Size of the audio recording window

Similar Questions

• I am facing problem with playback of the audio recorded.

  Original title: sound recording problem

  Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.

  It is uniform everytime I try. What I am doing wrong?

  Rich

  [Moved from comments]

  Hello

  What version of the Windows operating system is installed on your computer?

  If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Hope the information is useful.

• Explore: Discover: Choose Details: Audio sample rate and the size of the Audio sample are not available in the list choose the details.

  With audio files (in particular the WAV), Audio sampling frequency and the size of the Audio sample are not the choices available in the list of details with Vista.  In earlier versions of Windows (2000 and XP) they were both selectable as details.  Is it possible to get these will appear under Vista?

  Vista - related audio details available:
  Album
  Album artist
  Bit depth
  Bitrate
  Duration
  Kind
  Year

  2000 / XP - audio related details are available:
  The album title
  Artist
  Audio sampling rate
  Audio sample size
  Bitrate
  Kind
  Title
  The track number
  Year

  FWIW, sampling frequencies are discussed in the Help window and how to (below).

  Reference: http://windowshelp.microsoft.com/Windows/en-US/Help/53adb4c7-d538-42f8-bb13-917379922afe1033.mspx

  Thank you!

  For the third part of the applications that perform many tasks, I usually discover www.tucows.com and www.download.com.  They have a wide variety of programs, and the trick is to put in the correct search terms to find what you are looking for.  Make sure you that your selection is compatible with Windows Vista and at tucows, try to pick one with 4 or 5 cows because they are the highest rated.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Select the audio recording device

  I have inspiron 1501 (a new replacement), with 32-bit amd anthlon, windows vista OS.

  My micro phone volume was very low, the person on the voice chat could not hear it. I tried to make it work properly, by mistake, I disabled the device for registration of the properties. now I don't know how to re - activate again. It gives the message that no audio device is installed. I think by the upgrade of a link to forums to dell than the old problem will be over, but I do not know where to install the audio recording device. I tried the installation of equipment as well, but did not work.

  laasa.

  
  

• How to limit the audio recording time?

  Hello

  I want to limit the audio recording time 60 seconds. How can this be achieved? I've seen a single method but its to set the size. Or is it possible to get new coding time during recording? Please help me!

  When you start recording start timer once it reaches 60secs... stop recording.

• How to increase the font size to the bridge using windows 7 and a k 4 monitor?  It seems that this problem has come up before, but there is no answer.

  How to increase the font size to the bridge using windows 7 and a k 4 monitor?  It seems that this problem has come up before, but there is no answer.

  For Windows, you can try this:

  Adobe App scaling on the screens to high-resolution (FIX) | Dan Antonielli

• Windows Dvd maker has left the audio recording

  Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?

  Hello

  Windows DVD maker has all the features as other programs.  I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.

  I use Roxio 2012 Pro to my video, burn them to DVD.

• Windows 7 - audio system sometimes works and sometimes doesn't. Soundcard Question. Issue of the audio recording. Poor sound quality from the speakers.

  I connect on - the work of sound system very well.  Media player works fine.  The next time I log on - no sound system.  Everything is plugged, convenience store finds no problems, Media player goes through all the steps and looks that don't worry, still no sound.  I have download a fix for the VIA recommended by Dell Driver.  I did, and it still has the same problem.  I can close, reconnect, and then the sound will work.  Sometimes I have to close and log on twice in a row so he can launch.

  Can someone point me in the right direction to solve this problem?  I am working on a Dell Inspiron 546 AMD Athlon II x 2 215 2.70 GHz and 64-bit with 400 GB of RAM.  I installed Windows 7 but when I dug deeper into the service code for this machine which found at some point in time he had installed Vista.  This could be the same Vista to Windows 7 problem audio, everyone seems to have?  I bought this Staples announced new with Windows 7 as operating system.

  I did research on all forums and responses and am unable to check if I have a "sound card".  I'm not used with the terminology so even if I follow the Microsoft instructions to find the right place to check and see, I do not understand what I see when I'm there.  It is said: ATI high definition Audio Device and VIA High Definition Audio.  Is this to say that I have a sound card or I should get it a?  If I buy a sound card will it fix my audio problem?

  Even though I had my audio problem fixed, I was disappointed by the sound quality of the speakers on this new system up to date.  My speakers on my old computer (which lasted from Windows 98) were by far superior in sound quality.  I don't understand why they sound so crappy and barely louder, and when you show the to they have a rattle for them.  I tried plugging my old speakers on my new computer, but nothing happens.  My new speakers have a Plug and a USB port.  I don't know what is... why goal can not use my 'old'?

  Finally, I want to record my vinyl on discs and need a great sound system.  Any advice?

  I removed all the ATI Audio as suggested.  The result in the short term is that the audio quality is improved.  I no longer hear the "crackling" when the sound is turned on.  I'll answer more if the issue of audio (works) continues to be a problem because the fix.  If you don't hear from me, then please consider the problem solved and my thanks to you.

• On the audio recording problems

  Hi all

  I have a problem with regard to save audio files in Labview.

  In my program, I acquire the audio signals of the soundcard of the PC constantly and save them in a queue. After that certain prerequisites are activated, these audio signals in the queue is stored in a .wav file. This program works well, except a problem, which is the time lag in this .wav file. For example, I save a sound segment for about 30 seconds, but after the backup, this .wav file is just 21 long s. It contains all of the original recorded segment, but the time axis is compressed, which sounds like played fast. I searched all day and could not find any information about it.

  These sounds record and save functions are part of a comprehensive program, and I'm sorry that I can't give a single vi on it. I add the numbers below and I hope it helps. I am also willing to provide any additional information.

  PS: I have reviewed the incompatibility caused by approximation of the "t0" (published in http://forums.ni.com/t5/LabVIEW/Time-mismatch-with-Sound-Input-Read-VI/td-p/1385404 ) and compensate for that during the savings phase. (see figure 2)

  Thank you very much for the help!

  

  

  Hi, Vans,

  Thank you for your response.

  For your questions.

  1. I'm using Labview 2011 sp1 on Windows 7/Xp. I tested the program on desktop computers and laptops. I don't know about the types of sound card, but given that this problem occurs on several different computers, I think that this is not the problem of sound cards.

  2. for the sound card sampling frequency, in fact I checked that. I read signals of waveform of the 'read.vi of sound entry' and the term 'dt' is equal to 1 on the sampling frequency. So I think that the sampling rate of the sound card is correct.

  In fact I have just solved this problem by myself, but the solution is pretty weird. I think there are two reasons that caused this problem.

  1. when I receive tones of "read.vi of sound input", I first save them in a queue. Once the acquisition is completed, I save all the signals in the queue to a .wav file. But I'm going to do to overcome the overlapping sound and the gap caused by the "t0" reconciliation, a waveform signal re - organize before saving it, as below. According to my knowledge, I think that this 'dt' in the resulting waveform (indicated by the arrow) must be the same as before, but in fact it is not, and it becomes 1.

  

  2. Thus, to solve the first problem, I manually change the term "dt" once again as below. After the change, I'm sure that the "dt" is back to the correct value. But then is the strange thing is I saved the same signal waveform in two different ways, using "his write.vi file" and "file its writing simple.vi" respectively. The first method is the one I have used before and it caused the problem I posted here. The second works. In my program, I put as 16 kHz, 16 bits/sample, and 1-channel sampling rate. The file .wav from the first method has a strange flow 705 bps and the wave from the second method file has the right bitrate which is 256 bits/s.

  

  I tested the program of hundreds of times and each time he acted like I described above. I don't know if anyone has ever faced the same problem as me, but I hope that my solution can be useful for others. And I also hope to be useful to improve your LabView products.

  Thank you for your time.

  Best regards

  Sun87

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• How can I display a chart illustrating the size of the historical record

  Once, I found a way one looking at a graph showing the historical record size up slowly and then down when I had a clear out. I really want to know how do this to new but can not find it anywhere or on any forum.

  I'm not familiar with any device like that in Windows.  In the past I used a program called WinDirStat which provides a Visual representation of the good folder sizes.

• Impossible to install the audio driver Windows XP Home for my Satellite A110

  Hello!

  I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
  I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
  The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
  to install the Realtek HD audio driver!

  So I don't know what to do, and I can't play the audio in my laptop!

  Please, help me!

  Before you start to install a driver available, please download and review the Instructions for installations.
  You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
  Have you installed the chipset utility first?

• The size of the print font Windows Mail

  All that print from Windows Mail comes in a size of 16 dpi. How can I reduce this? I have Vista Home Premium

  Thank you, but I got it fixed by getting the 3 latest Windows updates (which none seemed to relate to my problem).

• Cannot increase the size of the volume of windows

  Hello

  I increased the size of the volume in Dell EqualLogic Group Manager (GUI). On windows, I see that volume capacity is 200, but it does not increase the size of 200 GB. After scanning disk total size shows that only 100 and not any unallocated space available size. Is - this 2012 windows bug? don't know where to start troubleshooting. The server cluster connection is via iSCSI.

  I see unreserved space EqualLogic, but not in windows,

  Thank you

  Hello

  It * should * work, but it seems that perhaps services cluster prevents the operating system of new reading ability.  Could take a failover or even restart the cluster nodes so that it can see the new space.

  If you have the support of MS, it would be worth a call to them as well.

• How can I increase the size of the disk on Windows DVD maker?

  I have 240 min. discs, but it's only allowing me 150 minutes.

  Hello

   
  A DVD video is made based on time, not on the size of the file. If the length is too large, it does not fit on the DVD.
  As a general rule, a 4.7 GB DVD can hold an hour of high-quality video. According to the compression options in your authoring software this time may be increased.
   
  As you can see in the FAQ below. DVD Maker is supposed to burn up to 150 minutes on a DVD single layer.
   
  For more information, see the article below:
  DVD-video burning: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
   
  And the compression used, at least your video quality.
  But yes. You can buy double-layer - DVD DL DVD blank 8.5 GB of memory capacity. It also requires a DVD burner double layer. And I'm not positive that the DVD Maker will recognize a DVD DL.
   
  It will be useful.