Sleep problem graphics amplifier AW 17 R2 (2015)

Similar Questions

• No full-screen video. Alienware 17 & Graphics amplifier

  I have a problem with my Alienware PC screen and full screen. The Setup is:

  Laptop Alienware 17
  Alienware graphic of the amplifier with a graphics card eVGA GeForce 970 installed.
  4K external display connected via HDMI

  Laptop computer and graphics amplifier aged less than 3 months.

  Problem is that when I go to display full-screen video I can hear the video playback, but the screen goes black. This happens with video 1080 p and 4K video from a source that allows me to go full screen. This includes Windows Player, video YouTube on Chrome, video player GoPro, etc etc. As soon as you go full screen, the screen goes black but video continues to play (you can hear the sound track).

  Any advice? I need to change the setting?

  I had to turn off my chart of hd530. You will need to re-enable it when you use it as just a laptop. Are there drivers for AGA, maybe that would help. It's just *.

• Portege z830-11J - Windows 8 - resume/sleep problems

  Toshiba, help Windows 8 problems with old laptops and Windows 7 computers.
  The problems seem to be hardware related, but I have to contact microsoft.

  Schould where can I go for Windows 8 curriculum vitae/sleep problems with this laptop.
  contact microsoft support would be useful?

  Thank you

  Jürgen

  Hi Jürgen

  I don t think that Microsoft would be able to help you usually the laptop manufacturers are responsible for own products

  If you have any problems regarding the features of the laptop, you will need to contact the maintainer authorized Toshiba in your additional countries, you can call the hotline of Toshiba.

  You can also ask the here community of users for some advice, assistance, etc.

  This Z830-11J is certainly win 8 supported as you can see here the model number in the Win 8 compatibility matrix: http://eu.computers.toshiba-europe.com/innovation/jsp/checkWindows8Compatible.do?service=EU

• HP Spectre13-3010dx sleep problems, Shutdown

  Hello

  I recently bought this ultrabook and I noticed that the sleep and stop functions do not work as expected. Restart works very well.

  Description of the problem

  • When you try to put the computer to sleep, the screen goes black, but the system stays on (lights on the keyboard, the fan spins again). I'm unable to recover from this State unless I make a difficult stop (hold down the power button / stop) or wait 5 minutes, how the computer off simply. This kind of... defeated the purpose of "sleep". Haha.
  • Same thing happens when I stop the laptop - screen turns off, turns on and the fan turned on and unless I turned off by force, laptop remains in a vegetative state for five minutes and then shuts down its own.
  • In both cases, I am unable to recover from the black screen. No response from the computer, regardless of the key combination (Ctrl + Alt + Delete, etc.)

  I dug around here the support forums and noticed other people had issues similar, but on different computer models (i.e., Pavilion, dv6, etc.), so I tried to take these specific solutions to solve my problem, but there has been no result.

  Steps taken to solve the attempt

  • The laptop came with the version of BIOS Insyde F.09, so I updated the version of BIOS to F.13. Does not solve the problem
  • I went into the BIOS and reset all default settings. Still has not solved the problem.
  • I found another thread that the user had the same problem as me, but on a different model specifications. I tried to use their solution to roll back BIOS. However, it has not yet solve the problem.
    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/shut-down-sleep-problem-HP-Pavilion-note... ***

  Note: Problem of this other user has emerged due to a BIOS upgrade, while my computer was delivered to me with this already existing problem.

  From this moment any help would be much appreciated.

  Thank you

  Mike

  ______________________________

  "I'm very much in the idea of genius to be beautiful." -Sean Booth

  Hi all

  I am not convinced that it could not help others, but they gave me a day after I posted this, notification to install updates on my laptop and these updates fixes the problem. I do not know what updates took place, but they work.

  For those who still know the problem, my apologies. I'm not really sure what HP update to solve this problem.

• Close / sleep problem - HP Pavilion Notebook PC 15-e055st

  I have a problem with my laptop HP Pavilion 15, model 15-e055st, I bought two months ago with pre-installed Windows 8. I put tax at the operating system level to Windows 8.1 and seemed to work OK.  Then I used the HP Support Assistant to a few important updates, including BIOS and other software.  Following the HP update, that the computer would not Shut Down or sleep, but restart worked OK. When I try to stop or sleep, the screen goes black but the power light and the wifi of the keyboard light stay lit and the fan still works.  The machine will not this situation without me recover everything first do a hard reset by holding the power button down for five seconds.

  I trıed restore the software to the State before the update of HP but the problem still existed.  Two days ago, I updated the computer, which cancelled the operating system of Windows 8.1 for Windows 8.0 but closing down / sleep problem is still there.

  Can someone help me?

  It worked for me also!

  DaveyK, I'm really very grateful to you for the solution to this problem.  Thank you!

  I now get with some serious computing, until the next bug happens!

• Edge 13 sleep problem win7 (intel)

  Hello

  I think I have a sleep problem with my edge. If I close the lid, I can still hear the hard drive by clicking on current time to time and CPU fan. I checked all the power settings and it should go to sleep and nothing should stop going to sleep. Case may be where the cover he never sleeps, but if I choose sleep from the start menu, it will sleep. And I checked all the places it should go sleep by closing the lid.

  Thing worries me a bit, it is that if I run in prompt command "powercfg - a" he reports this computer only supports the S3 (hybrid sleep) and S1 and S2 modes are not supported.

  Mystery solved:

  HW problem!

  A magnet located in the lower right corner of the cover of the computer, under the screen rectangle shaped box is too low!

  I tried one of my magnets "fridge" on the top of my power button and computer went to sleep state and _stayed_ in mode standby.

  * Sigh * I wonder what I should do to fix this problem? Magnetic tape to improve the weak magnet on my computer?

• Alienware graphics amplifier 452-BBQN vs 9R7XN

  Hello

  I bought a laptop Alienware 17 A3 several months in the United States, then moved to another country.

  Now, I want to buy an amplifier of graphics.

  However, when I look at the graphic amplifier to the United States, the model number is 9R7XN. In the United Kingdom, the model number is 452-BBQN.

  Are these separate products? Alienware have done fashion that one model of the amplifier of graphics?

  Thank you

  Hello

  No, there is only one version of the graphics of Alienware amplifier, but the part number may be different according to regions.

• (Redirected) Upgrade to Windows 10, sleep problems

  I have sleep problems and stop once I've upgraded to Windows 10, the Dell Studio XPS 8100 won't go to sleep. The screen turns off, but the power LED remains lit and fan as well.

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Graphic amplifier purchase options

  So I'm on screen for the customization of Alienware 13 and I want a graphic amplifier to come with her. I clicked on the little bubble next to the amplifier of graphics option and then he said:

  Step 2 (optional): choose only one desktop graphics card to complete your experience.

  I need a very good graphics card so I chose the 1070 GTX, but I noticed that he removed the bubble of the amplifier of graphics option. When I order the laptop it will still come with the amplifier graphic or just the graphics card I bought? Thank you

  It is indeed confusing on the auction site. For now, do not order from here. Restore Dell (1-800-999-3355) Sales Department and ask them to manually create the command. Be very specific all three devices you want =.
  Alienware 13 (with a detailed description of the material you want in it)
  AGA (amplifier graphic Alienware)
  NVIDIA GTX 1070

• X 51 R3 and graphics amplifier - lanes available PCIe?

  I have a X 51 R3 with an i7-6700 inside for a processor, a 960 in the PCIe slot GTX GPU internal and a graph connected with a GTX inside 1080 amplifier. With the GTX installed 960, 960 a 16 lane PCIe available and GPUz shows it connected like this, and the 1080 has only 2 channels available PCIe and shows that it connected like that. When I remove the 960 internal 1080 in the graphic amplifier shows that it is connected via PCIe 3.0 x 4-4 lanes available.

  Why would this be the case? Is there a solution?

  Hello

  The amplifier supports up to x 4. There is a new BIOS from up to fix the x 2 single behavior during its use. Sorry for the inconvenience. Keep control of our main support site, the update will be displayed here.

  Just make sure that you use the version of the driver 368.39.

• Error ' ' system timer was triggered "and hibernation / sleep problem.

  Original title: Hibernation and sleep problem?

  I bought a new laptop of Toshiba C55 series probably a little a month ago and for a while, it was fine, I had no problem. I had some mistakes with what is called a bad pool header, I've not experienced this once again. My main problem is with the sleep and hibernation. I went and disabled any parameter that would be extended automatically to my computer after a short period of time. It is set at only hibernate after like five hours, I'm never away from him that long. I don't want it to hibernate unless I put it specifically put into hibernation. I heard talking about hibernation is hard on your computer. I am usually only away from him for a couple of hours, so it's easier to have it in sleep so I can come back and get the right to return to work or what I was doing. I put it in mode 'sleep' whenever I need to go away for a few hours, for some time, I had no problem, he would go to the mode standby and stay there until I woke it. My problem is that most of the time when I put it in fashion watches, it goes to the hibernate after only a few minutes. WHY would he do that? And how can I stop it? There are times that I put him to sleep and he done as it should. Most of the time, but it goes to the hibernate after a few minutes. I don't want to make this period. Is there a setting I'm missing, I have conflicting settings on something? What is a small problem with Windows 8, or with my computer itself? The last thing I want to do is to restore it to factory settings and lost all the things that I have saved and have to reinstall my programs again.

  There is also something else showing in my event viewer I've ever seen before. That means when he says "system timer was triggered." And can someone tell me what means the bad pool header error and how to fix it?

  I found a solution, I noticed when I Hibernate the computer at night to go to bed is when it remains not in mode 'sleep'. I stopped it in hibernation at all now and it says in the mode "sleep" very well.

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• Problem download active in Dreamweaver CC 2015

  Nice day

  I have a big problem. I bought Adobe Dreamweaver 2015 and downloaded. So far so good!

  Then I started the tutorial on Youtube to make my first site in DW.

  It is sad that I had to download active files in the tutorial.

  I tried everything, but I can't find the button.

  I can't work now.

  Help, please!

  Best regards

  Yvonne

  (Netherlands)

  I think that you will find what you are looking for on this page.

  How to make and the style of a web page in Dreamweaver. Adobe Dreamweaver CC tutorials

• Dell U2715H as second monitor sleep problem

  I just bought a Dell U2715H monitor to connect to my iMac 27 "mid-2010.

  Implementation, the system works beautifully. Plug n play, as we are accustomed to the Apple universe.

  But after an automatic start, this morning, the Dell remained black, what I tried.

  A phone call with the helpdesk Dell did not bring a solution; they are willing to trade for a new monitor, but I think not (just a feeling) which will tackle the problem.

  After having a cup of coffee, I came back to my Mac, who had fallen asleep in the meantime.

  Pressing a button all of life, including (surprise) the Dell monitor system.

  After a few experiences, I discovered that after a reboot, the Dell remains black.

  Put the system to sleep (using a hot corner) and pressing a key is not wake up the Dell.

  Bringing the system to sleep and pressing a button after waiting 10-20 seconds, puts the entire system, including the Dell monitor.

  The monitor is connected to a mid 2010 iMac 27 "2.93 GHz Intel Core i7, with a miniDP to DP cable.

  Although I found this 'solution' after hours of frustrating attempts, it feels a bit inadequate.

  Anyone who is familiar with this problem who found a more definitive solution?

  Reset the SMC of the iMac, as in > reset the management system (SCM) controller on your Mac - Apple Support

  and discover > get help with graphics issues on external displays connected to your Mac - Apple Support

• 15-P152NU Pavilion: Pavilion/closed sleep problem

  Hello everyone! I write for the first time and I hope I do it in the right section.
  So, I recently bought a new 15-P152NU Pavilion and it is great but there is a very annoying problem right from the beginning that drives me crazy I tried almost everything I might have found on the Internet and still found no solution. So my problem is this - when I use the laptop for periods of solitaire (over an hour) it won't go to sleep or off. When I try to do a stop/standby the screen would turn black and the cover and the fan would stay. What I noticed is that if I try to shutdown/sleep when I used it for periods short (10-20 minutes), it would be nice and the fan and the cover would be turned off. But otherwise they would stay and my copmputer essentially dies and I have to press on and hold the power button and then start all over to get to the race. I tried to leave it any longer (I left it overnight) - without success. I don't know either it is based on the temperature of the cpu or a process which starts after a certain period of time, but I was really tired so I hope that I find a solution here. What I've tried so far is:
  
  -Adjust the advanced settings in Power Options.
  -Disable Hibernation
  -Update/restore Intel HD Graphics Family and almost all drivers which could be updated / restored.
  -Run the troubleshooter in Windows
  -Disable Boot (Restart) fast
  -Looking for a process that interrupts sleep and stopping by using powercfg-queries. All say no
  -Looked for a setting in the BIOS that could prevent the stop/standby - found nothing related...
  
  I'm really tired of this so I'll be looking forward to your answers. Hope someone can help me.

  Hello, @Sparkles1,.
  
  And thanks for the reply to my post. Fortunately, I managed to solve the problem. I found a solution after a long reading on the Internet. You, it might be useful for other users, I will share it than what has worked for me.
  
  1. go in Control Panel -> Device Manager
  2. expand System devices
  3. find Intel (R) Management Engine interface -> right click-> properties-> driver

  4. check the driver version. If 11.x.x.x , you'll probably face my problem.

  5. uninstall the driver. Restart your computer.
  6. download the old driver (version 9.5.15.1730 5 M) by https://downloadcenter.intel.com/search?keyword=intel+management+engine and install it. Reboot if requested.
  
  That's all. This did the trick for me. I hope it will be useful for other users too.
  
  I'm sorry I didn't post my solution earlier, but I had completely forgotten that I had posted here. Anyway thanks for your reply. I think that the forums of HP is an amazing place.
  
  Happy holidays!
  
  Krasimir Shontov