects Panel (it should be in a tab under your Source monitor); There, you will see a built-in effect called movement, with a small square near her icon. Click on this icon or the word 'Motion' and the viewfinder appears in the monitor of the program for this particular item. Rotate downwards trajectory (the small triangle to the left) effect and all the effects that you can adjust will appear. From there, you can proceed as above. What the effects are similar, for reference:

Also, I assume you mean that you used the titration module in the body to make this triangle/arrow. If so, you can easily open this title and move the triangle, the arrow towards the center of the "Web" by clicking on the Center Horizontal and Vertical buttons. This will put the anchor Point in the middle of the graphics, which in fact turning a little easier. See my first response to this information.

Tags: Premiere

Similar Questions

BlackBerry Smartphones Dtek50 auto rotation question

Hello community,

my old Dtek50 of a month, sometimes stops auto rotation toggle turn same auto is on. I checked the settings-accessibility - auto rotation... is on. Device settings-display-when is turned isn't properly adjusted on do rotate the contents of the screen. I did the test of the sensor with the expert virtual Blackberry and the sensor works very well. I tried with a game using the sensor and everything is ok. A simple reboot solves always... but it's a bit boring.

Last week, it happened twice. I noticed this problem after update from September.

Anyway, today I did a factory reset... I'll monitor the device without having to install the apps I use generally.

Has anyone else experienced this problem?

Auto rotation problem solved! As I said in my previous posts my sensor has worked well (and so I have is maybe a software problem, kernel?).. .so I tried a few apps from the game store: the only one who's really works: "auto rotation to lie down". For those who are facing the problem just install the app and give the requested permissions. Works like charm! Glad for not having sent the smartphone for repair!

If exposed simple of questions?

Alright fellow programmers. Once more what I meet a problem I have EVER had with other JAVA programs before. IAM trying to figure out how to write a simple if statement and I have questions. I did Google search and have found something to help. So, if you could please tell me what may be the issue? The error message is "error {invalid AssignmentOperator. syntax". Thanks in advance!

Double BinRadius = (Integer.parseInt (txtRadiusFeet.getText ()) * 12) + Integer.parseInt (txtRadiusInches.getText ());

FieldChangeListener CalcListener = new FieldChangeListener() {}
' Public Sub fieldChanged (field field, int context) {}
Double BinRadius = (Integer.parseInt (txtRadiusFeet.getText ()) * 12) + Integer.parseInt (txtRadiusInches.getText ());

{If(BinRadius==0)}
Dialog.Alert ("Hello");
}
};

Capital I yew?

A simple PHP Question

Hey guys,.
I learn some basic PHP to make a simple form, and I have a small question. I have these two test of the PHP, Form.php and acion.php files. What you enter in the form is then displayed via $_POST to action.php that gets displayed. Here are the test sites:
http://christianstest.info/phptest/form.php
http://christianstest.info/phptest/action.php
And for two, verry simple code:
Form.php
```
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>PHP Form Test</title>
</head>

<body>
<form action="action.php" method="post">
 <p>Your name: <input type="text" name="name" /></p>
 <p>Your age: <input type="text" name="age" /></p>
 <p><input type="submit" /></p>
</form>

</body>
</html>
```
and action.php
```
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>

<body>
Hi <?php echo htmlspecialchars($_POST['name']); ?>.
You are <?php echo (int)$_POST['age']; ?> years old.
</body>
</html>
```
Now I want to do is have action.php store data entered in Form.php so that someone could link directly to action.php and see what the end user concluded Form.php. Now, if you go directly to a non action.php caching it does nothing for the return of name and age. How can I get this data stick? If in fact, it is not a simple question, can you point me to a tutorial? Thank you!

You'll want to republish this topic in the Dreamweaver forum:

http://forums.Adobe.com/community/Dreamweaver?view=discussions

Take care, Mike

validation to a specific table only and simple a question on the dml trigger
Hi all

guess I am connected to a database with the user ' scott'/'tiger'@orcl and I have the fire instructions insert on 2 different tables allows say tables is
(1) emp
(2) Dept.

and now I want only to commit the emp table and not the table dept, is it possible to do?

Another question, I have... are commit simple dml triggers auto or not?

Concerning
Rahul
Mac_Freak_Rahul wrote:

and now I want only to commit the emp table and not the table dept, is it possible to do?

No, it isn't. You post a transaction, not a table...
So if you have handled several tables in your transaction, you agree to be all these changes (via the command commit), or any of them (via restore).

>

Another question, I have... are commit simple dml triggers auto or not?

If your dml trigger manipulate data (a very bad practice by the way), then they just add to all of the changes made to the breast of your transaction, you (as mentioned above), either commit all or none.

simple thread question

Hello world
My question is quite simple. I have two text boxes. I wrote "123" in the first text box and 'abc' in the second area. When I put the two boxes, the content in the second box automatically flowed to the first area, because there was space in the first box. Now the first box shows "123abc", and the second box is empty.
How to stop Indesign automatically cela. Is this possible? I know I can do it by screwing the two boxes first then the input data, but I have already entered all my data and it save me a lot of time if I can just have screw now. Thank you very much!
Simon

Until you put frames, insert a frame break in all Type > submenus insert a special character

Then content don't flow from 1 in frame 2 frame when you put on, because you insert a frame break stops at what happens.

Table Simple Dreamweaver question

I have so many tables, 100 rows, 5 columns for my data. Here's my question, is there a way to tilt the table given above then go down and up and down. All my data is from the old to the new, when I want recent to old. I know that you can do in Excel by alphabet or date, id there a way DW

Someone can correct me if I'm wrong, but I'm sure you can't sort a column or row of values in a table html using DW. What you could do is create your list in Excel, sort the list in Excel and copy the range of the table and paste it into DW, which will create a perfect html table. You can also copy and paste from Dreamweaver to Excel, but it is not as simple. You will need to copy and paste a column at a time, and you will have an additional empty line for each line populated.

Another solution is to create a mySQL table that can be easily sorted and uses PHP to display the table on your page. You must know at least the basics mySQL and PHP to do that, but if want to add constantly new records to your table, mySQL is your best solution. If your table is static, the first solution works perfectly.

Really simple (hopefully) question about GPIB-USB-HS

I tried to reconnect a GPIB-USB-HS to a network through a PC HP on shelf Analyzer. Before removing the GPIB-USB-HS system about a week or two ago, Network Analyzer (a vintage 1989 HP 8720 vector Network Analyzer) had worked well with the GPIB unit. Now that I reconnected the GPIB device to network monitor, measurement and automation seems not be able to detect the Network Analyzer.

My question is: if my GPIB-USB-HS appear in measurement and automation, and it passes the NOR-488. 2 troubleshooting of HW and SW utility test, it would be safe for me to assume that whatever connection problems I have with the Analyzer network, rather than with the GPIB-USB-HS itself?

Thank you

Armando83

I finally got the connection working again. I just had to tighten the screws on the GPIB-USB-HS to make sure it's a good connection to the Network Analyzer so that it can work.

Thanks again for your help, Dennis.

pictures in Windows Photo Viewer disappear after simple rotation. Help!

I used for years Windows Photo Viewer to display and rotate the photos uploaded to my computer. Recently, I noticed that if I turn and switch to another image (just like I always did), one that I shot saved says he then went to the folder. When I get on my computer, it appears that it is in the correct file, but when I go in the file, it isn't here. Also, if I try to save back to the file from another source, it asks if I want to replace the existing file. Help please!
Kim

The files may be hidden. Might be interesting to try
Change the following setting and maybe photos
Re - appears.

Windows XP: Show hidden files

Reach... Control Panel / folder Options / View tab.
... To check "Show the hidden files and folders" / apply / OK.

Windows Vista - Show hidden files
http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

Windows 7 - show hidden files
http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

If the photo thumbs reappear... they can look washed out...
to clear this up... right click on a picture or a selected group
or folder and choose... Properties, uncheck the box.
'Hidden' / apply / OK.

The following link can enlighten us:

McAfee - Windows 7 library files are not displayed
http://service.McAfee.com/faqdocument.aspx?ID=TS101228

simple sql question

What's not here?
Select "update lookup_Nationalities set NAME = 'Philippinien' where NAME =' |" NAME of lookup_nationalities.
I want to have commands like update
Update lookup_Nationalities set NAME = 'Afghanistan', where NAME = 'Afghanistan ';
Update lookup_Nationalities set NAME = 'Belgien' where NAME = 'Belgien ';
Update lookup_Nationalities set NAME = 'China' where NAME = 'China ';
....
thanx

Hello

Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements), so that people who want to help you can recreate the problem and test their ideas.

Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

If you ask yourself on a DML statement, such as UPDATE, then the CREATE TABLE and you post instructions INSERT must re - create the tables as they are to the DML, and the results will be the content of the or a modified tables when it's all over.

Always say what version of Oracle you are using (for example, 11.2.0.2.0).

See the FAQ forum: Re: 2. How can I ask a question on the forums?

2843667 wrote:

What's not here?

Select "update lookup_Nationalities set NAME = 'Philippinien' where NAME =' |" NAME of lookup_nationalities.

I want to have commands like update

Update lookup_Nationalities set NAME = 'Afghanistan', where NAME = 'Afghanistan ';

Update lookup_Nationalities set NAME = 'Belgien' where NAME = 'Belgien ';

Update lookup_Nationalities set NAME = 'China' where NAME = 'China ';

....

thanx

If you want to include single quotes inside a string literal, use either 2 single quotes inside literal, like this:

Select "update lookup_Nationalities set NAME =" Philippinien "where NAME =' |" NAME

of lookup_nationalities;

or use Q-rating:

Select Q '{update lookup_Nationalities set NAME = 'Philippinien' where NAME =}' | NAME

of lookup_nationalities;

Whatever it is, you don't want anything like ' | ' at the end, after the «;»

Be careful: I bet that you do not want the output to be something like

set lookup_Nationalities set NAME = 'Philippinien' where NAME = Sverige

I suspect you want single-quota around Sverige, too.

Ellipse tool at rotation question

Hello
When I rotate an ellipse change size and shape are elongated.
If anyone has an idea how to solve this would be useful.
See you soon

In other words, scrap what you have and work in a mock-up AE with square Pixels - a Pixel Aspect Ratio of 1.0.

A few simple newbie questions

I've been running Windows Home Server on an old Dell Zion (Yes - quite pokey), I see that Dell has many things on an I3 PowerEdge T110 II. I did a lot of search in the online documentation and manuals, but have a few unanswered questions:

o the server has a built-in SATA controller? The manual says 6 SATA connectors, but when I tried to configure the server for the purchase, it was persistent to choose me a PERC controller card. If there is a controller of the motherboard, will it be enough?

o once again, trying to set up with UEFI boot, he said conflicts in configuration. I am the command without hard drives, but to use an existing drive to 4 TB. I'm going to need to configure GBT and will require UEFI, I think. Is this a problem?

o any person aware of all the problems with Windows Home Server 2011 running on this platform?

They are sold individually as no disc/OSless as the default configuration. That's fine, but I wanted to buy a couple of company drives to go with it. When I tried to configure the system with hard drives, came when all configuration conflicts. I'll try to call tomorrow, but I think the community is generally better informed than the sales people. It looks like I'll buy the unit without disc and add my own records. Recommendations for hard disks that are reasonably reliable (and cheaper than Dell)? I want to run RAID 1.

My 'adventure' is about to begin. Thanks for the help!

Al

achuneke

The server has a built-in SATA controller? The manual says 6 SATA connectors, but when I tried to configure the server for the purchase, it was persistent to choose me a PERC controller card. If there is a controller of the motherboard, will it be enough?

Yes, he does. Don't forget to check the Onboard SATA under hard disk Configuration option. If you enable RAID, you will get the S100 controller... let off RAID and use RAID software Windows instead.

achuneke

Yet once, trying to configure with UEFI boot, he said conflicts in configuration. I am the command without hard drives, but to use an existing drive to 4 TB. I'm going to need to configure GBT and will require UEFI, I think. Is this a problem?

You can't order a server without a disk (see below *). If you plan to use your own, order it with the most small/less expensive available drive, then swap later. You have NO need to specify a UEFI/BIOS at the time wherever you order the server if you intend to swap the hard drive or install the OS yourself.

achuneke

Anyone aware of any issues with Windows Home Server 2011 running on this platform?

I don't see any, other than the fact that he didn't is not officially "supported", so you may run into issues at some point, but I suspect that there won't be any.

* You said they sell it "diskless", which I have never seen. If you can, great, but if not, see my comment above. Business records are only needed if you use enterprise-class RAID controllers. Do not use the S100... is not (is not) a "business" class RAID solution

'Real' RAID controllers (like the PERC 6 / i or H700) are not supported in the T110 II, so you don't ' really need to business records. Some have reported PERC 6/7 works to T110 II, but it is not supported, and if you choose to go this route, then make sure you have some good records designed for these controllers.

Simple Javascript question

Please forgive me, I am very new to JavaScript and Acrobat.
Can someone tell me the phrase I would use to several a number entered by a user; which would be multiplied by a fixed number? Please see image:
The user number of backpacks, they enter the first area, the second box would have several sales of 50.
Please let me know if you have any question. I spent some time trying to get this to work, everything I try the product and error.
Your help is very appreciated!

Hi rachelNS,

You can send me a sample form and I would try it for you.

Then you check the script on your side. Also, I would like to know what is the version of Acrobat you are using?

Kind regards

Ajlan Huda.

Simple join question
Hi guys, I'm confused.

I was always told that one table can have ONLY 1 primary key. is this true or false? Or a table can cause several primary keys?

Second question is, if I join two tables that are formed as a result of columns.

Table 1:
Account_number
Account_create_month
Customer_address

Table 2:
Account_number
Account_create_month
Customer_phone

Should I join on account_number AND account_create_month? If yes why? and why not? Sorry if this is a stupid question. I'm just very confused. Thank you
Hello

Z KHAN wrote:
Hi guys, I'm confused.

I was always told that one table can have ONLY 1 primary key. is this true or false? Or a table can cause several primary keys?

A table can have 1 primary key. There may be any number of columns (1, 2, 3 or more) in the primary key.
A table can contain any number of unique keys.

Second question is, if I join two tables that are formed as a result of columns.

Table 1:
Account_number
Account_create_month
Customer_address

Table 2:
Account_number
Account_create_month
Customer_phone

Should I join on account_number AND account_create_month? If yes why? and why not? Sorry if this is a stupid question. I'm just very confused. Thank you

No, you do not have to connect using the two. If you use the two in a join given or not depends on what the data means, and what results you want.

Potentially simple Snapshot question

Hello. I think it would be a simple thing to look upward, but for some reason that I can't find the answer to the it.
I am running Vi3 with ESX 3.5i hosts 4. I need to know exactly where a VM snapshot records in. I have a 250 GB drive on an FTP server that I have I envy snapshot in the future. I just formatted a table iSCSI with 440GB LUN. So if a snapshot of my 250 GB drive MUST reside on the same LUN as the original machine, obviously I would not have enough space. Can I choose where to store my snapshots?
Thanks for the help,
Tim

With the VM snapshot, they are stored in the same directory as the virtual machine. That said, when you create a snapshot it saves only the changes and therefore the space requirements depend on how long the snapshot has been kept active. Committing, it's quite abit more complicated, but as long as you do not have an active snapshot or multiple snapshots on the virtual machine, you need also not 250 GB in order to commit (which would be just inefficient). Unfortunately I do not know a calculation that will allow you to say that, because it is based on the number of changes and levels of snapshots on the virtual machine.

I think that it is possible to change the directory stored in the snapshot, from the command-line editing the VMX file, however I do not recommend to change. I don't remember the exact setting off my head to do it.

See you soon,.

/ Jonathan

Simple rotation question

Similar Questions

Maybe you are looking for