USB Hub problems

Similar Questions

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

• Satellite C660-28V - USB hub problem

  Hello

  1st of all I'm not at all English-speaking countries so forget all accidental that confuses a may (and I will approve me) write down.

  So, how do I write about this threat, I have problem with my usb hub that I try to explain what exactly past in my book but the 1st I have satellite model n. c660-28v part No. psc1ge-03j008cz running win7/64 and on Toshiba support article for this specific book cant find any generic hub driver usb or any driver related to USB in all the

  Some about 2 months I reinstall my OS not with recovery, but with clean OS and I have the problem since.
  Since then im not able to find or fix this something driver works but not all... some external drives, flash, mouse, keyboards readers work at all before re-installing everything works fine.

  Its not so bad, but sometimes it drives me crazy, especially in times when im in a situation of time when I have no time for disorders like that readers

  Book always telling me that I have the latest drivers even after uninstalling and rebooting.
  If this is not enough given just ask

  Thx for advice or support that u can give me

  Suzeline

  Hello

  I ve checked specification for your laptop and I can see your laptop was initially offered with Win7 64 bit so I do not understand why you do not use this original version.
  You can install the original recovery image and optimize it to your needs.

  OK, you may want to have the Ultimate version and your own installation of operating system should not be a problem because all the necessary drivers, tools and utilities that you can download drivers Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Of course, that we know not what you have installed and how it looks like when you open Device Manager. All hardware installed and registered correctly?

  In any case, I can say, is that all the drivers for Win7 64 bit, tools and utilities are available, and you must install all the.
  The right installation order is as follows:
  Windows 7 64 bit
  TOSHIBA Assist
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Flash Cards Support utility
  TOSHIBA Value Added Package
  Realtek LAN Driver
  Synaptics Touch Pad Driver
  Realtek card reader
  Bluetooth Stack for Windows by Toshiba
  Wireless LAN driver
  ConfigFree
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  TOSHIBA face recognition
  TOSHIBA HDD_SSD alert
  TOSHIBA Service Station
  TOSHIBA Disc Creator
  TOSHIBA Media Controller
  TOSHIBA Media Controller Plug - in1.0.5.11
  TosVolRegulator_x64_1.1

• Problems using external USB hub with A30

  I have a Toshiba Satellite A30-514 with a USB powered 2.0 hub attached. In it's plugged a powered satellite Receiver/USB modem (for connection broadband), a USB bluetooth adapter and a HP PSC 1350 printer. The first two devices work fine, but the printer is not recognized correctly.

  The powered USB hub is plugged into the first USB port on the laptop. The second USB port on the laptop is used by the receiver for a wireless optical mouse. It must be here otherwise, it does not work.
  If I plug the printer directly into the second USB port on the laptop, it works fine.

  In Device Manager, instead of show all HP devices it comes to peripheral USB Composite in the USB controllers section. It is an orange exclamation next to him.

  If I boot the laptop with all 3 devices plugged into the hub and turned on, the printer is detected fine but the Bluetooth Radio devices have an orange instead exclamation point. I need the bluetooth device to attach a cell phone to the laptop. If I unplug the printer and restart the bluetooth is detected OK. Plug the printer in causes the Composite device to reappear with the exclamation point!

  From left to right, looking at the front of the hub, devices are 1) satellite receiver/modem, 2) Bluetooth printer) 3.

  I hope it's clear. Any help / advice would be received with gratitude.

  Hello

  I think the problem is that one of the devices does not have enough power to operate. This is because a single USB port must provide 3 devices with power. If you have an external power supply to one of the features of this you should use.

  Good bye

• Sleep on computer problem; Generic USB hub

  My computer has had trouble sleeping, and this time I was able to find something in the event viewer, directly related to it. Sometimes the computer goes to sleep, sometimes it will not, often times possible to sleep for a few seconds then wake up to the top.

  Event Viewer, said ' Wake Source device: Generic USB hub»

  Note, that there is no hub USB connected to my computer. There are hanging things that are USB, certainly including my printer, external hard drive, which are both off the coast. There's also the keyboard, optical mouse and speakers, this is it.

  Any thoughts? Perhaps one of the USB ports is the cause.

  2 other computer tech says sleep disorders are usually caused by the RAM or RAM from port problems.

  Well, please follow the link I provided and read the articles for this search. You must go through all the devices in the Device Manager and check the relevant settings. It is clearly your USB Hub (integrated is a hub, too) that it prevents to go to sleep.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Time machine on a usb hub

  Last summer, my iMac (running El Capitan) 2010 started hooking serious problems where the only solution would be to perform a reboot of the material.  After much experimentation and running on an external drive, I discovered that Time Machine was the culprit.  That is, when TM was off, the Mac has worked well, but if I turned back on, after 12-24 hours of TM, the Mac, would essentially become unusable and require a restart of hardware.  While I would certainly prefer to have current backups made via TM, there is nothing on this machine that had not been saved on other storage devices, so I was happy to let it go for several months.  Thinking maybe TM two disks, I had been using had been corrupted, I have them off and on again 5 TB (internal drive is 1 TB).  Once again, the same results.  Thinking maybe the USB hub was at fault, I replaced the hub last night.  This morning, everything seemed fine, but four hours later, after being in mode 'sleep' for most of the time, it was frozen again.  I have attached from the player to the USB port on the iMac Freedmen and will wait to see what happens.

  Now I read that Apple has recommendations for the use of TM and nowhere in there is a mention, a USB hub, for or against.  Anyone has any information (even if it's just anecdotal) regarding the use of the Time Machine disks via a USB hub?  For the record, the drive is a Seagate 5 to, USB 3.0, and I connected via USB 2 and 3 USB hubs with the same results (suspended).

  Anyone who can shed light on this aura of gratitude.  It has been confusing me for some time - especially since it seems that nothing of what I found to indicate that you can not or do not use a Time Machine drive via a USB hub.

  These hubs are externally powered? And what else is connected to them?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Canvio Desk and passive USB hubs?

  I have Toshiba Canvio Office 5 TB HDD (HDWC250EK3J1).

  Manual says not to use passive USB Hubs, but given that this hard drive draws its energy from the wall socket, can I still use passive USB - Hub?

  Is it because it slows down HD or it causes real problems?

  There are situations where I would use passive USB - hub for a short period of time.

  So it causes losses of data or really bad things or what?

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.

• Belkin USB Hub does not work with my Satellite A30

  I recently bought a belkin usb hub high speed and I can't make it work on my satellite A30 properley. I was told it was something to do with the standard devive Manager improved! I was told he shouldn't say that, but not how to solve this problem? any ideas?

  Hello

  Is the USB hub with external power supply.
  Because without one, it may be that the A30 does not provide the tension that the hub needs!

  Good bye

• Satellite 5005-S504 need generic USB hub driver

  Hello

  I'm looking for the driver for the USB devide with the following details:
  * ' USB Device '.
  * VID (Vendor ID) 0930 (== TOshiba)
  * Product ID = 0400

  I am running windows XP. While trying to install a printer, I had to update the usb driver, which has caused all my usb ports stop working. After that, I uninstalled the USB drivers for windows to reinstall uppon reboot, but it did not. As a result, none of my USB ports are currently working, and I have a USB device not recognized in Device Manager

  A friend with the same PC has identified this device as "USB hub" generic "on his PC. Where and how to find the driver?

  Thank you
  Franck

  Hello

  For the use of the USB ports on your machine that you n t need any special drivers and you won't find anything on the Toshiba download page. After the installation of Windows XP Home edition, the ports are recognized correctly.

  I really put t know which driver you are trying to configure but usually the driver must be installed to the device, and not for existing USB ports. As far as I know, this unit has USB 2.0 and there should not be any problem.

  Also check The PRESENT DOCUMENT
  Maybe the help!

  Good luck!

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• Pavilion 17-g113dx: USB hub does not work on Pavilion 17-g113dx after intallation of win 7

  Hi, I have a 17-g113dx Pavilion, which was originally to gain 10 on it, but I'm frustrated with it and installed win 7.  After the driver installation failed for the USB hub.  Is there a driver that is compatible with this machine and the operating system that I can download?  The hardware ID are listed below.  I have several other questions, but it is the largest.  Thank you.

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Hello:

  For the first unit, download and install the 2nd driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  For the 2nd device, install you the driver of USB3 has not ended.

  See if it works.  Download and unzip the driver Intel USB3 lasvegaswireman posted.  Do not run it.

  Go to Device Manager and click on the USB hub root of problem.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the Intel USB driver you have unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

  The third device... you run the patch from the link below to activate the TPM on W7 2.0 device.

  https://support.Microsoft.com/en-us/KB/2920188