Sleep power dripping baterry

Similar Questions

• Why have I not sleep power options?

  On my menu and stop of departure options, sleep is gray out and not selectable. In power options, do not "sleep" option for closing the laptop computer, hit the power button, nothing. Its as if it has been removed entirely. I have re-installed windows 7 on this Toshiba due to problems of that what is happening with the mode 'sleep' anyway, basically whenever you go out the night before the laptop died instantly. All the patches?

  Found the answer and it fixed. need driver for proper display of the manufacturers Web site

• My Mac Pro 2013 will sleep is no longer

  A month or there is my Mac Pro 2013 is no longer sleeps, even if I try to sleep it manually. I have enabled and changed the setting of Sleep/Power Nap in energy-saving.

  I looked at the article Apple and that did not help. I have reset the SMC and booted without failure. I haven't changed any connected equipment or internal. The console log does not help me, but here's the most recent when I sleep manually it. I have bolded the line that started the sleep/low power mode and the line where it was released

  20/05/16 2:00:42.429 PM CommCenter [435]: CSI telling to go to low power.

  20/05/16 2:00:42.429 PM AirPlayUIAgent [588]: 2016-05-20 02:00:42.428658 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.suggestions.harvest: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 33136 seconds.  Ignorant.

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.icloud.fmfd.heartbeat: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 468717 seconds.  Ignorant.

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.567 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff29d120e10 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.567 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7ff2327077c0 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.588 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: NC disabled: NO

  20/05/16 2:00:42.588 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: NC disabled: NO

  20/05/16 2:00:42.588 PM sharingd [469]: 14:00:42.588: purged hashes contact

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: discoverable mode changed to Off

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: Scan stopped BTLE

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_lock_screen_screenshot: authw 0x7ff54a014c00 (2000) [0, 0, 0, 0] shield 0x7ff54d055c00 (2001), dev [1920,1080]

  20/05/16 2:00:42.598 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.599 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.599 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: DND enabled: YES

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: DND enabled: YES

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:48.000 PM kernel [0]: IOUSBHostHIDDevice@00223000,0 074948.944989: IOUSBHostHIDDevice::interruptRetry: resetting the device due to failures of IO

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - fConsecutiveResetCount = 1.

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - PortLogging (Disable) = kIOReturnNotReady.

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL SUSPENDED auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() suspension AWDL, enterQuietMode (true)

  20/05/16 2:00:49.000 PM kernel [0]: Airport: RSN full on en2 handshake

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL of SUSPENSION auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlAutoMode AWDL recovery

  20/05/16 2:00:49.000 PM kernel [0]: ARPT: 74949.082534: wl0: roamed or channel switching, #0, bssid 48:f8:b3 reason: this: e7:3 c, last RSSI-65

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: changed en2::IO80211Interface:postMessage bssid

  20/05/16 2:00:49.000 PM kernel [0]: AppleUSB20Hub@00220000 074949.251405: AppleUSBHub::deviceRequest: reset because of persistent errors

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing an observer living device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing observer device format < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: remove observer data source for device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removal of observer source of the device data < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:52.429 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:00:52.479 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:01:10.304 PM CommCenter [435]: CSI by saying to the low power output.

  20/05/16 2:01:10.308 PM loginwindow [102]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer by observing

  Hello..

  Sorry to hear that your Mac Pro is upward...

  If you have not yet tried, Reset NVRAM on your Mac.

• Touchpad and sleep questions on Satellite C50-A-1DV

  I bought a Satellite C50-A-1DV for my wife and noted 2 significant 'features' that, to all purposes intention should be easily solved, but I'm damned if I can cure for her.

  1 the touchpad (at least, I assume it is the touchpad) seems incredibly sensitive. Supervised, another workspace (Windows 8) seem to open even without direct contact with the pad. It's really very annoying, but it's pretty much within the limits to be able to live with it.

  2nd machine is unexpected drops in a sleep/power saving mode. Now personally I have not met this when running through controls on it, but the pain in my ear tells me otherwise.

  Anyone else experienced this or better yet have a solution to this?

  > 1 the touchpad (at least, I assume it is the touchpad) seems incredibly sensitive. Supervised, another workspace (Windows 8) seem to open even without direct contact with the pad. It's really very annoying, but it's pretty much within the limits to be able to live with

  Changes to the touchpad can be applied very easily:
  Go to control panel-> mouse control
  Last tab device settings would offer you some additional options to enhance the functionality of the touchpad.

  Take a look at this Toshiba HowTo doc on the touchpad settings. It should be useful for you:
  [How do I change the settings of the Synaptics touchpad in Windows 8? | http://APS2.Toshiba-tro.de/KB0/HTD3101Z30000R01.htm]

  > the machine is down unexpectedly in a sleep/energy saving of 2nd mode. Now personally I have not met this when running through controls on it, but the pain in my ear tells me otherwise.

  Well, you could disable or change the settings of the unique power of the Panel-> power options.
  You will find the option for standby and hibernation

• Tecra A11 won't recover/restart of sleep

  Hi guys,.

  I have a TECRA A11 model no - PTSE1A - 00M 005.
  It has Windows 7 Professional 64 bit and is up-to-date on all windows update.

  When I click the power button and send it to sleep (power button / stop is set to sleep) or close the cover and he goes to sleep, I can't click the power button again and recover or restart from sleep. It doesn't do anything.
  Power, power sector and battery plug lights up green but the hard drive does not start, or I do not see the hard drive Led light up.
  I have to keep the power button for 5 seconds to stop the laptop, and then restart it.

  In addition to this, I also have times when the computer is turned off correctly, but when I go to start it, it won't start. As usual the left 3 lights, but the hard drive light does not illuminate. The fan starts, but the computer will not start. I have to press the power button again for 5 seconds for the computer, close and then restart. The second time round it always starts.

  This problem has me baffled for a while now and I can't find a solution for this.
  Any help would be much appreciated.

  Thank you

  Since when did you notice this kind of behavior?

  Try please set the BIOS to default settings and check the startup problem.

  FN + F3 to put the laptop into sleep mode, close the cover and after a few minutes open the cover and press the power button. The same problem happens again?

• Pro 3 yoga and Hibernation power button

  Hello

  I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).

  Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.

  Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.

  Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.

  Thanks for any help.

  Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.

• OfficeJet 6968: Officejet 6968 loses connectivity after sleep

  OfficeJet 6968: easy to undertake together upwards more wireless, then it totally fails when energy saver or sleep mode is used (what's it called depends on whether you are looking at the screen of the machine or its settings via a computer). This has been a very difficult and aggravating problem, because it makes you think that everything is connected and is doing so well. Then, suddenly, nothing connects more - not the computer, not an ipad, no access to assistance from the IP address of devices, etc. - which works perfectly a single minute there!  Tried a different printer (started with a 6978) and have the same problem, so it is either something in the software or an incompatibility with my wireless set up.

  After searching for hours through the forum and seeing other problems with sleep/energy saver, followed the problem down to the sleep/wake. Modification of the duration of sleep for 5 to 10 minutes moved the problem of connectivity to 10 minutes.

  6968 actually stopped in the middle of an active print job. Just left. 12 pages for a job of 24 pages. Restarted printer and it has taken over part of the work.  Apparently sleep energy saver does not care if it is actually used. Same problem, try to load the software on the computer. About 5 minutes in the Setup routine, when comes the sales pitch for the service of the ink, the computer displays that it loses the connection with the printer. So much for the implementation.

  An aggravating role through all of this, is that the screen of the printer says it is connected to the network. Gives no sign of problems. He sleeps screen darkens, you press a button to wake up and then it signals that all is well. Blue network light solid. The specified IP address. Thin connection. Apparently not, as no computers or phones or Ipads can see it... shows as disconnected in the devices in the computer. And the journal of router sees cut right to the 5 minute mark (or 10 when the value for that) almost to the second!

  Access its settings through its IP address, tried to update the software and guess what... hit the 5 minute mark and he has even stopped the update process. So apparently this timer sleep-saving energy company outweighs everything else what is the printer.  Incredible.

  Abandoned the wireless for a cable to the old (luckily I had one, because apparently the cables, printed instruction manuals and the owners are too outdated these days for HP technology). Turn off the radio. print a test very well. Waited for the printer screen to go black, indicating "standby" mode. Tried to print close to success when the printer on, then he sat down and gave the blue circle of frustration... "Printing"... 'Printing'... posted for almost 5 minutes... then 'Cancel'... fed with a blank page, whirred and leading in-house for a minute, then fed a page with strips that looked like smeared barcode. So about 10 minutes in a revival completely fail - and this with a CABLE not my wireless, has if clearly it has a sleep problem in the HP software. Perhaps the ultimate energy saver?  After all this he printed a test very well - however, after a wake upward, wasted paper and ink failure and not forgetting the 10 minutes. To print a single word: 'TEST '.

  Unfortunately, there seems to be no way to completely disable mode 'sleep'. Heck, it would be better to just completely turn the thing, as the time to roll a reboot is much less than the time to wake up and move to a successful impression, but the off timer is the order of the hours is no help. Certainly, it would be a really poor solution for a printer whose main selling point is a wireless connectivity for multiple devices!

  All I wanted to do 3 weeks ago was replace a dead Canon printer. Worst experience HP I had in the 1930s. Thus, HP. Any other ideas? Just somehow disable this sleep BS?

  Number of brand and model of the router?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer that ' Auto Off/sleep/power saving mode ' is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server in the printer.
  5. Wireless printers work on the band Wireless 2.4 Ghz not the band 5.0 Ghz.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit.  Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 5 feet independently of each other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES (Personal-PSK) encryption, but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Always make sure your router is on the latest firmware.
  8. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  9. Marketing the printer and check that it reconnects to the router.

  Microsoft has announced an update of Windows for the detection of device address... mode devices .waking 'sleep'. Update your Windows 10.

  https://support.Microsoft.com/en-us/KB/3147458

  If you have Windows 7/8/8.1 discovery network is on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now the last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php .  Use a powerful scanner at the end and remove all registry entries.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• OfficeJet pro more than 8600 wake up from sleep problem

  My officejet Pro Plus 8600 not wake when looks like it went into mode 'sleep' (power LED flashes slowly). I'm unable to print, use the touch screen or off without unplugging it to reset. Then, he repeats the cycle. I use Windows 7 and network through a Verizon MiFi.

  I've deleted and reinstalled my printer and driver/software using the CD that came with it and I think that the "unable to wake" problem has been resolved. Hope it helps someone else.

• Behavior of sleep/wake 7130

  I have the vPro 7130 I recently updated to the latest version of the BIOS (A10), video & firmware updates. So far, the question of touch very pesky ghost seems to have been resolved. Finally! BUT now the sleep function (or more precisely, to wake up from sleep) seems to behave like a reboot. When I put the system to sleep, the display turns off immediately and I guess he falls asleep, as expected. BUT when I press the power button to wake him up and it is exactly the same way it does when I turn on it after a stop... past the POST and none of the applications I had opened are open. For example, if I had IE opens when I put it to sleep, after the "Awakening", when I start IE return it asks if I want to restore the previous sessions. I tried hibernate as well... It's worse! After pressing the power button after hibernation, the unit goes in the MAIL, then the kind of screen of light but it is, is just like that forever or until I get tired to wait (long, I waited is 10 minutes - then an eternity) and press on & hold the power button to stop it. Does anyone else know this? Made Eve pretty useless. It is certainly not the way which my laptops waking from sleep. Any help would be appreciated

  Hey people it seems that I solve this problem!

  I open the bios setup, active and disabled the feature 'block sleep' to force the sistem of re - save the option.

  Then, I selected the boot sequence complete rather than minimum (which is also the default), applied all changes and then the configuration of the bios have left.

  After the automatic restart of the sistem, sleep/power off problem has been resolved. Now my DVP 11 past in mode 'sleep' correctly. I just had to wait a bit for the first "suite" after these changes.

  I'll know if this solution is stable or not, but for now by selecting the full boot instead of the minimum mode seems to have also fixed other little freeze problems.

  NIC

• HP 2311 x monitor won't sleep

  I have my system my computer Setup will put my monitor to sleep after 10 minutes if the computer is idle.  The problem is that my monitor will not fall asleep.  It shows the system status menu, scan for input device, said so he'll sleep, power light goes Orange and a few seconds later he wakes. Then start the whole process again and again.  If I put the system to sleep monitor goes to sleep (didn't at first when I got until I updated the driver of HP).  I connected it to the DVI plug.

  It seems that I found my own solution and I'm posting so it can help others.  Although my computer is about 3 1/5 years it has a DVI and VGA connections for the monitor.  The HP2311x monitor has DVI, VGA and HDMI connections.  I got the screen hooked up using the DVI connection.

  I changed and hooked it up to the VGA connection.  Set the computer up so the monitor going to sleep in a minute and waited.  Monitor went to sleep and not wake up until I moved the mouse.  Tested several times more and no problem.  So apparently there's something with connections DVI monitor won't sleep when you use this connection.

• Percentage of battery is not when the IPhone works on a charge

  Hello world

  I am new to Apple as a client so still getting used to the phone and it's features.

  I recently bought the Iphone 6 s more and I noticed that when I charge it and it is turned off or turned off it does not show the battery charge or how much the battery has charged as in an Android phone or when you turn off your phone and charge the battery sign appears showing the percentage that the battery is charged.

  P.S I know the battery percentage look something available that only works when the phone is turned on as in when the phone is turned on.

  Would appreciate an insight as to if IPhones as a thumbrule will not display the percentage of battery charge when it is turned off and charged or should I worry?

  Thanks in advance

  Kat (> "o" <)

  If you're in charge, click on the wake up/sleep/power on button to see the percentage below the time.

  You can also turn on

  Settings > Batteries > battery percentage to see the percentage in the upper part of the right status bar.

• New 13 "Macbook Pro - leave it on or turn off?

  Bought a new 13 "Macbook Pro. What is the right way to use it? I'm on the computer all day, usually early in the morning and again in the afternoon. The last computer I bought they advised me to just leave all the time and put it to sleep. Now some say to turn it off. What is the right way to get the most life out of my computer? Thank you!

  Have sleep/power nap when not use.

  Once a month drain to 10% battery and then recharge it fully.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• iBooks does only not on iPad

  The iBooks on my iPad app has stopped working. I can see my books. I can't get. None of the icons at the bottom of the page works except "my books".

  Yes, it's a recurring problem. A temporary solution is to close the iBooks and the App and restart your iPad.

  Double-click the home button to bring up the App selector, and then drag the iBooks App screen upward and out of the screen to close.

  Click on the button home once to return to the home screen, then press and hold the home and sleep/power buttons 10 or 15 seconds or until the Apple logo appears.  Reset draw the iPad.

  Then, you can try to open the iBooks App and see if the store tabs work again.

  It's worked for me a few times, but it inevitably goes back to being blank subsequently.

• Mini wake up monitor with Mail

  Embarrassing, even if unfortunately intermittent problem with my Mac Mini, os 10.11.5.

  When moved to enjoy TV with the night lights, my Mini kicks periodically on the Dell Monitor to get a boring jet of light, which lasts about 10 minutes.

  This seems to coincide with my audible devices giving sound new mail (and the Mini also giving him if I have speakers on).

  Unfortunately this happens not every night, but most of the nights. How to stop this aggravating behavior?

  Assuming that your have setup you Mac to sleep/power Nap (if applicable) when not used, is the system preferences > Energy Saver is Wake for verified network access?

• When I the reopen firefox, it shows the weeks, not the new tabs

  Using FF 30.0 with Windows 7. This problem started a few weeks ago. It is not always the case, but I can't determine if it follows the total sleep power off or what.

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Multiple_profile_files_created

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).