New installation of 4.0.2 hold opener connection

Similar Questions

• New installation of vCSA 5.1 - no http connection

  Hello.

  I sent a new installation of a 5.1 vCSA today but I am not able to connect over the Internet...

  Does anyone have the same problem?

  Thank you.

  Solved my problem. It works very well with portable firefox. IE has been restricted and the thinapp of firefox was old.

• Firefox opens, then is unresponsive. Cannot reset. New installation doesn't fix it. Mac OS x

  I was browsing the internet with Firefox when it froze, so I force quit. I open it, but immediately, it freezes / does the thing of mouse wheel that turns indefinitely, so I have to force quit it again.

  I tried restarting and closing of my Mac. Then, I tried to reset Firefox, but it does not. I tried Safe Mode, but it's always immediately the cursor of the spinning wheel. So I tried to do a fresh reinstall several times. But it still keeps having the same problem.

  Help!

  Ed. I don't think it could be a problem with my Add ons, because I used the same for years and never had this problem.

  One thing I've changed a few days ago is usually I leave my Firefox history store things for centuries, but I thought I'd release RAM by changing these settings. I can't remember which, however, I changed the settings may have changed something then it deletes history and and something else after the closure of each session.

  It seems that I found a solution to my problem!

  I went in "name of user/Library/Application Support /...» "and deleted the folder of Firefox with the settings of the profile, as it seemed to be the settings I changed what triggered the problem beforehand.

  I then with the sacking of the application and downloads of .dmg and remake a new installation. Firefox is now open and work normally for me. (However, I do not know why change my history in the first place settings, causing the problem.)

  Please NOTE: If someone else tries this, if you delete the folder, you will lose all your saved bookmarks. There is probably a folder in profiles that you can copy and save to preserve your bookmarks, but I don't know who it is.

• Cannot open/access media importing & NTI Shadow on new installation NMH300

  Hello

  Just bought and filled new installation on NMH300 using Windows 7/64 bit PC.

  Got a notification of successful after the installation and proceeded to a 2nd disk Raid-1 facility.

  As my 2nd drive is synchronized to the top, I tried to access the importing media both NTI Shadow by statement in Chapter 2 of the user manual.

  However, I could not open/run either of these applications.  Nothing seems to happen when I left clicked that icons, when I clicked on the right button of the mouse on the icons, did not get the menu shown in the manual (Open, Goto online media, etc.).   I got the standard Windows menu display: open, troubleshooting, cut, copy, properties, etc.

  I tried to re - run the installer multiple times, by clicking on connect computer manual one-way, but no change and got the same results as described above.

  Firmware ver: 3.18.4

  Browser ver software: 1.7.41

  Help, please!  All of the recommended suggestions would be greatly appreciated.

  Hi BHK808,

  You right click on a shortcut or you right-click the media importer icon in the system tray? With respect to NTI shadow try going to program files, then in the shadow of nti folder and try to start the application by using the application nti shadow file.

• CDROM and DVD report D:/not accessible win2k sp4 on new installation and trays open at startup

  Just installed Win2K an old pc with w2k being what came with it originally.

  Found problem when multiple upgrade files have been placed on a CD - R and then put in the CD on a new installation, and immediately it says D: / is not accessible and I think it says "service not taken in charge.

  Sought, and it was suggested to simply eject the disc and try later.  This does not solve it. And not 3rd party software, at all.    Installed nero 6, CD works fine with a disc recorded in trade, such as the Windows 2000 installation disc;  But apparently a disc recorded from another pc, with Vista using the option to make a data disc in the Explorer of

  After searching and trying several fixes, and read how others have tried but not corrected, Im trying to find the solution?

  And what happens at the start, both players, CD and DVD just open doors / ejection by themselves.

  During shutdown, the INCD app crashes and wont let close, but with or without nero or 3rd applications, the CD/DVD does not read a disc that I did.

  A suggestion said to check that the registry HKLM... but the specified folder was not there yet.  Now I know how explore feels.

  Ive searched but I'm still trying to find an exact solution for this, it's a pc to give to someone for Christmas

  
  

  Don't forget about power of Attorney

  Hi Brad,

  Windows 2000 issue you posted is better suited for the IT Pro TechNet public. Please ask your question in the Site Web of TechCenter Windows Client for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New installation of Photoshop CC 2015 opening images in the small window square

  I've used photoshop for years.  I recently moved from Photoshop CC 2015 (probably months) on Windows 7 for a new installation of Photoshop CC (last version so just what is the download of this week) on Windows 10.

  (Just a side note, I had saved all my settings via the sync on the old PC.  On the new CC PS, synchronization option is gone, lucky I took screenshots of my settings). So now I have to find my file to workspace on my old hard drive...

  My real question.  I run my PC 100% DPI adjustment.  PS now open each image in a small square window in the upper left corner of the display area of PS.  Specifically, my picture is there with a gray square in addition to this image.  I can make things happen and see my image in this small square. I can't select anything in the window.

  It seems to be in a constant w: h: setting I understand of course is to width height but does not turn off.

  Zoom just zooms the picture in the box.  I tried to change the canvas to something bigger, but who comes to the bigger picture in this little square window.

  Thus, after several searches, I unchecked "use graphics processor", which worked well with windows 7 and the older version of PS.  Then PS crashes... I forced to close, then reopened and PS opens pictures very well, and the graphics processor is always checked. I run a GTX560 with the last driver installed.  I wonder if there has been some changes in treatment or if I need to change my settings "advanced graphics processor.  Just strange would not, and now after unchecking it and magically he re - check, things seem to be working. Until they do not!

  Any thoughts appreciated.  Thank you

  Thank you

  BJBBJB1

  You can also try this

  • Open PS - preferences - performance - audit use graphics processor
  • Now click on advanced settings and change the mode of basic drawing
  • Restart PS and then see if the problem persists.

  Concerning

  Rohit

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• New installation Photoship CS6-Bridge opens not updated after installation.

  New installation Photoship CS6-Bridge opens not updated after installation. What gives? Photoshop œuvres, mini bridge opens but does nothing.

  Hello sinner

  Please refer; http://forums.Adobe.com/message/4522770

• Email records retrieved from a drive Thunderbird crashed. You want to import into my new installation.

  Tried to copy/paste the files recovered in profiles/Mail/Local folders in my new installation, but without success. I can't find an option to import messages from a folder. Any ideas? Thank you!

  Re: tried to copy/paste the files recovered

  Are you sure you are copy/paste the correct data?
  Emails are stored in files mbox, no records.
  MBOX files don't have any extension.

  As an example, in the image below, it states:

  • Inbox (mbox file containing the e-mail)
  • Inbox.MSF (indexing file - no emails)
  • Inbox.SBD (if created subfolders of Inbox. This folder contains more than mbox and indexing of files)

  Note:
  Thunderbird should be closed when copy paste or do anything in profile files.

  There is also an add-on which is pretty good.
  Download downloads folder or desktop.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Install:
  Tools > Addons or Menu icon > Addons
  Click the gear icon and select "install the addon from file".
  Locate the downloaded xpi file and click Open
  You may have to restart Thunderbird.

  Right click on "local folders".
  Select "Importexporttool" > "import a mbox file".
  Select: "import directly one or more mbox files" and click OK
  Find the mbox files, and then click Open.

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• my phone has port and new battery and still will not hold a charge

  my phone has port and new battery and still will not hold a charge

  What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

• New installation of ff15 crashes always in under a minute

  After way too much nagging, I improved a product that worked, ff3.6, one who is not, ff15. It upgraded 3 plugins.
  Now when I open ff, no matter if I try actually use or just sit and look at a blank page, it crashes in about 30 seconds.
  Try to go there, more than 20 times on a new installation!
  Using XP. But this gave me the excuse to try Chrome and I found that it is very stable and much, much faster. And of course, I use Chrome now to send this message.

  OK, I discovered that kdump.dll is also used by Kingsoft PC Doctor. I have disable Kingsoft PC Doctor, and I was able to use Firefox normally.

  I have similar installation in the office where I use Windows 7, so far no problem...

  Microsoft Office installation
  OS: Windows 7 Pro SP1
  FF: 15.01
  Kingsoft PC Doctor 3.7, Antivirus 2012 (Cheetah) SP5.0

  Homepage:
  Windows 7 Home Premium SP1 operating system
  FF: 15.01
  Kingsoft PC Doctor 3.31.9 (with security option construction in)-last

  Since you the Kingsoft has been installed before.

  It thus means that Firefox may have to change its use of kdump.dll

  SB

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• How to set new tabs to the home page when open

  I don't have any setting of the problem to the top of my home page, but open new tabs as blank pages. How to configure Firefox to open new tabs to my homepage, when I opened a new tab manually?

  'Donations' to add-on developers aren't needed. Add-on developers - we appreciate donations of users since they devote their time and efforts for free in order to develop the add - it (s). Donations also help pay the costs of operating a Web site and some have online help forums to help their users with support questions.

  Tab Mix Plus is a great add-on, I use it and love it, but it's a bit 'heavy' / large installation for just a single function. Tab Mix Plus performs several functions related to tabs and have many, many options that you can set related to tabs, including that your request.

  One add-on which is much smaller and intended to perform only one function, opening a tab with the page you specify, is new TabURL:

  • New TabURL: https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
  • After installation and restarting Firefox
    1. Open the options (Add-ons - > Extensions, click Options next to the new TabURL)
    2. Set your options or enter the URL that you want to open in new tabs
    3. Click "Save".

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Function of scrolling of the mouse after a new installation.

  Hello, when I got my laptop (m6 1125dx Envy) I had a nice feature that allowed me to scroll through the pages under the mouse cursor when the page is the subject of a scroll is not the current page. It was great when look a things side by side and comparing elements. Having to click on a window to make it active just to scroll is a pain. This is a default feature in ALL linux distributions and I missed a lot when I'm on windows.

  When I got this laptop windows 8, I found that I had this feature. I was happy to extreally. After awhile, I reloaded my operating system with a new installation of windows 8 and noticed this feature is now gone.

  I installed all the drivers and the software that was in the file "c:\SWetup". I've updated all the drivers from the HP website. Still no scroll mouse of pages under the cursor.

  I know there are applications of third party like katmouse and others who do this, I tried them and they do not seem to work in windows 8.

  It's something that came with the laptop. Can someone give me a helping hand for this feture back?

  ChangedSoul,

  You can enable mouse Hover in two ways:

  Windows key + U (open access) >

  If you have not previously opened the ' Centre

  then

  Uncheck both "always read this section aloud" and "always this section analysis.

  Select / Open "Make the mouse easier to use" >

  Under "Make it easier to manage windows" section >

  CHECK "Activate a window by hovering over it with the mouse.

  Ok

  -----------------------------------------------------------------------------------------------------------------------------------

  Comment

  This method should work, and if this is the case, it will also be enable the development by mouse and POP before the window where you point your mouse.  Frankly, I find it irritating.

  More likely, because you're in the Linux world, looking for likely action "Set mouse without Pop" first defined in Unix all these years and then moved to Linux as the obvious of the window control decent method.  Yes, I'm a little prejudiced, but only a little.  The smile.

  Glide mouse (no window pop) to Windows 8 is easy to configure. It requires a simple registry hack to set the mouse Hover in place.

  Windows key + R > regedit > OK

  Once you have full registry > export a copy of the register to your favorite folder

  Open key HKEY_CURRENT_USER\Control Panel\Mouse

  Change the value of REG_WORD ActiveWindowTracking to 0 × 0000001 (1)

  Open the key HKEY_CURRENT_USER\Control Panel\Desktop

  Change the value REG_BINARY UserPreferencesMask, MSB (most significant byte or the first value in the chain), at 01

  Example:

  The FIRST value of the string can be 41, which displays the front window > change the value 01

  The FIRST value is perhaps 9f > replace the value 01

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  OPTIONAL:

  If you want to slow down the reaction of the constant focus, you can add a delay to the duration of the window to change the focus after the mouse is moved.

  Key HKEY_CURRENT_USER\Control Panel\Desktop

  Change ActiveWindTrkTimeout REG_DWORD > a value you like

  Examples:

  0 × 00000080 (128ms)

  0 × 000000c8 (200ms)

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Save and exit >

  Restart / reboot the system and log on

  Fact!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=