Sleep on computer problem; Generic USB hub

My computer has had trouble sleeping, and this time I was able to find something in the event viewer, directly related to it. Sometimes the computer goes to sleep, sometimes it will not, often times possible to sleep for a few seconds then wake up to the top.

Event Viewer, said ' Wake Source device: Generic USB hub»

Note, that there is no hub USB connected to my computer. There are hanging things that are USB, certainly including my printer, external hard drive, which are both off the coast. There's also the keyboard, optical mouse and speakers, this is it.

Any thoughts? Perhaps one of the USB ports is the cause.

2 other computer tech says sleep disorders are usually caused by the RAM or RAM from port problems.

Well, please follow the link I provided and read the articles for this search. You must go through all the devices in the Device Manager and check the relevant settings. It is clearly your USB Hub (integrated is a hub, too) that it prevents to go to sleep.

Tags: Windows

Similar Questions

  • Problem with USB HUB using Windows 7 on Bootcamp

    I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

    Hello

    I suggest you to see link and check.

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    I also suggest you to contact the apple support and check.

    http://www.Apple.com/support/

  • Satellite 5005-S504 need generic USB hub driver

    Hello

    I'm looking for the driver for the USB devide with the following details:
    * ' USB Device '.
    * VID (Vendor ID) 0930 (== TOshiba)
    * Product ID = 0400

    I am running windows XP. While trying to install a printer, I had to update the usb driver, which has caused all my usb ports stop working. After that, I uninstalled the USB drivers for windows to reinstall uppon reboot, but it did not. As a result, none of my USB ports are currently working, and I have a USB device not recognized in Device Manager

    A friend with the same PC has identified this device as "USB hub" generic "on his PC. Where and how to find the driver?

    Thank you
    Franck

    Hello

    For the use of the USB ports on your machine that you n t need any special drivers and you won't find anything on the Toshiba download page. After the installation of Windows XP Home edition, the ports are recognized correctly.

    I really put t know which driver you are trying to configure but usually the driver must be installed to the device, and not for existing USB ports. As far as I know, this unit has USB 2.0 and there should not be any problem.

    Also check The PRESENT DOCUMENT
    Maybe the help!

    Good luck!

  • Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

    Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

    Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

    original title: DEVICE DRIVER has NOT been INSTALLED successfully.

    Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

    If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • USB HUBs in Windows 7 has stopped working

    All devices connected to a USB 2 HUB worked until today on Windows 7 Pro System.  Uninstall and re install installs the device in the field "Other devices" without a pilot.  When I select Generic USB hub to the installation, it is not recommended.  Installation in any way will result in failure: Code 31.

    Hi John,.

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What was the reason to uninstall and reinstall the USB hub?

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run this Microsoft fixit and check if that helps.
    Reference:
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems

    If this does not help, then use method 2.

    Method 2:
    I suggest you uninstall and reinstall the USB controllers and check the issue.

    Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

    To uninstall and reinstall the USB controllers, follow these steps:

    a. Click Start, type Manager of devices in the search box of start and press ENTER.

    b. develop a 'USB Bus controllers'.

    Note: You will need to scroll down to find this point.

    c. right-click on the first controller USB under "In Bus USB controllers" and then click "Uninstall" to remove it.

    d. repeat the above steps for each USB controller that is listed under 'USB Bus controllers'.

    e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

    Now, check the USB device to see if it works.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Elite 8100 desktop HP will not start when it is connected to the USB hub

    HI, I have a problem with USB HUB (US221A, 2PORT USB 2.0 SWITCH) - powered by the computer.  If the USB port is connected to the start the PC hangs at the HP logo screen - nothing works.   If I press F9 during boot error 43 occur.

    Looking for abios update.

  • Satellite C660-28V - USB hub problem

    Hello

    1st of all I'm not at all English-speaking countries so forget all accidental that confuses a may (and I will approve me) write down.

    So, how do I write about this threat, I have problem with my usb hub that I try to explain what exactly past in my book but the 1st I have satellite model n. c660-28v part No. psc1ge-03j008cz running win7/64 and on Toshiba support article for this specific book cant find any generic hub driver usb or any driver related to USB in all the

    Some about 2 months I reinstall my OS not with recovery, but with clean OS and I have the problem since.
    Since then im not able to find or fix this something driver works but not all... some external drives, flash, mouse, keyboards readers work at all before re-installing everything works fine.

    Its not so bad, but sometimes it drives me crazy, especially in times when im in a situation of time when I have no time for disorders like that readers

    Book always telling me that I have the latest drivers even after uninstalling and rebooting.
    If this is not enough given just ask

    Thx for advice or support that u can give me

    Suzeline

    Hello

    I ve checked specification for your laptop and I can see your laptop was initially offered with Win7 64 bit so I do not understand why you do not use this original version.
    You can install the original recovery image and optimize it to your needs.

    OK, you may want to have the Ultimate version and your own installation of operating system should not be a problem because all the necessary drivers, tools and utilities that you can download drivers Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Of course, that we know not what you have installed and how it looks like when you open Device Manager. All hardware installed and registered correctly?

    In any case, I can say, is that all the drivers for Win7 64 bit, tools and utilities are available, and you must install all the.
    The right installation order is as follows:
    Windows 7 64 bit
    TOSHIBA Assist
    Chipset SW installation utility
    Intel Management Engine Interface
    Intel driver
    Intel Rapid Storage Technology driver
    Realtek Audio Driver
    TOSHIBA supervisor password utility
    TOSHIBA HW utility
    TOSHIBA Flash Cards Support utility
    TOSHIBA Value Added Package
    Realtek LAN Driver
    Synaptics Touch Pad Driver
    Realtek card reader
    Bluetooth Stack for Windows by Toshiba
    Wireless LAN driver
    ConfigFree
    TOSHIBA Network Device ID registry tool
    TOSHIBA Web Camera Application
    TOSHIBA face recognition
    TOSHIBA HDD_SSD alert
    TOSHIBA Service Station
    TOSHIBA Disc Creator
    TOSHIBA Media Controller
    TOSHIBA Media Controller Plug - in1.0.5.11
    TosVolRegulator_x64_1.1

  • USB Hub problems

    We must use an IO digital USB 6501 and a card to USB-6525 relay but I just want to have a USB cable running back to the computer.  For this application, a USB Hub makes sense, but I wanted to ask the public OR and see if anyone has had problems with the use of a USB hub to USB DAQ card control.  Any info at all will be greatly appreciated.

    See you soon!


  • One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

    Original title: USB device not recognized

    Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

    Hello

    (1) is the specific question of specific USB devices?
    (2) did you of recent changes to the computer before the show?
    (3) have you tried plugging the USB stick on another computer?

    (4) what is the brand and model of the computer?

    I suggest to refer to the following methods and check if it helps to solve the problem.

    Method 1: Hardware devices do not work or are not detected in Windows

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: USB Port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

    Reference:--

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  • Equium A60: USB Hub problems

    I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
    It causes also the PC hang on shutdown and startup
    Hass someone at - it had similar problems

    Hello

    As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

    I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

    All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

  • Problems using external USB hub with A30

    I have a Toshiba Satellite A30-514 with a USB powered 2.0 hub attached. In it's plugged a powered satellite Receiver/USB modem (for connection broadband), a USB bluetooth adapter and a HP PSC 1350 printer. The first two devices work fine, but the printer is not recognized correctly.

    The powered USB hub is plugged into the first USB port on the laptop. The second USB port on the laptop is used by the receiver for a wireless optical mouse. It must be here otherwise, it does not work.
    If I plug the printer directly into the second USB port on the laptop, it works fine.

    In Device Manager, instead of show all HP devices it comes to peripheral USB Composite in the USB controllers section. It is an orange exclamation next to him.

    If I boot the laptop with all 3 devices plugged into the hub and turned on, the printer is detected fine but the Bluetooth Radio devices have an orange instead exclamation point. I need the bluetooth device to attach a cell phone to the laptop. If I unplug the printer and restart the bluetooth is detected OK. Plug the printer in causes the Composite device to reappear with the exclamation point!

    From left to right, looking at the front of the hub, devices are 1) satellite receiver/modem, 2) Bluetooth printer) 3.

    I hope it's clear. Any help / advice would be received with gratitude.

    Hello

    I think the problem is that one of the devices does not have enough power to operate. This is because a single USB port must provide 3 devices with power. If you have an external power supply to one of the features of this you should use.

    Good bye

  • suddenly stops when the external usb hub is attached

    My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

    Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

    Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

  • Time machine on a usb hub

    Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

    Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

    Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

    These hubs are externally powered? And what else is connected to them?

  • drive external hard connected via usb hub powered Time Capsule guard fall...

    Hello.

    Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

    When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

    After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

    What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

    Just seems like something somewhere that expire, causing it to drop the connection...

    Thanks for your useful suggestions to fix this!

    Is your TC the Gen5, model AC?

    I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

    What is the speaker (the box is powered)?

    Quality of the envelope varies a lot... What is it??

    If this is the typical brand X... Plug it into your Mac. is it reliable?

    Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

    I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

    I start TM. After a few minutes the backup fruitbodies.

    Check in the finder, it has created the sparsebundle and works.

    Can you have a USB hub between the external hard drive and time capsuls?

    It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

    Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

    The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

    I started a thread for a database just now... has not progressed much.

    https://discussions.Apple.com/thread/5912861?TSTART=0

  • How to install this update and resolve problems of USB and the touchpad?

    I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
    Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

    The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

    The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

    This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
    Driver revision history:
    Twinhan VP704A Driver Release Notes
    -------------------------------------------------------------------------------
    Note:
    1. in the event that the system hangs when running with VP704A, please install ULI
    Host USB 2.0 in \ULiUSB20Driver driver

    2. for XP/SP1, please update with the patch in

    3. in XP/SP1, update driver will crash the system, while the new facility is ok.
    The trick to update driver XP/SP1 is illustrated in the following steps,
    a. uninstall the driver
    b. disconnect and reconnect the USB device
    c. install the driver
    4 to support the controller remotely, please launch Agent.exe in \Agent.
    Further details at \Agent\Readme.txt

    Known issues:
    1 multi-instance is not supported
    2 remote wakeup is not supported
    3. strong use of the processor from analog video/audio capture
    4. bad Signal using color YUY2 format IST
    5 AV sync if audio captured the wrong filter.
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
    6. noise with analog TV and FM Radio
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

    Driver revision history:
    -------------------------------------------------------------------------------
    2005-10-24, version: 1.0.2.8
    Bugs fixed and new features:
    1 is not correctly configured.
    -------------------------------------------------------------------------------
    2005-10-21, version: 1.0.2.7
    Bugs fixed and new features:
    1. the firmware version read FLASH OK!
    -------------------------------------------------------------------------------
    2005-10-14, version: 1.0.2.6
    Bugs fixed and new features:
    1.MUtil - access driver empty part lower part of screen when IST!
    2.MUtil - access HCT pilot check fix crash!
    -------------------------------------------------------------------------------
    2005-10-07, version: 1.0.2.5
    Bugs fixed and new features:
    1 tuner turns off when S-Video, Composite.
    -------------------------------------------------------------------------------
    30/09/2005, version: 1.0.2.4
    Bugs fixed and new features:
    1.agent.exe update for repeat bug!
    2.TI5150 sign up to fix video Format!
    -------------------------------------------------------------------------------
    2005-09-29, version: 1.0.2.3
    Bugs fixed and new features:
    1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
    Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
    2 reset TI5150 when a new frequency is defined
    -------------------------------------------------------------------------------
    2005-09-27, version: 1.0.2.2
    Bugs fixed and new features:
    1. difficulty I2C unstable access on some devices.
    -------------------------------------------------------------------------------
    2005-09-23, version: 1.0.2.1
    Bugs fixed and new features:
    1. analog TV becomes sometimes darker.
    -------------------------------------------------------------------------------
    15/09/2005, version: 1.0.2.0
    Bugs fixed and new features:
    1. difficulty of installation INF for Windows 2000.
    2 FM scan radio policy changed!
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.9
    Bugs fixed and new features:
    1 USB string serial number not visible with USBView, updated firmware required.
    2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.8
    Bugs fixed and new features:
    1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
    -------------------------------------------------------------------------------
    12/09/2005, version: 1.0.1.7
    Bugs fixed and new features:
    1. improve the performance of check channel lock status
    2 pinnacle INF Fix.
    -------------------------------------------------------------------------------
    2005-09-09, version: 1.0.1.6
    Bugs fixed and new features:
    1. Add an audio initialization function.
    -------------------------------------------------------------------------------
    2005-08-31, version: 1.0.1.5
    Bugs fixed and new features:
    1 separation of PAL and NTSC resolution mode.
    -------------------------------------------------------------------------------
    2005-08-30, version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2 frame drop.
    3 pinnacle inf file HCT chkinf fail.
    -------------------------------------------------------------------------------
    2005-08-22, version: version 1.0.1.3
    Bugs fixed and new features:
    1. add remote control interface in digital source filter.
    2.A new remote test tool that contains of the source code in \Test_RC.
    -------------------------------------------------------------------------------
    2005-08-16, version: 1.0.1.2
    Bugs fixed and new features:
    1. Pinnacel & Twinhan driver & file reorg.
    2.VP704A_BDA_Test tool, add a test to the system code.
    3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
    4 firmware update
    -------------------------------------------------------------------------------
    2005-08-15, version: 1.0.1.1
    Bugs fixed and new features:
    1 serial number feature is lost when the audio volume of the TV control
    2.RC6A support CIR
    (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
    The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
    EEPROM must be flashed with \Firmware\M9207.bin)
    3 Serieal, MAC address and name of device OEM taken in charge.
    Please see for more details on the \Firmware\readme.txt.
    4 Ioclt example source code included.
    -------------------------------------------------------------------------------
    08/08/2005, version: 1.0.0.10
    Bugs fixed and new features:
    1. increase audio volume analog TV.
    -------------------------------------------------------------------------------
    04/08/2005, version: 1.0.0.9
    Bugs fixed and new features:
    1. analog TV Video mode failed.
    -------------------------------------------------------------------------------
    2005-08-03, version: 1.0.0.8
    Bugs fixed and new features:
    1.off - centerf frequency scan + / 125Khz
    2 difficulty program a copy scanned in MCE.
    -------------------------------------------------------------------------------
    02/08/2005, version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
    2. improve the stability of I2C communication.
    3 unify signaling resistance & quality as a THBda ioctl interface.
    4 capture filter lock state control.
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.5
    Bugs fixed and new features:
    1. the same strength & quality signals as VP7046.
    2 debug build pilot
    -------------------------------------------------------------------------------
    2005-07-21, version: 1.0.0.4
    Bugs fixed and new features:
    1. put the INF update.
    -------------------------------------------------------------------------------
    2005-07-20, version: 1.0.0.3
    Bugs fixed and new features:
    1 improve performance in PCM4
    2 passage of the analog TV Mode to FM Mode failure
    -------------------------------------------------------------------------------
    2005-07-04, version: 1.0.0.2
    Bugs fixed and new features:
    1. production tool FM test OK!
    --------------------------------------------

    And here is the Readme file from the other file in the update?

    ************************************************** ************************************************
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
    ************************************************** ************************************************

    ----------------
    INTRODUCTION
    ----------------

    This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
    and Windows XP.

    -------------------------
    CONTENTS OF THIS DOCUMENT
    -------------------------

    1. installation instructions
    2. uninstall instructions

    ----------------------------
    1. installation instructions
    ----------------------------

    (Windows 98SE & Windows ME)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files in your Windows system, and then restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files to your Windows system, then turn off your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows 2000)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows XP)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -Click "NEXT".
    -This program will install and load the driver and you do not have to restart the
    computer.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller', proceed with the installation.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.

    Notice:
    If you can not configure driver successfully. Please restart your system, then follow
    steps to reinstall driver above.

    ------------------------------
    2. uninstall instructions
    ------------------------------

    1. open the "Control Panel" folder.
    2 call the "Add/Remove Programs" icon
    3 choose the "ULi USB2.0 Driver" section.
    4. click on the "add/delete" button to remove drivers.

    -----------------------------------
    Change list:
    -----------------------------------
    1.74
    1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
    2. support all USB2.0 Host Controller.
    1.73
    1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
    2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
    3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
    4 solve problem as wirless lan will disconect when the plug in usb device.

    1.72
    1 fix that system crash when HD USB copy large files.

    1.71
    1. improve the management of power in Win98 / Me.

    1.70
    1. improve the devcie detection function.

    1.62
    1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

    1.61
    1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

    1.60
    1. in support of functions power management when a HUB with the USB plug in device
    a root HUB.

    1.57
    1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
    2. fix audio problem that can not display smooth when peripheral USB connect to the system.
    3. fix system cannot detect DVICE USB when the USB device attached to the system in
    suspend mode.
    4 fix when root USB HUB have a full load, USB HD sometimes
    failure of the transaction.

    1.56
    1 fix that device of DVD decoder cannot display correctly.

    1.55
    1. fix OTI USB 2.0 drive hand cannot detect question.
    2. attach the USB mouse cannot be used after the resumption of hanging.

    1.54
    1. to improve the safety of the driver.

    1.53
    1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
    2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

    1.52
    1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
    automatically fix file system errors
    2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

    v.1.51
    1. to improve the compatibility of USB 2.0 card reader.
    2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

    v1.50
    1. improve the transfer block

    v1.48
    1. difficulty of installation of the USB 2.0 LAN driver hangs up
    2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
    3. fix some laptops starting hanging Win98SE

    v1.47
    1. improve the performance of bulk transfer.
    2. fix the failure of USB 2.0 Preview in bulk webcam.

    v1.46
    1. support USB 2.0 and 1.1 devices isochronous
    2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
    3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
    4. improve the capacity of the device detection in Win9X / ME

    v1.45
    1. fix system hang up when the mode standby ACPI.
    2. attach the mouse sometimes does not disappear when it is unplugged.
    3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

    v1.44
    1. composite crutch
    2 improve the detection of devices

    v1.43
    1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
    2 difficulty at high peripheral speed detected as full-speed device
    3. fix some problem of failure detection USB mouses
    4. fix some problem USB 2.0 Hub failure detection
    5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

    v1.42
    1. fix PC Card eject hang up in Win98 / ME
    2 difficulty of interruption/resumption hang up in Win98
    3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
    4. fix some failure detection of PC Card USB 1.1 devices

    v1.41
    1. Add new feature that system can install the driver ahead of the device is plugged in.
    2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

    v1.40
    1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
    2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

    v1.32
    1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
    If the path of the OS is not c:\windows.
    2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

    v1.31
    1. Fix problem that driver cannot install on Windows 2000.

    v1.30
    1 fix than Win9X / shows ME no USB 2.0 hub.
    2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
    3 Fix problem that sometimes when you click on "search the hardware changes.
    for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
    file is not found.
    4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
    verison of ULi EHCI controllers devices are connected and disconnected.
    5 install the driver support for several features of controller EHCI ULi existing on
    system at the same time.
    6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

    v1.20
    1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

    ULi Coporation. (ULi) web sites:
    http://www.Uli.com.tw/ (Taiwan)

    CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

    I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

    It is said above 2 relevant and 1 right ANSWER available...

    I'm new here, so anyone could direct me to these answers?

Maybe you are looking for

  • a tabpage to increase the size of the characters

    I have 3 pages of tabs in mijn browser. I'll do a page increase to the best size. But the other pages must be 100% this.

  • Slot Netbook Sim Toshiba NB200-12N for mobile internet

    Hi all I bought a Toshiba Netbook NB200-12N, and when I looked at the manual, it said that it had a Sim slot under the battery for the mobile internet. However, when inserted the Sim Card into the slot and switched the netbook on nothing happened. Th

  • How can I get rid of the Bing virus?

    original title: Bing Virus How can I get rid of the Bing virus?

  • Vista has a corrupted registry and I can't start

    My dilemma is that after having replaced just the motherboard, installing Vista on a RAID 1 array will not start.  I tried the Vista DVD recovery with repair system nothing helps.  I get just the message, file: \Windows\system32\config\system status:

  • main entry point number method

    I decide to make a new post, because that is where my problem extactly... I found this: the other entry's going to call the main method with the parameter that is passed, regardless of knowing if the application is running.  on this post http://suppo