HP laptop G60 - display screen (photos attached) problem

Similar Questions

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• 2010 HP Monitor: display screen HP 2010 problem

  Last night, I installed upgrading Windows 10 and everything was going well. When I turned on today, the monitor went berserk! The desktop icons are much larger than they were and seem to be crushed. I tried to change the resolution of the screen, but the HP site says that this monitor should be set to 1600 x 900... There is no option for this in Win10.

  Offered recommended setting is 1024 x 768 and there is no way (that I know of) to change the correct setting.

  I tried pressing the "Auto" button on the screen and it says it must adapt to the screen, but it makes no difference.

  When I checked the pilot apparently is aware, but there is a message under monitor properties 'Vents' saying 'device not migrated.

  Can anyone help?

  Thank you

  :-(

  Loretta

  OK... problem solved restart. How was I supposed to know that?

• How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

  Vista running on a Toshiba Satellite L500

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• How can size of display screen Touchpad adjustment - I disable this!

  I have a HP Pavilion A7A33UA laptop #ABA g7.  I want to keep the touchpad to change the display screen size.  Sometimes, when I am trying to move my cursor touchpad will be from my screen shrinking.  IT IS VERY FRUSTRATING.  Can I disable this feature without disabling the touchpad as a whole?

  Hello

  Please find the web site link below might help you solve your problem.

  The use and configuration of the touchpad

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Display screen is totally blank on my Tecra S1

  My TECRA S1 laptop display screen is totally blank, I can hear the windows startup and can connect an external monitor to the laptop and get a perfect display, but the computer screen is totally blank, can anyone help? Thank you!

  Hello

  If you have no problem with the external monitor it says it takes to display a malfunction.

  On this way, we can only speculate, but I assume that the display needs to be replaced.

• HP Elitebook 8470w/display screen does not

  Hello

  We have a 8470w (XT908UT) computer laptop Elitebook with the screen on the laptop does not.

  Do us get the display on an external monitor but not on the laptop to display itself.

  Check the display settings of the control panel and Device Manager, the external screen is present while the computer screen is not.

  We have unplugged every unnecessary internal element for display (same HDD, keyboard and trackpad)), problem persists

  We changed 2 motherboards, 2 screens and card 1 gfx. Still the same problem persists.

  Can anyone help?

  Thanks in advance.

  After some research in the service manual and hp partsurfer.

  It seems that we have received a gfx NVIDIA instead of one card

  Gfx ATI card. The service manual says its compatible but not. Partsufer mentions only the gfx ATI card when the laptop

  PartNumber is submitted.

  the display is now correct.

  hope this helps future display troubleshooting.

• MacBook Pro screen re-recurring problem.

  In November 2015, I got a replacement of the screen as my Mac anti-glare treatment wears.

  Just one month later, replaced screen got weak horizontal gray bands that goes further, from right to left, I got a replacement of the screen before the end of 2015.

  Now, the March 2016, I had some stripes of vertical pixels affected when I apply pressure on the screen. How can I fix?

  Just in case you are wondering this odd task between the two, it is the slider. I want to show that the screen has some problems with it, so I place my cursor here to show that this isn't where the screen ends.
  

  It is a hardware problem with no software solution.  It will require a replacement.

  You have not identified the EXACT MBP model you have and perhaps with the display problem, it could come under this replacement program.  Read this link.

  https://www.Apple.com/support/MacBookPro-videoissues/

  Ciao.

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• G60 - 228CA: unable to connect to the Linksys E2500 router with laptop G60

  Hello

  I hope someone can help because I've been through the forums and I will have no chance to solve my problem.  I bought a new router (Linksys E2500) and my laptop (G60 - 228 CA) HP can detect the router but just failed to connect to the internet.

  I tried to diagnose all the problems which have been proposed, but that did not help.  I restarted the router, nothing helps.  I tried to download and install a new driver to replace the old (Atheros AR5007 802. 11 b / g WiFi Adapter) but still had no luck.

  Really not sure where go from here so looking for help solve this problem.

  Thank you

  Hello:

  Verify that the driver you have installed is actually that of 2011.

  If not, go to the device, right click on the atheros wireless card, Manager select uninstall and if there is a box to uninstall driver for check, check.

  Reboot and try the driver I posted again.

  If the date and the driver version is what is indicated on the driver file, then unfortunately, I don't have any other suggestions for you to try.

• My laptop xp display Dim on current alternative and light on the battery! How reverse that?

  Original title: display dims

  My laptop xp display Dim on current alternative and light on the battery!  How reverse that?

  Hello KarenJudyOrdoyne,

  Thanks for the return of the response.  I've included the Dell Web site below for the latest drivers, firmware and BIOS updates.  I would like to confirm that you are the first on the updates.

  Dell support:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427825

  If you look in the support section, other users have reported this problem.  In some cases, replace the power supply cable has solved this problem and I show other update to the latest BIOS update and this has changed.

  Also, do you have the Dell Diagnostics on your computer?  This is usually installed by the manufacturer, but you can run a test to determine if there is a hardware problem.

  I hope this helps!

• When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: «Cannot find file C:\Windows\system32\rundll32.exe...» »

  Original title: rundll.exe error

  Hi all

  I have a problem with my file rundll.exe. When you change any personalsettings such as theme, display, screen saver or any of those things I get the warning: "cannot find C:\Windows\system32\rundll32.exe file. Check if you have entered the correct name, and then try again. "(Sorry for any incorrect translation. I have a Dutch version of Windows).

  Is there anyone who can help me with this problem? I searched on several forums, but no luck so far.
  If it helps, I have Windows Vista Home Premium 32 BIT

  Rgds,
  Robert

  Hi Robert,.

  You can try the following steps.

  1 put the CD ROM Windows XP disc in the CD-ROM drive.
  2. click on start and then click Run.
  3. type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
  4 restart the computer.

  Good luck Robert.