Size of files of different formats help

Similar Questions

• Toshiba 20 GB F series - how to change the files in mp3 format?

  Hello :)

  This is my first post here. I had + Toshiba 20 Gb F series + more than 4 years. Recently, he acted weird directional buttons were not answer and I decided to back up all my files. So I made a copy of what I had on my Gigabeat on the hard drive. My GB died 2 days a go (rip) and I tried to listen to my music on the hard disk, but windows does not recognize the format.

  So my question is how can I change the format of the files to * Mp3 *? I asked this question in other advice and they told me to post it here because you are more familiar with this problem. If you know the answer please can you me a step by step instruction? As this program, I need to use and etc.

  Any help is greatly appreciated!

  > I asked this question in other advice and they told me to post it here, because you're more familiar with this problem.
  First of all here in the forum you can meet the same guys in other forums ;)
  Only difference is that here are more Toshiba laptop owners as in other forums :)
  But I put t know why we should be familiar with this issue?  :|

  In any case to be honest I don't understand what the problem is.
  I mean you made a backup of your files (what?), and now you want to convert to MP3?

  Usually if you want to convert audio files to mp3 then you will need to use a special tool.
  In internet, you will find a large number of different tools that are able to convert audio files in different formats

  Just google for these free tools.

• Need help to export files in Jpeg format for printing

  I'm quite new to this, so any help would be appreciated. I use Lightroom 3 and need to export files in Jpeg format to put on Smugmug for printing. My understanding is that I put 300 PPI, in measuring the "size to fit" and the width and the height, I'm a bit confused. I'm trying to find my size of the original file that I can't find if I can put it in the right dimensions for export. My problem is that I want to export by batch and I need a way where I can export there will be minimum smugmug in culture when people are going to buy prints. I'm looking for the best image quality for printing without losing parts of the image due to the size of the file. Thank you very much!

  The size of the image are in the metadata Panel of the library Module.

  If you want to allow people of the same image to print sizes, then they will have to crop the image to the right size on Smugmug. There is no way to avoid it. I know that you said you don't want to crop the images, people, but users MUST make a crop so that the image has the same proportions as the print size.

  Similarly, if you want to allow people to print 4 x 6 or 11 x 17 or any other standard size, then you must provide as many pixels as possible. You can not, to your computer in Lightroom, choose settings that match all of these possibilities.

  So, again, I recommend that you download the whole photo, without culture and without resizing to the default PPP. Nothing else will not provide the end user the flexibility to print in different sizes.

• FTP adapter to query multiple files (different formats)

  Hello
  
  We have a requirement of survey and treat multiple files from a FTP location (either treat all or refuse-reject if there is no failure in one of the files).
  Functioning of the FTP Get File (Opaque schema) adapter, we are able to read three different file formats and can get the name of the file (FileName variable use of header).
  
  And we hope to process the contents of the file based on the name of the file we get from the above step.
  
  (1) how to convert the contents of the Opaque file to the specific schema (ex: file1.csv file2.csv and file3.csv with different formats)?
  (2) given that the requirement must treat all files at the same time, can we use correlation in the poller process to route to the simple controller process (an instance of the process controller for all files)?
  
  
  Any help would be appreciated.
  
  
  
  Thank you...

  Hello

  If you choose that one branch will be triggered at any time... to process all files in a single instance of u may have to use sync operation in the file adapter for the rest of 2 files of reading and the instance will be triggered by the adpater file first read operation.

• What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated.

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems. Apparently, it is not possible to do it without formatting. I am curious about a way to do this without destroying the drive.

  Thanks in advance.

  Eguy

  Tuesday, October 9, 2012 16:55:51 + 0000, Eguy wrote:

  What is FAT, FAT32 & NTFS maximum file size of file systems supported? File system of all the methods of the passage of FAT & FAT32 to NTFS without formatting is appreciated. (IE without deleting the files from a particular disk).

  Difference between material FAT & FAT32?

  First, note that there are three varieties of FAT: FAT12, FAT16, and
  FAT32. Many people call just FAT16 FAT, because before that FAT32 is out.
  FAT16 is the only variety used for hard drives, so just
  The FAT was not enough.

  FAT12 (hardly any more used) had a maximum volume size of 12 MB.
  It has been used almost exclusively for floppy disks.

  FAT16 was used on hard disks (or partitions) up to 4 GB and had a
  cluster size which varied from 2 KB to 64 KB, depending on the size of
  the partition. It serves almost never again, because almost nobody does
  a as small as 4 GB partitions.

  FAT32 FAT16 succeeded and has a maximum drive size of 2 TB. His
  maximum file size is 4 GB, which explains why you can't copy a file of 5 GB to
  it. its cluster size is 4 KB up to an 8 GB partition. Beyond 8 GB the
  cluster size develops up to 32 KB.
  NTFS, that's what almost everyone should use on their hard drives
  today. Its maximum volume size is 2 ^ ^ 64-1 and its maximum file size
  16 × 1024 is ^ ^ 6 bytes (much more than the bigger hard drive available
  today). Cluster size is 4 KB, regardless of the size of the volume.

  I have a disk full of files, and it is in the FAT32 file system. As I can't copy large files (5 GB +) in this player, I intend to fix this by changing the file systems.

  Good! You should.

  Apparently, it is not possible to do it without formatting.

  It's not correct. To convert to NTFS, use you the CONVERT
  command. But first read http://www.aumha.org/a/ntfscvt.htm , because
  There is an important question about the size of cluster that is not obvious.

  Also note that conversion is an important step, touching everything on your
  drive. When you take a big step, no matter how unlikely it is
  always possible that something can go wrong. For this reason, there
  careful to make sure that you have a backup of everything you can not afford to
  lose before you start.

  Ken Blake, Microsoft MVP

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• How to compress a lot of pdf files in different sizes for a specific purpose (20 MB)

  Hello

  How to compress a lot of pdf files in different sizes (21-39 MB) to a target specific (20 MB)?

  Thanks :)

  Of endless trial and error.

• Action to open and save multiple files in a different format

  Photoshop CS5

  TC 3

  I did not use its actions before.

  I want to open all files in a folder from one format and save them to a different format.

  How this is done?

  Thank you

  Rob

  Assuming that you all have a format and want to just open all the files and save them under a different format, without changing anything...

  A way, using Photoshop and measures and automation, would be to define an action that was simply a file - open and file - record under in a separate file.

  To set an action, in the ACTIONS Panel, create a new set and a new action, and then just save the steps on an existing file. Once this is done, click on the stop button.

  Once this simple action was defined, allows file - Automate - lot... configured to perform the action on the totality of a folder full of files.

  You probably want to use the options [] Override Action "Open" Commands and [of] Override Action "Save as" commands .  This option allows you to do things like specify the JPEG save quality in action and will not be prompted to do it every time.

  Your batch processing dialog box may look like this:

  

  -Christmas

• Help! Convert legal size pdf file letter size?

  You need HELP!

  I have Adobe Acrobat 7.0 Professuonal.

  How I can convert the legal size pdf file letter size?

  All information should be same as the legal size, I just need to reduce its size to letter-size.

  Thank you.

  In regards to printing to the Adobe PDF printer, DO NOT check printing for the file. The printer should take care of this. If you print to a file, you print to PS (NOT PDF) file which will then be opened in Distiller to create the PDF file. I mentioned, maybe it's not the easiest way, but it does the job for what you wanted.

• Export to different formats

  Hi all

  I'm pretty new to first, and now the client wonder for the different formats of a video (don't ask me why all these are necessary):

  .wmv

  .avi

  .mov

  . MP4

  . MP4 (youtube)

  . MP4 (widescreen)

  . MP4 (Web site)

  The project is implemented in first, so I thought it would be as easy as file > export > media and choose options.

  However, I found only the .mov, .mp4 and the .mp4 (youtube).

  I work in first CC 2015 on a Mac.

  Where are all the other options? Or did really pull this off?

  And no idea how I can even export these types of files?

  Thanks in advance for your time and your help.

  I'm working on the PC, but I do not think that you will be able to export .avi or .wmv (Windows Media) on a Mac, without third party software. The requested list seems a little ridiculous - for example, if they really need a .avi file, with codec, which plug? There is no "generic" avi file, because .avi is just a 'container' and a number of things can be on the inside!

  Regarding applications .mp4, look under "H.264" - those make out as .mp4 files. But even once, what SPECIFICATIONS are you looking for? Just say "Web site" is rather vague. They want 1920 x 1080 FullHD, something more small, what bitrate, etc.

  For me, they don't KNOW what they want and are just trying to cover all potential needs, without knowing what they are talking about perhaps.

  Download the client to be more specific, explain to them that their claims are too broad.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Playback of multiple files with different file extensions

  Hi all

  Is there a way where we can read multiple files with different file extensions using file adapter?

  
  
  < property name = value=".*\.csv"IncludeFiles"/ >
  

  Can include us a few models more file in the property above? Please let me know

  Yes you can. .

  But here, the thing you need to do is all these files must have the same format (XSD)

  You can dynamically pass the name of the file to invoke the activity of the file that is the property of jca.file.filename

  The value given when you set up the adapter will be written by this value. .

  Hope this will help you

  If this is not the case, let me know. .

  Thank you & best regards

  Sharath Kumar

• problem with importing the files in JPG format

  Hello, I have a problem with the import of files to JPG format. When I import the files, they are imported with different names but with the same image. How to solve it? It all started after the update.

  Open them in Photoshop and save it back.

  Import again.

  See if this will help.

• Renders TIFF and JPEG from the RAW files appear different as seen in Bridge

  I work with the demo of Photoshop CS6, with cab 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x 6 1090 t., 16 GB RAM, Win7 64 bit, nVidia GTX 460 video w/1 GB RAM, approx. 2.5 TB of free space on several internal physical disks, Canon 50 d, CR2 files. I have a camera profile generated by the profile editor, and the monitor is calibrated with i-to-1 Match.

  I practiced with the new basic Panel controls (2012 process). When I felt that I was getting the hang of them, I started to save JPEG and TIFF files and noticed differences between what appears in the bridge and ACR. I worked on it for a while and searched some other threads in the Forum that seemed to speak of similar results. I have now tried to Image Processor via the bridge, save the Image in ACR and open > save manually in PS CS6. By what route, the TIFF and JPEG are different (lighter in the following examples, but this isn't always the case), while the saved PSD seems to be close, but not identical to the CR2 in Bridge or Photoshop. Here is a screenshot of the bridge thumbnails that show the differences.

  

  I hope that the labels come out legibly. The two images on the second row are respectively of CR2 and PSD. What is really strange to me is that when I re-recorded the PSD file in TIFF format, the same type of difference appears in the TIFF format. (See the _MG_7960_via_PSD.tif above.) I downloaded the CR2, its XMP, TIFF and JPEG on Sendspace (107 MB) file. I did earlier in my experiences and regret that the naming of the files is not as informative as perhaps.

  http://www.sendspace.com/file/t0lhko

  I ran a few other ACR adjusted by images of CR2 Image Processor and saw a variety of differences between rendering files and the FIRST versions. The differences appear to be in the exposure and contrast. Most of them looked a bit darker, unlike the examples above.

  I'll happily give any other information on request. Thank you!

  Information on the system of Photoshop:

  Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: AMD CPU Family: 15, model: 10, Stepping: 0 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Physical processor count: 6

  Processor speed: 3511 MHz

  Built-in memory: 16382 MB

  Free memory: 13415 MB

  Memory available to Photoshop: 14766 MB

  Memory used by Photoshop: 71%

  Tile image size: 132K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer videocard: GeForce GTX 460/PCIe/SSE2

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 1200, right: 1920

  Video card: 1

  Graphics card: NVIDIA GeForce GTX 460

  OpenCL unavailable

  Driver version: 8.17.13.142

  Driver date: 20120515000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1920 x 1200 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GTX 460

  Memory: 1024 MB

  Texture size video Rect: 16384

  Serial number: Trial Version

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\Kieren\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  E:\, 770.4 G, 644.1 free G

  K:\, 931.5 G, 482,3 free G

  L:\, T, 854,4 G free 1.82

  H:\, 1.75 T, 505,2 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2012/01/18-15: 07: 40 66,492997 66.492997

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/02/09-16: 00: 02 4.0.93 66.496052

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 6.0.0.1654 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/01/18-15: 07: 40 66,492997 66.492997

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/01/18-15: 07:40 66,492997 66.492997

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/01/18-15: 07: 40 66,492997 66.492997

  BIBUtils.dll BIBUtils 2012/01/18-15: 07: 40 66,492997 66.492997

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.0.5.19287 2.0.5.19287

  CoolType.dll CoolType 2012/01/18-15: 07: 40 66,492997 66.492997

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0

  LogSession.dll LogSession 2.1.2.1640

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  SMA 3.11x01

  Angular Strokes 13.0

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.1

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Clouds of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  COLLADA 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Embed watermark 4.0

  Entropy 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Extrude 13.0

  FastCore routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 maximum (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Measure Core 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 median (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mezzotint 13.0

  Minimum 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Neon 13.0

  Paper notes 13.0

  NTSC colors 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photocopy 13.0

  Engine 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photo filter package 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Pinch 13.0

  Pixar 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Range 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  ScriptingSupport 13.0

  Shear 13.0

  Asymmetry 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Sumi-e 13.0

  Summons 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  U3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Draft of 13.0

  Vanishing point 13.0

  Variance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Variations of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  WIA support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Wind 13.0

  Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Zig - zag 13.0

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  You have the option to auto tone apply verified? I noticed and reported that a bridge bug is CS5, when your car is verified. It may still be around.

  IF prefs are designed to open jpef/TIFF image in ACR * IF * the files has ACR settings (aka a XMP file), * AND * auto tone has been verified * THEN * auto tone has been applied to the bridge thumbnails even if jpef/tiff did not ACR settings. Thumbnail/preview looks so different when opened in photoshop and others. The thumbnail has the auto tone and the opened file does not.

  -Norman

• Pole #1 PC Performance and RAM: quantity, average, maximum size of files Adobe

  Do a little research here regarding the performance of the PC and the main memory/RAM.

  If you all could estimate/Riddle the minimum and maximum amount of files Adobe program, as well as file sizes, by each program (Illustrator, Photoshop etc...) I drop the results into a spreadsheet and provided details to etc. (at least attempt, based on number/quantity of participants, if the top I'll provide statistics at the end).

  Also indicate what is the size of the file you usually launched and how many of them. These averages are expected to produce some very interesting/useful information.

  More people who best meet of course (unless this has been done or his stats there somewhere already).

  Since I work mostly in Illustrator, these are the files that I took to target when looking for my storage by specifying the .ai extension. (both bad operating system couldn't do the math).

  I specifically made the research by entering the generic asterisk before the file extension, for example: * .ai, then by specifying all storage locations (Windows, choose 'My Computer' etc., Mac do not know, I have one, just don't use it often so that if anyone would care to specify it).

  For windows, the status bar at the bottom of the window has provided total number of files. To get out of the category, I've just enlarged screen and first counted the number of files poster by scrolling the window. Then moved/positioned column size of file, you click this header to sort etc. from the bottom up, then began to scroll the window with a simple click of mouse (not by the arrows) and counted the pages for the file/category varies so thought to them.

  My results (rounded):

  Illustrator

  Total files: 900 +.

  Min. size: 3KB

  Maximum size: 300, 00KB (or 300 MB)

  Based on the results of research and my some quantities of products and file sizes, I created 5 file size categories:

  1-0-1, 000 KB(1MB)

  2 1, KB(1MB) - 2, KB(2MB) 000 000

  3 2, KB(2MB) - 10, 000 KB(10MB) 000

  4 10, 000 KB(10MB) - 50, 000 KB(50MB)

  5 200, 000 KB +.

  360 files in category 1

  300 cases in Cat. 2

  220 files Cat. 3

  30 files in Cat. 4

  5 files in Cat. 5

  * There are duplicates

  Average of Adobe programs and files of launched/open all day (or work them)

  Illustrator: 2-5 or 10 files a few cat. 3, 1 in category 5 to 300 000 KB

  Absolute maximum load

  Illustrator, launched with 2,300, 00 KB (300 MB) of files, maybe 5 Cat. 3 and 5 Cat. 4, 850 000 Ko charge total (850 MB)

  If someone elsehas another suggestion of structure for the post categories please, seemed to me these adapted my amount of files.

  The information in it would be very helpful/insightful with regard to material resources and system performance is affected. It will also be interesting to see how the Illustrator compares to Photshop (and other programs).

  I'll also post this in the forum of Photoshop.

  [I wonder why copy what hinders a message from one forum to another formatting, adding of additional places at random]

  THX

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  150 views, by a global forum, and they can be repeated without participation except one > interesting

  Perhaps 150 users were curious what kind of question can have been displayed on a stick (pole).

  Find "survey."

  JET