SL400 BIOS Downgrade? Laptop will not disable correctly.

Similar Questions

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• "Notification Dll has not been registered, program will not work correctly.

  Dell Inspiron 2200 windows configuration error "Notification dll has not been registered, program will not work correctly.

  I checked several sites to try to fix this error without success. I have uninstalled, reinstalled, tried an older driver.

  go into system and con +, with no luck at the moment. Ksperov is installed where an antivirus trying something here now, doubt it will work. I noticed that many people have had this error, but I have seen almost nothing that corrected the error?

  With all the Dell laptops out there, someone has fixed it now. Also I tried to record a certain dll with no luck.

  I can't find a dll that is labeld notification.dll?

  The wireless works, but it is worsening.

  Thanks, Bruce

  Hey Brucefl,

  Try to restart in a clean boot to see if this error message is caused by a third-party program/startup process. To do this, follow the steps in this troubleshooting guide:
  How to configure Windows XP to start in a "clean boot" State

  If the restart in a clean boot prevents the problem to appear, take a look at the list of programs and services (do not forget to check her hide all Microsoft services box on the Services tab) tab of msconfig. Try disabling the programs and services to see if you can isolate what programs and services is causing this error message to occur.

  Hope that helps, I look forward to hearing from you.

• Satellite M40X: After update Bios keyboard keys do not work correctly

  I have a Satellite M40X and I had updated the Bios to v 1.60. and now the keys u, m, 7 and the up arrow will not work correctly. The problem is that there is not another version of Bios to use.

  How can I solve my problem?
  Can I get the old version of the bios?

  Thank you
  Gabriel

  Hello

  No won´t you be able to recover the old BIOS. The only two options are:

  1. try to update BIOS and check if it work s
  2. in the case of no success, please visit the [ASP Locator | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and ask them for a checkup of material and repair.

  Welcome them

• HP F023WM: My HP laptop will not load after, log.

  My HP laptop will not load after login

  Lights well, once I connect it just shows a black screen with cursor.

  Help, please

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• laptop will not print, the problem is PRINTUI. Missing DLL

  Hello. My computer Windows XP laptop will not print, and I found that the problem is PRINTUI. DLL is missing. I have a backup file on my hard drive, but I don't know which folder the file goes to. I have Windows XP Home edition SP2. Does anyone know the correct folder, that this file will?

  Hi, Jtmcc,

  Adding printers without interaction from the user in Windows

  http://support.Microsoft.com/kb/189105

  Is the common path: C:\ System32\ printui.dll WINDOWS\

  What is printui.dll?

  http://DLL.ParetoLogic.com/detail.php/printui

• My ACER laptop will not start Vista

  My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to reinstall Vista on an Acer:

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• My HP laptop will not wireless networks resume. I have an ethernet cable plugged in to get internet.

  I tried to install a network and it will not be the wireless networks list when he worked later than yesterday. My wireless works well because I have other connected devices work correctly. This computer just stopped to pick up the wireless network.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to check if the wireless on the laptop HP switch is turned on. If the wireless switch is off of your laptop will not pick up and wireless networks.

  Method 2
  I suggest you try all the steps from the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also: Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• my laptop will not import my photos and my itunes doesn't sync new music

  I'm not sure that the question is my Iphone 5 or the laptop. When I plug my phone both the laptop and the phone between them pick up and my phone syncs automatically, however, my phone always wonder if I want to import new photos and then once I clicked on Yes, it says that no pictures are available. Also when you try to import pictures on an app on the phone, he could not pick up one of my recent photos.

  As well as what I downloaded some new music on my itunes on my laptop, however, given that I brought music apple songs downloaded on my itunes on my laptop will not sync and I don't know why. The phone syncs and always put my new music on the phone when it syncs, but it's their import is no longer automatically.

  Thanks for any help in advance.

  You can copy photos manually from the film. It might sound like a somewhat random Folders collection.

  With Apple active any music that you add to your library becomes automatically available for you to download or listen to on your device. Music sync via USB, however.

  TT2

• Laptop will not start. A run Memory Test-got of startup failure ID:U0F323 - 66F722-9XNK1G-406 K 03

  Laptop will not start. Ran startup Memory Test-am failure

  Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.

  Product ID: B8M97PA #UUF

  MEMORY MODULE

  Window7 as operating system

  Any help would be much appreciated!

  Hello

  Try the following.

  First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.

  If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.

  Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.

  The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.

  Kind regards

  DP - K

• I tunes will not install correctly

  I tunes will not install correctly

  Hi vincentgivens,

  1. What is the version of windows installed on the computer?

  2. what happens when you try to install ITunes on the computer?

  See below the link to the Apple website and check if it helps.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/ht1926

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my laptop will not be closed. I have xp proffessional__

  my laptop will not be closed. I have xp proffessional OS

  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

  Utilities for Windows XP stops
  http://aumha.org/win5/a/shtdwnxp.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.