Simulating inductance
Need help pleazzzzzzzz pleazzzzzzzz. I work as an intern. My boos told me to simulate an antenna/inductor in an RFID application. But I have a problem. Like why is it only then I use a picture of work called something like "Continuous run", I'm going on a 3 week stay. And then I came back, I hope experts Labview have a ready demand for labor for me.
Tanks in advance appointment in 3 weeks people
You must wrap the antenna anti-clockwise, otherwise you get the destructive interference. You code currently only works on the southern hemisphere.
Also get rid of the sequence structure, it acts as a faraday cage, severely limiting the signal. Think about it! Each image in the sequence cost you at least 20 dB. It is well documented elsewhere.
Tags: NI Software
Similar Questions
-
Hi all
I played a bit with multisim for a few years now, but later began to really use the features of simulation of the program. I noticed that transient analysis of the very basic circuits seem to work fine, but nothing more than (especially those using pwm controls) after bogged down as some ridiculously short period of time. Also, before it freezes, things as the output of the oscilloscope function very slowly. I have attached my circuit for reference and using all that you wonderful people out there. What I am doing wrong?
The wizard of error correction is not really take care of the problem.
FYI, this is a converter circuit high power for which I would like to study the out performance characteristics by changing the frequency of the triangular wave or setting of the amplitude of the sine wave from 0 to 1. The goal is to produce a sinusoidal current output to the primary of the transformer. The resistance of inductance and conductor of leakage have been modelled, as well as an inductive load on the secondary of the transformer.
Thank you!
Yes, I tried for a few days and all the other typical timestep of bugs and it does not always work. The solution was to replace the igbt with the command switches in idealized voltage and barrier diodes schottky antiparallel... and on the ground of the transformer floating seconday. It works now
-
Problem in any AC circuit with inductance and ammeter
In any circuit AC I have connected three virtual components: power source of AC voltage (100Vrms, Freq. 50 Hz, phase 0), inductance (0,31831 H) and ammeter in AC mode. After that I turned on the circuit ammeter display '1a '. If I change phase in power at 120 degrees cables, ammeter displays '0A '. This problem exists in multisim 11.0 and 10.x.
Hello. I got it to work when I put 'Initial Conditions' to 'value zero '.
Menu: Simulate / Interactive simulation settings/default settings to analysis transient instruments/initial conditions.
W.k.r.
-
simulate induction motor starting with labview online
Hi all
I want to simulate induction motor in line beginning with Labview. I installed labview control design and simulation, simulation interface toolkit 2009
No, because I don't really know what you're doing.
What you're faking? So far, what you wanted to do is how to "simulate" turn on an engine. A motor is either on or off. If you have a Boolean value which would lead to a digital output which would drive away a contactor/starter motor if you had one of this material. Since you do not, all you can do is put a Boolean indicator on your façade.
You want to simulate these sensors entries as well? Then put a few orders of front that you can adjust you can replace later with the signals from these sensors.
-
Output of Simulator is not appropriate in an external display for Swift
Hello
I am a first time Mac user. Bought a Mac Mini to learn the Swift program.
Version of the OS - OS X
Version of Xcode - 7.3
How to set the Simulator to show the correct output? After placing a button and the execution of the code, the button is placed in various different places for iphone versions.
Ask this question in the Forum of developers for Swift: https://forums.developer.apple.com/welcome
Xcode-click and highlight the fast focus groups. If you are asked a developer user name and password, it is your identifier Apple and your password.
Good day.
-
How can implement you not with Tim Capsule and AirPort their simulation on the iMac?
Hello
How can implement you not with Time Capsule and AirPort their simulation on the iMac?
I don't know what you're asking.
AirPort Extreme is a wireless router.
A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.
An iMac is a Mac computer.
An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.
-
Cannot start Firefox Firefox 34 Simulator
I want to install firefox on my firefox 34 Linux simulator
I downloaded it from this page
https://FTP.Mozilla.org/pub/mozilla.org/Labs/fxos-Simulator/
It has installed without problem, but I can't throw, maybe I can, but I can't find a launcher * text or icon * I remember, it was in web development tools but no I can't find it thereThanks in advance and happy new year everyone
OK it started Firefox WebIDE
-
I need a refund for an airport, I bought the infinite Flight Simulator and I didn't. I want a refund please. Help please.
Purchases are considered final, but you can try the page 'report a problem' to contact iTunes Support and see if they will refund or credit you: http://reportaproblem.apple.com
Or you can try to contact iTunes support via this page: http://www.apple.com/support/itunes/contact/ or https://www.apple.com/emea/support/itunes/contact.html
-
Poor performance on Trainz Simulator 2
I play Trainz simulator 2 for the Macbook, and I seem to get low performance if I have high video settings or if I'm weak on battery. I would like some advice on what are the best settings for my graphics of Trainz.
Here are my specs:
MacBook Pro (retina, 13 inch, mid-2014)
2.6 GHz Intel Core i5
8 GB 1600 MHz DDR3
Iris 1536 MB Intel
Welcome to Apple Support communities
The behavior you describe is normal. Your Mac's only got a GPU integrated, so he can fight with the games running in circles of high quality, and Macs are defined to reduce performance when they run out of battery (to avoid a stop).
The key is to find the right settings for your game to get a decent yield with good quality. Try to choose quality settings average and if that wasn't enough, low quality settings. A MacBook Pro 13 inch with Retina display is certainly not designed to play games with it.
-
Simulator of an operating system of Firefox on firefox nightly
Even if I downloaded firefox OS on firefox nightly Simulator, it apear dosen't here: Tools - web developer - suppose to be there, but it doesn't , but it works on the normal firefox.
The new location for the Simulator and a few other Firefox OS developer tools is located under Tools > Web Developer > App Manager.
I hope that solves your problem!
If so, would you please choose this answer as your solution? This would help other Firefox users to find help on the forums faster and more efficiently. Thank you!
And of course, feel free to post if you need help!
Good navigation!
-
App-Manager does not connect to the Simulator OS Firefox on Windows 7
OS: Windows 7
Firefox: 28
6.0pre8.20140112 Simulator 1.2 Firefox OS
When I run the simulator it opens fine and I see a Firefox OS Desktop
But the App Manager does not connect. The console at the bottom right says:.. localhost:56455 options (the port varies)
.. connection timeout. Possible causes: has not clicked 'accept' (guest).
.. .disconnecting
.. .disconnected
I have disabled my firewall, restarted firefox and even system - did not help
There is a similar bug - but I don't know if we are talking about the same thing:
https://support.Mozilla.org/en-us/questions/988385Thank you
Well - I already knew these links and I can't find anything useful
Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
This one works very well -
I use the default version of Firefox (27) on OpenSuse 13.1. I downloaded and installed the Firefox os Simulator plugin, version 1.1 have searched with Google, but it does not start. If I open the application manager, and then I click on "start the Simulator", I receive the error that no Simulator is installed. But the "Firefox OS Simulator" menu item in the menu "Tools"->"Web development"...
EDIT: in 'Tools '->' plugins' we 'Simulator of Firefox OS 4.0.1 by Myk mind. "
But why?Very well, thanks for that info.
You're not the only user of Linux, the difficulty that there have been a few other reports of the present. While we work to resolve the problem, please follow this bug .
-
How do we uninstall Firefox OS simulator apps
I added app even twice to Firefox OS simulator from two different places, and now I am very confused that is new. How to uninstall another Simulator app?
HI Gurmukhi.
Thank you for your question, your question has been raised, and I'm happy to help you. I understand that you would like to know how to decipher between two install an application on a Firefox operating system Simulator and I will be your key code to the confusion. Security
Let us ensure that this only takes you too long http://xkcd.com/612/ then here are a few easy steps:
(If you use the Extension)- Launch of the Firefox Extension to OS Simulator
- Do this by going to tools > Web Developer > Firefox Simulator
- This will bring you to the dashboard page to see all the applications installed
Check this for add and update apps on a Simulator: [adding and update and delete the apps]
See this for more information [|] [Tools for Firefox developers Simulator]
A more...
[| [The use of the App handler]
The use of the App ManagerPlease note that the Simulator and the BONES are still being developed. For the more technical issues for the development please do not hesitate to consult the development forums. [| [Community project]
If other contributors have more to add don't hesitate!
-
I don't see firefox OS simulator in the menu Tools-webdeveloper
I have firefox 20.0.1.
I installed the firefox OS simulator.
I restarted the computer.
In the menu Tools-webdevelper I don't see firefox OS simulator.It may be that this has to do with the privacy settings or work in private browsing mode. He disappeared in the menu when I changed my settings, I noticed. However, you can always get to it. Put this in your address bar (you can bookmark). This may change in the future, but for now, it works for me.
Resource://r2d2b2g-at-mozilla-dot-org/r2d2b2g/data/content/index.html
-
Firefox OS simulator spontaneously
I have 19 beta Firefox running on Windows 7 Professional 64-bit. I had installed Firefox OS simulator. I was connected to the machine with the remote desktop, but not actively used it. Instead, I was working in another window of independent software.
The OS simulator seems to start on its own. I do not click in the remote desktop window or use the quick access buttons to start. I uninstalled the add-on immediately. Could there be a security risk?
Maybe you are looking for
-
So I got allows you to right-click on a link and go the first option and open this link in a new window.I don't not like tabs, or use them.The latest update or version of Firefox has changed this and nowOpen the link in a new tab first, thenOpen the
-
My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive
-
How can I detect if a step has been ignored?
In an application of C-Sharp, is there a way to detect if a step has been ignored once completed execution? ApplicationMgr.GetRunState () and ApplicationMgr.GetTerminationState () do not say if the execution was complete (Nothing ignored) or incomple
-
HP ENVY M6-1125DX: HP Laptop Battery issue.
Hi HP, I found out recently just a matter of my laptop, specifically BATTERY issue. It's my problem, my battery is displayed this text: "53% available, connected and do not load ' . I did some research and I found a few methods I thought it might be
-
laptop HP 4540 s: Bios freeze
My computer hp laptop hangs when I try to turn it on. He freezes in the bios with the hp logo in the middle and press ESC at the bottom left. When the machine is truned on in the first 5-6 s I can asses the botton of escape, if I'm not it freezes aft