Single-layer or double-layer DVD?

Similar Questions

• double layer dvd win 7 x 64 does not burn

  I can't burn a double layer DVD (Memorex) in Win 7 x 64. Used to be able to but not now. Search many forums, no help. DVD burners have inclluded HL, HP 1260 t and Asus BW-12B1ST. All software and drivers up-to-date, I think. Even tried different DVD, no luck. Single layer all mfg all right, just not burn DL. Frustrated.

  If you can, lower the burning speed.  Double layer DVD are much more sensitive and downright temperamental than 4.7 standard.  And as you know, they are 5 or 6 times more expensive, too!

  Good luck.

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Create recovery media requests double layer DVD

  Good evening everyone.

  I just took delivery of my 5 new books for new employees of my company.

  3 of these notebooks are HP Probook 450 G2 (REF: J4R69EA)

  (These are the models with 128 GB SSD drives)

  The other two are Lenovo E540 with similar specs.

  So let's start, create recovery media. To ensure that is done before I give them to end users in question.

  While trying to create the windows disk, the program "HP Recovery Disc Creator" requires the double layer DVD: "Please insert a DVD double layer to move forward."

  The DVD in question that I use are discs of "Sony DVD + R 120 min / 4.7 GB" that in the past have always worked. (and now work for Lenovo laptops)

  Searching this forum told me to:

  http://support.HP.com/us-en/document/c03481733

  Unfortunately, this is not the same interface I. I choose only a drive to create a backup to

  (in this case, it is drive F:\ internal drive)

  I also tried an external DVD burner with the same results.

  I have not tried a USB, but this isn't what I want, and since you can create a backup set.

  Link to a screenshot: (you must copy paste in your browser apparently)

  http://loxsvc.netau.NET/HP/HP%20Discss.PNG

  It would be not that big of a problem if there was a real windows 7 key printed on the laptop.

  If I had a key, I would just reinstall the machine immediately with an image clean windows 7 so I don't have to clean up all of the HP software.

  but unfortunately this is not the case. So I need a Windows 7 recovery disk must be created.

  Any suggestions apart from the purchase of DVD DL?

  Thank you for your time

  -Sven signed

  Hey @SCamm,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Record double layer DVD-R and DVD + R discs can store much more data. DVD + R DL, also called DVD + R9 are what is needed to create the media recovery on this laptop.  Sorry to say.

  Thank you.

• Problem reading disc double layer, DVD player

  Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

  Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

  Yay for me!

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Can my laptop burn double layer DVD + R discs?

  Hey, I have a laptop of HP G60-213EM

  And I know that I can burn a DVD + R etc but can I burn double layer DVD + R discs? On my PC, I usually use Verbatim discs double layer. And really want a quick answer if anyone knows if my laptop will burn Verbatim dual layer DVD + discs R. thanks

  Easy trolling for the congratulations but not so easy to give the right info. Yes, you have the DVD Multi burner double layer, so you can burn discs double layer. You must also good burning software. Two layers are difficult to do and you get a lot of roller coaster. The jump from Layer 1 to layer 2 to the burning often causes a problem. The best way to do it is to make a .iso to first and then burn.

  Message edited by Hüffer 22/08/2009 16:30

• Is - this Dell Inspiron 530 standard come with double-layer DVD ROM?

  I was wondering if the Dell Inspiron 530, I bought a couple of months back has a double layer, DVD ROM drive? I don't know how to find out - I was not put to level or something when you purchase so it is the standard that came with it.

  Thanks in advance

  
  

• Problem during construction on a double layer dvd

  Hello! I made a dvd of my vacation with yet, but it was so big (6.62Go) I bought a double layer dvd to build. I have a video set as first game and 3 menus that are auto-activées when we choose a different button (as in the tutorial but linda.com I put a video on the background instead of an image).

  When I start to build, the writing is good but to roughly a little more than one-quarter, still ejects the disc. I tried to read the dvd on my computer and a dvd, but he could not read. Please help me as soon as possible. I worked on this project for several days and I am very proud of the result. I want to really over!

  I use the most recent updated even on a 64-bit windows computer 7.

  I did everything and it did not work

  I'll take that as a 'no' to my question.  So I would simplify to see if you can sort out what works and what is not. Rather than mess with what you have, I create a new project, add a menu, use no autoactivate and no introductory video and import one of your videos as a timeline and just a link.

  Does it work?

  I would try each of the main items that John described too.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• multiple bevel effects on a single layer?

  Hello, I decided to participate in the PSCC, and already, I was really happy to know that there is support for layer on groups in CC effects, but in the latest version there is even support to add multiples of the same type of effects on a layer (for example, "stroke") but not all the effects have this option. I was wondering (and hope!) if it's something that will be in a future update?

  As a more minor feedback, I have also not found a way to remove additional effects: say that I added 4 effects of 'coup' in a single layer, that I have not found a way to remove the extra 3, I have created. It would be really awesome if the whole layer effect function has been more than one function "on demand" where you can freely add/remove as many effects of each type as you want and start with a clean slate "" so to speak.

  In any case it is certainly moving in the right direction for what I use it for.

  Thank you!

  The effects of additional weather elimination:

  You can either click on one of the traits in the layers panel and click the trash downstairs, or

  

  Double-click the effects above the strokes in the layers panel, select the stroke and click on the trash can in the layer Style dialog box.

  

• How to convert the pulse signal line single layer

  Hello

  I tried to create a VI that will allow me to convert a pulse signal (generated by a tachometer) in a line single layer, indicating that a revolution succeeded. I would like to overlay this line on other signals generated.

  I am able to detect the falling edge of the signal, but I could not make a suitable line. I tried to create a new waveform, and juggle the markers, but no method worked for me.

  Does anyone have ideas for a good way to do this?

  Below is my test VI.

  

  Make the second vertical lines style trace (trace style: no points, no interpolation, fill - inf). a NaN whener you don't want a power cable and a '+ inf' when you want a vertical line.

  Here's a simple example:

  

• The windows disk image burner 7 burns the large iso files to dual layer DVD?

  The windows disk image burner 7 burns the large iso files to dual layer DVD?

  Hi zuhaibyaseen,

  Follow the steps in the article.

  Burn a CD or DVD from an ISO file

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

• How can I make an adjustment layer affects a single layer?

  How can I make an adjustment layer affects a single layer?

  Right-click the top layer (the adjustment layer) > create a clipping mask

  (or use the Panel menu or the menu layer or various keyboard shortcuts)

• Is it possible to import a single layer of HAVE (and keep as a vector)?

  I created illustrations using layers - export to After Effects (CS6) for the animation.

  Is it possible to import a single layer to HAVE? Thank you very much!

  When importing and Illustrator document as images instead of a model, you are presented with an option to select the merged layers or choose your layer. I'm a little surprised that you even need to ask.