Skype does not detect the new webcam

Similar Questions

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• 15 - n010TX: my HP Pavilion does not detect the integrated webcam

  Mr President.

  I have an integrated webcam which worked perfectly until recently. My laptop came with Windows 8 in 2013, and I upgraded to 8.1 Windows. However, now my computer is not able to detect the integrated webcam. I know that it's a software problem, because the material could not have been damaged.

  I tried to install software youCam"with the help of the HP Recovery Manager, and it was installed successfully. However, when I open YouCam, it does, "no available camera detected. Please check if the camera is connected and try again. Even Device Manager has no other choice "imaging devices". I guess that something disabled the webcam, and for some reason, no driver is able to turn it back on

  I need to get this camera working. My product name/number is 15-n010TX. Please let me know what I can do...

  Thank you

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

  Customer self repair library

  http://h20464.www2.HP.com/index.html

• Spectrum XT Touchsmart 15-1410n: does not detect the new hard drive

  After the upgrade to Windows 10 my hard drive divided into 9 different partitions, and most of them have been corrupted and I couldn't save it. I bought a new hard drive (HGST Travelstar 7K 1000) and replaced my old drive. I used a USB stick to boot and install Ubuntu 14.04 detected but only a 32GB Samsung drive and not my HGST 1 TB drive. How can I fix it? I would like to be able to access my new drive. Google says to mess with the SATA controller, but I can't do it in my BIOS. Any suggestions?

  You are not it is hidden. In my view, that Magical Jelly Bean can pull the Code out of the BIOS license once Windows is installed, but if you reinstall the same OS (Windows 8, correct version) it will be ignited automatically the first time that you connect to the internet.

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• I have a logitech zoom webcam and also skyoe, Skype does not recognize the web cam and I get an error box, why?

  My webcam logitech research... I see myself but when my family made a video call to me I can't see them and they can't see me, but I can speak for them. We have all webcams and their work with another family member, but mine does not. Why Skype does not detect my webcam?

  POgrady,

  Hello and thanks for your message.  You mention that your webcam works, but the problem is with Skype.  Most likely, you will need get the appropriate Skype settings.  I've linked the support page for Skype so that you can ask them on the required parameters, etc.
  https://support.Skype.com/
  Please let us know if this information did or didn't help you get your problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Lenovo Windows B590 8.1 tha camera works, but Skype does not detect

  Dear all,

  I'm new to the forum, where as a lurker I already found useful solutions in permeable opportunities. My technical knowledge, by the way, is very modest...

  It happens that my camera works fine on the laptop (a Lenovo B590 running Windows 8.1), allowing me to make videos, but when I installed Skype it does not detect the camera and asked me to 'connect to a camera'... so now I can't do videocalls using Skype.

  Before trying the remedy proposed in this post https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-B590-Webcam-problem/m-p/1572836#... I wanted to ask if he could adapt to my situation or not.

  Concerning

  Tony

  Hi Cruver solid,

  This morning, I tried to run the software proposed in another post, one related to my question. He solved the problem: everything works fine now.

  Thanks to you and your colleagues

  Tony

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Firefox 4 beta1 does not show the new user interface

  Firefox 4 beta1 does not show the new UI (not Firefox Button on the left). It is exactly the same as FF 3.6.8 under the tabs on the top function. Also, if I disable the menu bar, UI GET screwed up

  This has happened

  Each time Firefox opened

  Nevermind, I fixed it.
  It seems that, for some reason, the default theme has been disabled (?) for the installation of 4 FF, and everything looked weird and wise as I mentioned in the original post.
  On a side note, next to the default theme, once I activated, it reads "not compatible with FF4.

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.