single-sided pcb

Similar Questions

• OKI C5400dn will only print single sided

  I have windows 7 pro. I have an Okidata C5400dn (not C5400, not C5400n) the "d" in "dn" means duplexer (both sides), connected via a network (tcp/ip).  I can print single sided, but how do I

  (a) 'activate' duplex printing from windows 7 driver Okidata C5400n?

  (b) ' print' the landscape, "long edge first.

  (c) ' print' portrait, 'first short edge'

  OK, by trial and error, including the following. To "activate" duplexer on okidata c5400n driver, you must;

  1. [Start]; [devices and printers]
  2. under [Printers and faxes] right-click [Oki C5400n]
  3. [Printer Properties]
  4. [ settingsof thedevice ] tab
  5. under [installation options]
  6. change "double-sided:" to "installed".
  7. [apply] [ok]
  8. now the option "print on both sides" will appear in the print Preferences dialog box

• Get the "layer break" error message when you try to preview a DVD single sided, or build a disk folder or ISO image

  Hello!  Hoping someone may be able to help with a strange problem.  I have not found anything in the forums or on the web that match my symptoms.

  I use Encore CS6 (v6.0.1.013) on a MacBook to the retina year last to create successfully a number of single-sided DVD with menus, chapters and all that.  I usually make a copy of a previous project to DVD, then replace the video media with the new files and transcodes them, move and rename chapter markers and rework the menus in Photoshop.  I will then build the ISO images to DVD and Blu - Ray (both single-sided) and use them to burn multiple copies of each DVD for customers.

  This week, all by developing one of these projects, trying to create an ISO from DVD image that looked like it would take on a 4.7 GB DVD, I received the message "layer break" ("the chosen layer break does not double layer requirements.  To resolve this problem, set a new layer break manually or choose to automatically set the layer break. ") because (I guess) the material was too long for the 4.7 GB DVD (generation screen now shows approximately 5 GB of material are in the project).  This is the first time I've seen this message - usually just tells me that the material is too big for the DVD.

  I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), returned and replaced the files transcoded, and now the generation of DVD screen shows that there are approximately 700 MB of free space on a 4.7 GB DVD.  But I have not yet able to build any version of the DVD (image, folder, drive), without the message 'layer break '.  I also now get this message of breaking down even trying any menu, killing my ability to get a preview of the DVD menus in Encore to "Preview from Here".

  Just to see what would happen, I chose a 8.4 GB double layer DVD and selected 'manual' instead of 'auto' for the selection of layer break, but never had the Selection dialog box of a break layer, just the error message "layer break".

  Usually, I build images DVD and Blu - Ray with the same material in the same project.  I use different transcoding settings for each, and I was able to build an ISO from Blu - Ray without this "layer break" error on the Blu - Ray version (which is about 24.5 GB when built).  And as I mentioned earlier, this is the first project where I saw this message of layer break.

  Any suggestions would be greatly appreciated!  I would rather not to recreate the project from scratch, but I'm worried that I might have to.

  Thank you

  Jon

  Thanks for the quick response!  My problem is that I don't want to make a record double layer - it's a single layer 4.7 GB max project (currently at about 3.5 GB, after removing the extras timeline and asset to see what it might do).  And even when creating a file, I get the error message "layer break", so I couldn't use ImgBurn if I wanted to.

  Thanks for the links - I had seen a lot of them before, but missed a comment from someone, which means that once a layer break set in yet, it cannot be changed.  It makes me wonder if, once again goes in the way of thinking that a rupture of the layer is required, there is no way to disable this behavior.  Has anyone seen this behavior?

  I think my only option at this point is to rebuild the project from scratch, following Neil Wilkes strategy for the command to add assets (I had not paid much attention information previously).  Suggestions are always welcome, however!

• Single-sided transition

  Maybe I'm being dense, but I was wondering if there was a way to apply a default transition to one title CG as a single transition face?  I know that you can select two adjacent elements and use the keyboard shortcut to apply the transition between them, but one thing miss me my Avid Liquid system was to leave you with a hit apply a transition to the chosen location, not only between the clips.  This allowed me to place a CG clip on the timeline, move the pointer to the front of the tape on a key clamp, dropping a transition in and then move the pointer towards the back of the clip and press picking up the handset a transition.

  I know that I can grasp the transition between the folder and drag it where I want, but it is much faster to simply select/click/apply.  When I'm working on a project with hundreds of CG titles solvent on and apart from saving a few seconds on each one adds up.  Unfortunately I have not dissolve it clips CG to another to another.

  I suppose that the graph is on a clean video track and it is not butted to the other...

  Target this track.  PG Up or Dn for the departure of the graphic element.

  CTRL-D applies to the default transition.

  He will be alone if the graphic clip is not butted to the other.  (as Jim said)

  If a chained is the default transition... This will be a fade at the beginning of the clip and melted on to the end.

• If I can force a document to be printed single-sided?

  Hi all

  I have a form which is downloaded by customers and MUST be printed on the front only, or it causes all sorts of problems. Is it possible in Acrobat to pre-set some print settings or configuration of the page?

  See you soon

  David

  You can set a document given by default for two printing by going to Document properties, go to the tab advanced, and then under Presets dialog box print, affecting DuplexMode Simplex. Then press OK, then save the document.

  Note that this does not restrict the user to change the setting in the duplex print dialogue box if their printer supports duplex printing.

  -Dov

• Adding coverage to a single sided document

  Hello

  I created a document unique face that will be sent to the printers to be spiral. I would like to the last page of the blank document, but the reverse of the to be a back coat of the content about it.

  Can someone tell me please how to do this, then it is clear to the printer it is a back cover and not only the last page if that makes sense? Sorry that I can't think of another way to describe it! I searched the forum and couldn't find the answer.

  Thanks in advance for any help!

  Simon

  Ask your printer you want and give a stapled-together model and electronic files.

• Choose the single chapter or chapters - disk space?

  Hi Gang

  I use iLife 08 - iDVD 08 and responsible for some older models as well. I have a 95 minutes, (burn single face) piece, which looks nice using the 'professional framework. Currently its a long chapter about 95 minutes long.

  I know I can break up the longest play in several chapters of void and put them on the menu, (it is no problem). What worries me is if I have enough disk space, (keep a burn single sided), to include 'Play a whole movie', in addition to including the sup chapters? If its mathematically adding the length of the total room for smaller pieces, no I don't think that will work? It seems, the total length will become prohibitive for a burn single sided. And BTW, all movie clips are exported "referenced files" and not "independent".

  By keeping the side burn 'one' (duration: 95 minutes), I think my options are:

  Stay with a long piece, or use 'DVD Studio Pro' which would require some time long tutorial...

  Any other ideas?

  Thank you!

  Where the 95 minute clip of?

  You can add chapter markers to a given interval with iDVD, i.e. at intervals of 5 or 10 minutes to your current project without having to exceed the 95 minute playing time available to you.

  1 - Select the movie from the main menu

  

  2 - Select the menu option Advanced ➙ create markers chapter for the film .

  

  3 - Select the time interval for the chapters.

  

  4. double click the movie button in the main menu to get this submenu:

  

  5. double click on the scene selection button to get the chapters:

  

  The downside to this is that you can choose a time interval and not a specific point in the movie for the marker.

  Otherwise, import the movie into iMovie or some film editing app that you use and add the markers where you want there.

  

• On a Pro 8600, how can I switch between the simple side and double-sided printing?

  I looked at the response to the more than 8600 pro, but when I go to print-preference-advance, I don't see the option of switching between duplex and single-sided.

  In the set printing preferences 'print both sides' votes to zero.

  

• HP 8630 OfficeJet Pro print double-sided on legal size paper

  I just bought a HP OfficeJet Pro 8630 can I print successfully on each Board standard size paper and print on legal paper (from each drawer).  I can print one side, but the driver seems not to allow the duplex legal communication.

  I tried in all stores (I have read on the set 2 only for plain paper, but as I understand it, which applies only to the brilliant vs plain and not of different paper sizes).  In any case, I put my legal paper in Tray 1 and set tray on shift, and the default for tray 2, which seems that it will be a good idea in the future, when we use envelopes, etc.

  But...  The problem that I'm having it is when I go to the printer properties dialog box, if I use duplex printing either on the long edge or short, the legal (and most other choices for paper sizes) have a yellow/triangle exclamation point icon and if I ignore the warning to resolve differences, which either don't let me out of the modal dialog box , or it will just print single-sided anyway.

  I can't find someone else complain that duplex printing legal size does not work, it seems as it should be, but I am at a loss of the configuration of the printer to make it work.  Any ideas?  Success stories?

  I use the latest firmware (FDP1CN1416AR, patch, version 0) and the driver (just downloaded, can't figure out how to get the actual number of installed version)

  Thank you.

  Hello

  The duplex accessory does not support Legal paper size, it is an expected behavior.

  You can perform manual duplex printing using Pages of print options to print the odd pages only, then replace the printed sheets and send other pages even only... the Pages of print options print job is under print options > Layout > advanced.

  You can find the printer specifications below, check the duplexer column according to the specifications of paper output > paper sizes supported:

  http://support.HP.com/us-en/document/c04085902

  Shlomi

• IPad 3 show two-sided

  My pc will be printed double-sided hp photosmart 5515 but my iPad 3 wil only print single-sided. If two sided is selected on the iPad it does not print. Any ideas please?

  Hope you are doing well and sorry that you are having this problem.

  What application you use to print from the Ipad 3?

  Have you tried HP ePrint home & Biz  I personally I like airprint more that Apple is a good app

  I'll do my best to help you, if you need help

  Best regards;

  RobertoR

• Print double-sided for Deskjet F4280

  Hello

  I m not able to print double-sided for my Deskjet F4280 printer on my mac only. I can do it on PC, but not Mac because it is disabled. I need help because I use my Mac laptop daily, and it of a complete waste of paper and money and is too heavy to carry paper that is printed single-sided.

  Thank you

  Hello

  Manual duplex printing from a Mac running is different from how it works on Windows PC.

  Please follow the steps below to perform the required task.

  An option to perform manual duplex printing is to use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Thus, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• DeskJet 3520 problem PDF print double sided

  have a brand new HP Pavilion with deskjet 3520 computer.  and windows 8.

  duplex printing on the deskjet printer test, found stall to halfway through printing.  support got me to download the new firmware for the printer, and then it works better. \

  multi-page prints word documents double-sided without problem. but the PDF documents will not print entirely double-sided.

  Gets to halfway through and hold; research in the print spooler, shows ' printing... error.

  tried foxit and adobe, same result.  both printing single-sided without problem.

  someone at - it any help?

  Thank you

  Vern

  I solved the problem myself by plugging the USB directly to the computer rather than an extension. \

  Thanks for your interest,

  Vern

• HP laserjet 3390 does not Win 8-sided print

  I want to install a new computer HP Envy Phoenix 800 with Windows 8.  I am trying to install a printer HP 3990.  I can get it to print single sided, but it won't allow properties to select double print side and the scanner does not work.  Other features of properties are not available.  I downloaded new drivers from Microsoft, but the printer will not work correctly when it is connected via a USB port.

  Thank you.

  Ken

  Hi Kenneth,

  You can try to uninstall completely to reinstall the drivers for the HP LaserJet 3390 model from this link and check if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1140788&TaskID=135&prodTypeId=18972&prodSeriesId=1140785&lang=en&cc=us

  See the exact steps in this link and check if that helps:

  HP LaserJet printers, multifunction and all-one - install the driver included in Windows 8 or Windows Update

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c03470332

  Also, follow the steps in this Microsoft article troubleshooting and check if that helps:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Double-sided printing OK except page 1

  My Brother MFC-J470DW print double-sided PDF OK EXCEPT the first page comes out in single-sided. Page 2 at the end it is double-sided. How can I get all THE double-sided pages?

  Hi sdsBrooklyn,

  Are you trying to print two-sided sided printing | Adobe Acrobat, Reader or a booklet print Print booklets | Adobe Acrobat, Reader?

  Please refer to the parameters.

  Kind regards

  Meenakshi

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!