Single page feeds a M175nw MFP

Similar Questions

• LaserJet 2100 - multiple pages feed even after roller and separation block replacement

  Hello

  I have a old and, up to now very reliable LaserJet 2100.

  After experiencing a few problems of collection of papers, I replaced the power rollers and separation for the MF tray and the main tray buffers. Each tray pickup seems to work well and always takes a single sheet at a time.

  However, what power from the main tray (bottom), often (but), a second sheet will be in the printer to receive AFTER the first leaf has been picked up and transplanted (that is, the end of the page has entered the printer). It's almost as if I print a multi-page job, even if it's a single page (that is, the regular test page). The first page comes out of the printer normally and then the printer stops (paper jam error) with an inch or two of the second sheet comes out of the output slot.

  With the covers off the coast, I see that the solenoid is it undertakes to allow the feed roller to bring in the first page, but remains often engaged a bit too long, so a second sheet is picked up * after * the first sheet is completely picked.

  The maintenance manual enamels on the use of signals from the sensors in the paper (or for that matter, even where they are), so I'm a bit lost as to how to solve this further.

  Any ideas?

  It is a problem on older printers. Your question is tray 2 pickup solenoid that controls the movement of the roller from tray 2. It is very difficult to access, and you will need the maintenance manual. What happens when you send a print job the main gear assembly rotates and the solenoid which controls the roll tray 2 active and moves his arms 'L' to release the roller and then turn off the power to the solenoid and the arm of 'L', which is spring returns to stop the front roller it can turn again. HP has used a material damping on the solenoid to calm the activation of the solenoid clicking noise. Over that time off and all that remains is the glue that held up. When the solenoid activates arm 'L' hit the Center and glue residue prevents the arm of his return in time to prevent it from stopping the roll and therefore another sheet is fed. You need to access the solenoid which is behind the main landing gear on the right side. Takes a lot of work and you will need the maintenance manual. Once you have access to the solenoid, you remove, unhook the spring and remove the arm of 'L '. Then you clean the residues of glue on the edge of the coil and everything on the arm of 'L '. You then ask a material felt on the edge when you remove the glue. Put everything back together and it should work another 12 years without problem. Good luck.

• Preview.app stuck on the first page of the PDF in single page mode

  I regularly Preview.app view PDF files and want to use the "Single Page" function to display an entire page at one time. I have 'Single Page' display set as the default behavior.

  Lately when I open a PDF file, they properly open the first page, but I am unable to navigate to another page via the drop-down page, touch up/down arrow. If the PDF file has a table of contents, I am able to go beyond the first page through it and then proceed to navigate normally. If it is not a table of contents, the only solution is to continuous scrolling mode and continue to navigate beyond the first page.

  It's very annoying! Unfortunately, I can't remember where this started happening. It could be when I upgraded to MacOS Sierra, but I can't confirm.

  Everyone else see this behavior?

  Hold down the Option/ALT key, then use the cursor to the TOP or to the BOTTOM of the key.

• Printing of multiple numbers of document/picture on a single page

  I have a separate document for each week of the year, each document has a worksheet in it. I would like to print the worksheets in each document, but want to put more than one of them on a page. Is this possible? So far, I can only print each individual worksheet... Thanks for the tips!

  Hi pmgw,

  I don't know any way to print a table of two separate documents on a single page in a single step. There are several ways to do this using multiple steps.

  1. You can configure individual documents so that the tables you want to place on the printed page even alternate position on their leaves, 1 week at the top, 2 bottom, week 3 on top, etc.
     Two consecutive weeks can then be printed on a single page by printing the first, reinserting the page into the printer using the same orientation *, then print the second.
  2. Open the documents numbers during the two weeks that you want to print.
     In the second, select the table to print. Copy.
     Switch to the first. Click on an empty space on the map. Dough.
     Drag the table glued in position. Print.
     (optional) Select the pasted table and press DELETE.
  3. Open a document of 'Blank canvas' pages.
     Open documents from figures for the two weeks that you want to print.
     Copy and paste the table of each document numbers in the Pages of the document.
     Print.

  Notes:

  Second printing works - Orientation: the best way to ensure that the document is oriented the same for the two rounds is to place a light pencil mark near the center of the edge of the paper closest to you when it is in the tray. After the first run, replace the paper in the tray with the pencil mark in the same position. U

  Table selection: to select an entire table, you can place the mouse pointer on an outer border of the table. When the pointer icon changes to a line crossed by a two-headed arrow, click to select the entire table. Or click the table icon in the sidebar (Numbers ' 09). None of these methods to select a table to move or copy.

  Or (once) click any cell in the table, and then press command + A to select all. Use this method to copy the contents of the table. When glued, the result is the same as copy and paste by using the first two methods.

  The use of the Pages: the advantage of paste tables into Pages is an easier control of the appearance of the printed page. If you do this often, I would say adding guides to layout of the document Pages indicating where to place both calendars, and then deleting the calendars (leaving the guides) and save the document as a template.

  Kind regards

  Barry

• Print texts in different formats on a single page

  Hi all

  Is it possible to print on one page text in different fonts and sizes? It seems that PrintTextBuffer prints all text on a single page at a time and there is no chance to change the format. Thank you

  LT

  I must confess that I give you this suggestion, but I did not use these functions for several years ; test your function on my system now (CVI 2009SP1 on Win7 with HP LaserJet printer) I have the same results as you.

  Due to the limitations of this method of printing, I moved quickly to the other printing modes: there are many discussions you will find in the forums on the reports, but basically, you can:

  • Create a hidden Panel 'report' where to print your data on the standard controls (strings, numbers, graphs, tables and so on) and use PrintPanel to print it
  • Use NIReports instrument
  • Use Office report print (via Word or Excel)
  • Create a PDF file
  • ... (other methods that I can't think of right now)

  One is probably the fastest: you already used to create panels and after a short trial, you can set the correct control/panel aspect for a good report. It also allows you a limited preview if you want to.

• 6210 HP all-in-One pages feed

  I use my 6210 HP all-in-One for about three years without problem. Now, all of a sudden, the pages feed, and when he tries to feed them, it looks like there are gears that are not meshing. The average user can correct? Otherwise, it's an expensive solution? I would like to throw the thing in the trash and start over, but I have three series of black ink and color for her. Thanks in advance for any help!

  Unfortunately, I did it all, and I doubt that the printer is under warranty. I'll check to see what it will cost to fix if indeed, it can be fixed. As I said, the only reason why I would go through that trouble is I have still three sets of ink for the thing! Thanks for your help!

• Print single page...

  Hi people,

  I have a Photosmart Plus B210a under Windows 7 x 64.

  Is there a way to resize or force a print to fit on a single page? Emails are my current problem, with just a few lines in general working on page 2. I tried using gmail, Yahoo and gmx but can't find a way. In addition, with gmx email all the graphics may not print completely, although they appear on the preview before printing.

  Any help and advice welcome! Thank you.

  I tried seraching for a solution to your problem, maybe this will help you:

  http://www.HP.com/global/us/en/consumer/digital_photography/free/software/smart-Web-printing.html

  This is a free tool that you can download.

  "The internet has become easy to print.
  
  With a simple plug-in for browser, Clip & quickly Select or Select & Print web pages just the way you want and eliminate all this waste of ink and paper. Download HP Smart Web Printing and get the favorable impression today!
  
  For Windows XP, Windows Vista® and Windows 7
  For versions of Internet Explorer 6, 7 and 8

• HP deskjet3545 all Rhapsody printing: how to print print multiple images on a single page of Tablet Oudong hp printer 3545

  nothing

  Hello

  First, you must first download a third party application that will allow you to create a collage of images into a single image/page. Instagram has an option to do this and also allows an application named Moldiv - if you are looking for collage app on the game store, you will find much more.

  Once you have the collage of pictures on a single page, you can use the HP eprint app to print your page or if your android phone has the plugin installed (and active in the settings) HP Print, you can print it there.

• HP Universal print driver: printers use duplex for single page documents

  Here's our environment: Print Server Windows 2008 with many different printers HP HP, using UPD. Customers running Windows 7 x 64.

  We configure default duplexing for environmental issues. When a single document page is printed, the printer uses duplex; After the printer page, it brings back the paper to 'print' the empty side of the single page document!

  We lack something hidden in the configuration of the printer? Or isn't smart enough to single-side print when driver/printer duplex is active and only need to print?

  Best regards

  Change the driver on the print server has solved the problem. I discovered that the "smart duplex" was working when printing directly to the printer (IP). We use v5.2 PCL 6 (61.112.1.9321). Changing to v5.9 PCL 6 (61.170.1.18326), which has solved.

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• How to change the region to fit on a single page when printing.

  Hi all

  
  

  I am only recently starting my APEX trip (and I am sure that this is where I want to stay!) please excuse any "dumb" comments I can do!

  
  

  I use APEX 5.0.3 and the universal theme.

  I followed the steps kindly provided by Christian Rokkitta on the following blog to create a tree of the Organization;

  Oracle & Apex Geekery: CSS3 Pure Org-tree with APEX list

  I only have a CSS and JavaScript knowledge, but did successfully a number of changes to meet our specific requirements. Where I fight, it's around areas of printing that do not fit on one page.

  I tried to edit the CSS, I tried to use JavaScript to open in a new window pop up, I have drawn on Print Style sheets and am currently using a modified version of the 'Standard' page template so that I can use @media Print to stop certain elements display. The CSS before I tried to use breaks page and updated scale, but after 4 days of work on anything else, but this printing problem, I'm starting to wonder if I go about it completely the wrong way.

  What is someone is able to help with the above? Basically, I need to make the organization chart fit on the single page when printing. almost as if I had 'zoom out' until it is on a single page and then print.

  I have refrained to put links or screenshots however please let me know if you need more information and I'll get it right above!

  Thanks to you all!

  Richard

  Check page 4 where I added the bottom of specific statements of style for printing.

  @media print {
    .tree li a {
      /*font-size: 15px;*/
      font-size: 0.8rem;
      line-height: 1rem;
      border: 1px solid #000000;
    }
    .tree ol, .tree ul {
      margin: 0;
    }
    .tree li::before, .tree li::after {
      border-top: 1px solid #000000;
    }
    .tree li::after {
      border-left: 1px solid #000000;
    }
    .tree li:last-child::before {
      border-right: 1px solid #000000;
    }
  }
  

• 54.2 error on HP M175NW MFP

  Hello

  HP M175NW MFP - printer
  Product number CE866A
  O/s-64-bit of Windows 7 Home Premium

  Hello

  I bought this printer about a week ago and came to change the cyan cartridge today. It seemed to install correctly, but then an error message came up saying that black toner has not been installed correctly.  I decided to try and remove/reinstall the black, but when I turned the carousel she would stop at the cartridges C, M and Y but overflow and divided black cyan.

  I tried putting off tension so to disconnect, but now I get an error 54.2 and the Squeak you get with problems of carousel. He asked me to pass on but nothing changes. If I try and press the button carousel so that 54.2 error is on the screen, he turns into an error 49 (failed firmware), then returns to the 54.2 after one minute.

  If I open the hatch that the cartridges are not in a position to release - the handle is turned down in the body of the printer.

  He printed long before that (although I also had ghosts of the questions that I'm not happy to).

  I tried the troubleshooting section for this model on the HP site but the 54.2 is not yet listed (even if it's for the series 4500 and 4550, which is pretty useless)

  I hope someone can help - thanks in advance

  Adrian

  [s/n removed for privacy]

  Hello world

  If one or more ink cartridges are installed properly, this may cause a rotation error 54.2 carousel. This error is usually accompanied by a loud grinding noise.

  NOTE: The carousel is the rotating part under the top cover that attach all four print cartridges. (C = Cyan, M = Magenta, Y = yellow, K = black).

  Troubleshooting

  To resolve this problem, see the following information in the order indicated.

  Remove and then reinstall the ink cartridges

  To help remove and then reinstall the ink cartridges, see the instructions below:

  1. Turn the printer off before you start this process.
  2. Lift the scanner (M175) cover and remove the capture of scene (M275), then open the toner access cover.
  3. Look for the carousel brake version, which is the small white tab in the location shown in Figures 1. Using a small pen or screwdriver and hold and then pull the tab toward the front of the printer to release the brake.

  Figure 1: Carousel brake release

  

  1 - a release of the brakes of the carousel

  NOTE: To locate the brake of the carousel, facing the front of the printer, then open the toner cartridge cover. The brake is located on the left side in line with the cartridges.

  3. while now the brake of the exit, turn the carousel forward or backward to align the guides of the print cartridge black on the carousel on the adequate position to remove the cartridge, as shown in Figure 2.

  Warning: Make sure not to touch the mag with the applied toner roller. Oils on your hands can damage the toner mag roller

  Figure 2: Correct alignment for removal

  

  4. remove the ink cartridges when the carousel is in position for the withdrawal of the print cartridge.

  5. Repeat this procedure to remove each remaining print cartridge.

  6. check the cartridge problem for damage (compare to one of the other cartridges if necessary).

  7. Once you have all the ink cartridges that are removed, you will need to turn on the printer.

  8. wait the printer prompts for installation of the cartridges

  9. Enter the cartridge by the Central handle and then insert the cartridge into the appropriate slot.

  TIP- Look for the color icons on the ink cartridge slot to insert the cartridge into the appropriate housing.

  10. close the print cartridge door.

  11. After you close the print cartridge door, the control panel displays the message "calibration or during initialization. Expect that the product is idle and silent before continuing.

  NOTE: If you need to replace a print cartridge, you must close the print cartridge door before touching the cartridge button to spin again.

  12. If you need to replace the other print cartridges, press the icon of supplies () again, then select the next print cartridge.

  13. Press cartridge rotation to rotate the carousel to the next cartridge to print and then repeat the previous steps to replace the print cartridge.

  Warning: Wait for the sounds of rotation stop before you open the print cartridge door every time.

  14. After you close the print cartridge door, the control panel displays the message "calibration or during initialization.

  Let me know if that fixes the problem you are having?

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• Can I export a single page in jpg format from the module of LR book?

  I only see the option to export the entire book as individual jpg.  If I make a single change to a single page, to get the revised page as jpg seems to me export the entire book again. Is there an easier way to get the update page jpg file?

  Alan

  Hi Alan,

  No, you cannot export a single page of the book Module.

  However, you can try the following suggestion if you have a book with a smaller number of pages:

  Duplicate the book in the Collections Panel (right click > book duplicate) > then choose the book duplicate > edit the required page and delete all the pages except that you want to export > choose export to JPEG.

  Kind regards

  Claes

• Can we have several pe: pageCustomizable in a single page?

  Hello

  I have a model which is to have two af:facetRef, so I have two facets for the content of my page. Now, I want to see the two regions, when I'm in edit mode.

  For this I tried adding 2 pe: pageCustomizable in my page, one in every facet. But it does not work.

  So my question is, is - it possible to use 2 pe: pageCustomizable in a single page.

  If so, how?

  If not, is there another solution to my problem.

  Thank you and best regards,

  Erick.

  I don't think you can use two pageCustomizable in a single page.

  What is your use cases? Why your model requires two facets contained? Users can create/edit the layouts in a page in edit mode - if that's what you're after.

  Please elaborate on the requirements and someone in the forum can lead to a solution.