Single RAID 5 disk failure, bad start

Similar Questions

• H200 RAID 1 predicted failures

  Hi all

  I seem to have a strange problem with a RAID 1 array on a Dell R410 server. I urgently need some quick, if possible responses. It'd be so grateful.

  After the blue Server armored one Sunday evening I started to study and found that according to Dell OpenManage console drive 0 was a "predicted Failrure. The indicator light for drive 0 on the front of the server was also orange flashing, probably to indicate this problem. Also, when I checked my backup logs, I see actually between 3 and 4 reported CRC errors.

  I called Dell support and after have run me a DSET report and a Diagnostic test readers online they arranged for a replacement drive. We replaced the wrong disc, waited for the RAID rebuild and subsequently found to our amazement that Drive 1 has now reports a "predicted failure.

  I called Dell again, and they said that it could just be a coincidence. I thought that this is not an unreasonable thing to say, so we arranged to drive 1 to be replaced also. As you have guessed, we have replaced the Drive 1, waited for the RAID to rebuild and here, now drive 0 reports still "predicted failure.

  Then of course, we now know that something's wrong here. We thought that maybe he actually not related correctly as faulty disks, so we made an update of the BIOS on the server, but also updates to the Firmware on the iDRAC 6, as well as the controller of H200 himself. But it has not made a difference.

  Naturally I called Dell again, and they have now made arrangements for the controller RAID itself to be replaced, but also at least one drive (but maybe both, if necessary).

  My question is:
  (1) what could be the cause?
  (2) is the last solution offered by Dell, the best and the most logical next step to fix this, or could it be something else they did not examine replacing yet?
  (3) if the problem is caused by bad sectors, bad sectors can't jump / migrate from one disk to another, they can?
  I guess the worst thing that can happen is that whatever data resident in these bad sectors is now unreadable and unrecoverable, even from my backups? (since there now resynced to the two discs) Or are there other things to consider?

  Having never troubleshoot-performed a H200 heard, I can't tell what you'd find in a newspaper of controller - or if there even is (ex-SAS 6/iR have not one), but you probably have a range of corrupt or damaged.  He may have started with a drive bad - or even two - but if the table has a missing or damaged part on one disc, and he can't read this location even the other player to fix, it signals a problem.  There are two types of failures predicted - physical (drive reports it has a problem and is only a matter of time before, he is asked to do something, he can no longer do - disks will fail diagnosis) and logical (data in the table between the members is unavailable/irreconcilable and it's only a matter of time before a location is requested that the controller cannot provide specific information for causing read this disk failure - drives pass Diagnostics) (if healthy).

  Unfortunately, there is no 'solution' to this otherwise than to drop the table and re-create it.  Running periodic consistency checks can help to mitigate the consequences of these types of errors.

• HP Pavilion 400-434 Office: intelligent control of hard disk: failure

  Hello

  It all started when the computer would go blank right after startup, the HP logo would come upward, then 'auto repair preparation", more... Just empty. After reading the forums online, I did all the possible troubleshooting steps and at the end I did the SMART test... the result was:

  Verification of the processor: past

  Intelligent control of hard disk: failure

  Failure ID: RGD7MK-7HV7RC-9XJ16K-60BB03

  After obtaining these results, when I turn on the computer, it gives me a blue screen saying: drive SMART 1 error (301) and told me to test once again, that I did and got the same result as above.

  Here is some info from the computer:

  Model: HP Pavilion slimline 400-434

  Processor type: pentium (R) of the Intel (R) J2900 @2. 41 GHz

  Thanks for your help!

  Hi there @Brugalgirl

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start successfully, and you found a Smart Drive 301 error code. I'm happy to help you with this.

  I checked the ID of the failure, you've posted and verifies that the error. Unfortunately, this means that your hard drive needs to be replaced.  In view of the fact that the system does not boot, it is likely that the hard drive is completely unreadable, but depending on what you have on this subject, it may be worth your while to check with a local computer service shop and see if they can help to recover data from your hard drive.

  If your system is relatively new and may be covered by the warranty, or if you wish to fix with HP for the guarantee system, you can call in hotline to make these arrangements. In this case, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Otherwise you can look at a replacement hard drive yourself. If you have a set of recovery media, then you already have a factory image HP, which allows you to put in place a new hard drive with your original operating system. If is no longer, you have a set or did not have a set of recovery media, so you can see if there are not yet available for your model.

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know if you need help most. If it solves your problem, please mark this message as a solution.

• Boot disk failure

  From the windows, the following message show:
  Boot disk failure

  You have a diskette in the floppy drive? If so, take it out and restart. Is everything is OK now?

  You have a CD in the CD drive? If so, take it out and restart. Is everything is OK now?

  If the answer to the above two questions is 'no', then your computer is not finding the files of the operating system on the boot device, usually a hard drive. Check if your hard drive is in the BIOS. Otherwise, you can turn off the computer, unplug the unit and make sure that the cable from the drive to the motherboard is sitting comfortably. Do the same for the power connector. If re-connect these cables does not help and the drive is still not detected in the BIOS, pull it out and test it in another computer. If he is not seen there, he died. If you can see here, test as described below. If the drive is detected in another computer and tests fine, then the connection of motherboard on the original computer is bad. According to the motherboard, you can sometimes put the HDD on another cable, but it is a sign that the motherboard is a failure. If the computer is old, it is usually not cost-effective to replace the motherboard.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• HP Pavilion notebook PC A7H25UA #ABC g6 hard disk failure

  Hello

  My laptop started with this error message: hard disk failure: Q0FAJ2 - 66 X 756-MFGK1F-60F803 and past Q0FAJ2-66X74H-MFGK1F - 60CT 03. I run the hard drive test and they both failed.

  What can I do to solve the problem?

  Thanks for help me!

  You'll have to replace the hard drive. It is not as difficult as you might think. If you can do this:

  http://www.YouTube.com/watch?v=3AlMZFGwegE

  post then back and let us know the country you live, and we can help you find the best price on a good replacement and will guide you through software and data recovery/reinstallation.

• Failures of start-up and recovery Dell XPS 8700

  The system is 2 years old.  No recovery image was never created.

  Here are the original symptoms.

  1. cannot start Windows 8.1 on Dell XPS 8700.
  2 OS refresh fails.
  3. OS restore points fail.
  4. OS auto repair fails.
  5 restart the failure of Options (Safe Mode, start Debug mode).
  6. command prompt fails (cannot find all administrator accounts).

  Done so far:

  Created a bootable flash drive. After changing the BIOS setting to boot using the USB key, first of all, the PC started successfully. Then, I was able to access the command prompt and save the user data files.

  Then, I went back into the BIOS and changed the boot order to the internal HARD drive. I rebooted and finally started a reset from the PC (factory restore). After the reset process has reached 4%, I got a reset failure message. A subsequent reboot then gave me an error message file BCD 0xc000000d "the BCD file is missing information". The next restart gave, I can best recall, 'no partition not found on the internal hard drives And I could see no longer the menu of UEFI, just the BIOS (A06) firmware. After change the order of boot and boot to the flash drive, I could see that a lot of files apparently had been marked for deletion on the C: drive as user profiles did not appear. At one point, the flash player had become the C: drive and HARD drive is X:. But which cleared up later. After getting the quick C: folder to the HARD drive, I published the following commands Bootrec /fixmbr and /fixboot, Bootrec scanos Bootrec rebuildbcd Bootrec. After trying to start once more on the internal HARD disk, I had another variant of the BCD file error, 0xc00000098 "the BCD file contains no valid information for the operating system".

  Any chance of recovery in this situation?  Otherwise, I guess we will have to get a replacement drive (that is, SSD) and a copy of Windows 10.   Thank you.

  Hi 2Tallinva,

  Yes, that sounds like a hard disk failure. You can try this site to download a disc Windows 8.1. Of course, a free update to win 10 is better than paying for an OS you already entitled to.

• Imminent disk failure toshiba mk6465gsx ata device - utility?

  My laptop DV6 gives sudden message that there is an imminent disk failure.    Recently saved.  Reading on a support page that could be a problem with the CHIP.    Article says to download the Seagate utility, but it is a Toshiba drive I have.

  I don't see a similar utility from Toshiba on this site.

  Any advice?

  I tried to restart;  had problems to do this (told me to reload the operating system on the 'black' screen).  If turned off the coast during the night and started well the next day, but still give the warning of Imminent failure (which I've since turned it off).

  The hard drive is about to fail completely and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  If you need help with selection and replace of the disk station hard back with model number & full product as indicated on the Service tag on the bottom of the laptop.

  How can I find my model number or product number

• Product key is not valid after a disk failure

  I had Windows 7 on a computer that had a disk failure.  I replaced drive you and trying to activate Windows 7 on my new system, but he said that the product key is not valid.  I entered it several times, same result.  Since I'm not on the previously installed Windows 7 (Home Premium) because the disc is dead, is - it possible to do this work key to activate Windows 7 on my new hardware?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How ASM manages disk failure

  Hello

  Would by document Oracle ASM and stumbled on this subject need to shed some light on this please.

  "Disks are first taken offline and then automatically deleted. In this case, the disk group remains mounted and fit for service. In addition, due to mirroring, all data from disk is accessible. After the decline of disk, Oracle ASM operation performs a rebalancing to restore full redundancy of data on defective discs".".   -What it means?

  Thank you

  Redundancy of the DSO is basic ability and not founded as RAID 1 mirror disk. ASM does not duplicate records. When a drive is removed due to a permanent failure, ASM will begin to rebalance and copy data that is necessary to maintain the data redundancy on the remaining disks within a group of disk failure. It will also attempt to evenly distribute the data on multiple devices.

• FRM-92101: there was a failure when starting Server Forms... (R12 charge installation on windows server 2008 32-bit)

  Hello

  I encountered the following error when I try to open the form in oracle EBS R12.1.1

  It stuck for a little while and then appears an error message

  FRM-92101: there was a failure when starting Server Forms...

  (I've never been able to run the form on this)

  I ran a vision online forum that works very well which means java is ok.

  It is the new installation on windows server 2008 32-bit with costs of database (no vision).

  I search on the internet and tested all of the available options, including;

  change in the registry for example 1024,12288,1024 etc.

  marking the check box for oracle process manager to PROD "allow service to interact with desktop".

  check the configuration files of forms (all files of any bad path that I found and corrected)

  running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log

  I'm not a technical professional and unable to solve the problem, please help

  Problem solved

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Windows 7 Ult has suddenly and bad start showing a message "non-genuine copy".

  Since I used it last there two days, my copy of Windows 7 Ultimate has suddenly and bad start showing a message "not real".  Enter the correct product key Activation menu causes the message that Microsoft has blocked this key.  It's infuriating and totally unfair!  No explanation?

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  In addition, if you were using a pre-release version of Windows 7 Service Pack 1, your license status can change in non-genuine. You must uninstall the beta or RC, and then install the final version:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1

  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

• My computer keeps showing disk failure smart error

  My computer keeps showing on the startup splash screen and also my system completely stopped backups from disk failure smart error

  and my DVD/CD ROM burner a work stoppage indicating the red light on my bright area of the lens. and has same stop indicator to the area of manerg of tasks

  The error means that the hard drive is faulty and should be replaced by a new.

• I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for?

  I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for on my new drive?

  Install the application of cc on your new hard drive desktop, https://creative.adobe.com/products/creative-cloud and use it to install your programs of cc.

  [moved from the download, installation, commissioning creative cloud download &install]