Slideshows and triggers

Similar Questions

• SDDM 4.10.866 - sequences and triggers

  Is the automatic creation of triggers and known to operate in 4.10.866 sequences.

  Logic model has an ID.

  I have templates for relaxation and sequence set at the level of physics/preferences/Oracle.

  Model relational column is set to global autoincrement.

  I have no name of sequence or a trigger generated

  When I add a physical model, I don't see any sequences or triggers generated.

  Simon

  Ah ok.

  I thought that the physical model would be the lower level representation of what would be generated automatically as the DDL output.

  I generated successfully all the required sequences and triggers by changing the relational model.

  Thanks for your help.

• Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  As slideshow in Muse Widgets can contain images, it is not possible to place another slide show within a slide show.

  However, you can achieve the desired effect by placing a slideshow inside a widget of composition. The widget of composition also offers lightbox, as well as the possibility of placing any content within their target containers (similar to the hero of the slideshow Image).

  Hope that helps.

  See you soon,.

  Vikas

• I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  Hello

  In slideshow options, please enable 'Show lightbox parts while editing', under the editing section.

  Thank you

  Sanjit

• DAQmx generating triggers TTL and triggered read it

  I am running LabVIEW 2013 on a Windows 7 PC and I use a card PCI-6251 DAQ with a BNC-2110.

  For my application, I need to generate triggers TTL (for example, with a frequency of 1 Hz). At the same time, I need to run data to HAVE which is triggered by the same TTL signal.

  So far I managed to implement the TTL square signal properly with a spot of meter output - I can see the triggers on a scope. I also have a task of entry of HAVE and included a digital triggering. He works in part, and I have a few questions:

  • The physical channel of triggering TTL is set to ctr0. This seems to be associated with the PFI12. I rather would specify the terminals directly in my program - is it possible? The ctr0 is not labeled directly on the BNC-2110.
  • The task of IT is triggered by the PFI0. I connect a cable from PFI12 to PFI0. Is this really necessary? The task of the AI can be triggered internally for the same counter? My external hardware must be triggered with the same signal as the acquisition. So far, my solution seems to be the only way I can make it work.
  • Digital triggering for the task to HAVE it is configured to 'rising edge' trigger. However, when I run the task to HAVE it continuously in a loop, it seems that it is triggered Alternatively edge bearish and bullish. I checked this by connecting the meter to exit on PFI12 directly to the input string for the task to HAVE it, and I observe that the periodic square wave changes sign. Why is this? It is a problem for my application - I need to be able to always trigger on this same Board.

  Thank you very much for your help.

  hmalissa:

  You can query programmatically for the pulse of a task of the meter output terminal using a property DAQmx channel node.  Here is an excerpt.  Just save the image and drag the file into a LabVIEW block diagrom and turns it into code.   You do not have to use this as a Subvi, controls & indicators are just there to identify the task who is who.

  

  Bob: interesting experience.  But to help future readers to draw the erroneous conclusion, I just would insist that a timed hardware task still * fact * produce much more repeatable calendar timed sample a software task programmed in a software loop.  Example of Bob is not address the regularity of the individual sample interval, just by comparing the driver DAQmx or MS Windows timer is more sensitive (and repeatable) to marking the end of an interval of 1000 msec.

  -Kevin P

• Windows Update Failed and triggers system reboot

  Hello

  Every 10 minutes, the update triggers windows to restart the computer.

  I tried to download the updates failed, but when tried to install it, I get a message that already exist.

  I deleted the update history. Problem still persists.

  I searched through the community, but could not find a method to solve the problem.

  Also, I tried to restore the system, even that does not work because of the 0x80071A91 error code

  "Support for transactions in the specified resource manager is not started closed because of an error"

  Help, please.

  Arun

  Hello Arun,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are facing problems with system restore and Windows updates on your Windows 7 machine. I will definitely help you to solve this problem.

  This problem may occur because of the corruption of Windows files. I suggest you follow the instructions provided by Amrita M replied on April 26, 2010 in the below mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/transaction-support-within-the-specified-resource/fba64f34-4c16-4551-82d7-f22169be0d97

  In addition, follow the steps mentioned below and check if this is useful:

  Method 1 : Run the Windows Update troubleshooting tool

  Try to run the Windows Update troubleshooting, it will detect and solve the most common problems with the updates of Windows. To do this, follow the link below. You can also follow other common solutions on the same items.

  https://support.Microsoft.com/en-us/GP/Windows-Update-issues

  Try Method 2, if the problem persists

  Method 2 : Components reset Windows Update

  If the problem is with the Windows Components update, this method will solve the problem by repairing all the components associated with it. Click on the link below and follow the article on the same.

  How to reset Windows Update components?

  https://support.Microsoft.com/en-us/KB/971058

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For moreinformation on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Widgets and triggers

  I need help how to change the child-parent relationship of triggers, those who change from one to the other windows in the same page, I just need to reorganize so that comes first is a different window.

  Hi dylanf95215778,

  I think you are using a widget slide show here.

  If Yes, then simply enable thumbnails of the widget settings, and then you can just drag the thumbnail icons and place them in the required locations.

  later, you can disable the thumbnails.

  Thank you

  Ankush

• I don't think that it is possible to edit a slideshow and accompanying miniature and legend/labels through in the edition of the browser. Someone else what wants?

  Does anyone besides me see this as a new useful feature? Not sure that's possible...

  You can edit the images of heroes of the slideshow with the photos and captions through browser Edition. Are you facing any problem when editing those?

  Please provide details and screenshots that will help us identify the problem.

  Thank you

  Sanjit

• Actions and triggers does not not in Edge

  I use Edge animate CC on Mac OS 10.9.5.  Triggers and Actions Windows appear different from that in the tutorials, and when I do my information selections are not preserved.  When I opened the window the code I inserted isn't there anymore.  The animation does not work when I import my file OAM in Muse.  What does it mean to 'Choose a target' in the window?  And what I have to do?  The only option available is "step".

  There are 3 images involved in my animation.  Can I use the triggers in the timeline panel or supports "Open stock" in the properties panel?

  Yes, your comments are correct, the Actions panel is different than previous versions.

  To ensure that the action is applied to the desired handler (click, mouseover, etc..) double click on the item "Pick A target" in the last part. See capture. Then add it as code in the Actions Panel.

  

  Choose a target means essentially that you are "TARGETING" the element, specifically, who will be the recipient of the action handler (choose an Action). No guesswork involved, as it was in previous versions.

  HTH

  Darrell

• How to purge a file photo slideshow and replace

  I tried to replace my photo slideshow Adobe Muse file and replace it with a new one. I thought that when I added the new file, the previous photo file would be replaced. However, it only added to the existing file. How do I purge the original file, so that I can replace it with something totally new?

  Hello

  Below are the steps to remove an image of the slide show.

  If the thmbnails of the slideshow is not visible:

  • Go to 'Options' of the slide show and check "Thumbnails" (this will make the thumbnails of all the images in a slideshow visible)
  • Select the thumbnail of the image you want to delete and press the "Delete" button on the keyboard.
  • Once done once again return to slide show options and uncheck "thumbnails."

  If slide show tumbnails is visible then simply select the desired thumbnail and then delete.

  Concerning

  Vivek

• Widget slideshow and Composition Widget synchronization problem

  I have a slide show with pictures and the widget of the composition of the text that corresponds to each slide. The parameters are the same for both, works very well on desktop even on versions of the Tablet and iphone, they are messy.

  Here is the site of BC: dezinegirl

  I've been waiting for the customer via Chat to figure it out by looking at my files, but it has been an hour and I don't think he knows.

  Does anyone else have this problem?

  BTW: I work with a model purchased.

  Thank you!

  Hi Pam,.

  Instead of using the widget slideshow in synchronization with the widget of the composition, I will propose that you pass to the use of a widget of composition. Slideshow widgets does not block of text but widgets of composition allows to images as well as text blocks. So you can allocate individual blocks of text for each target and that should give you the effect you're looking for without any problems of synchronization.

  Let me know if you need more information on this.

  - Abhishek Maurya

• Reposition the Image in the slideshow (and more)?

  Hello! I am a new user of CC of Muse, and I have some questions about some elements of the home page (for now).

  1. I used the widget slideshow by default to create a slideshow of base that spans the width of my page (1024 px), but is only about 200 px (or almost) in height. When I place images for the slideshow, is there somehow I can (without having to buy another third-party widget) can reposition an image in this area fixed? I don't want to "Fill the content proportionally" because I don't want the photo in the original scale - I just want to reposition the image (so that you can see "key" elements - that is, the face of the subject, not their left arm) in this problem area I created.

  2. is it possible for me to add a line to a hypertext link color? On top of the image, I have a hyperlink that leads to another page on my site. The face of the police of the hyperlink is white, but, of course, it is difficult to read when it is overlaid on top of the image. I can add a color contour (i.e. black) to compensate for this white?

  3. How can I create a header 'fixed' (which includes my navigation bar, social media buttons, etc.) which appears on the top of every new page I create? I'm getting around him now, but simply copy-ing and then 'paste in Place' on every page, but is there a more, eh, ' solution '?

  Thank you very much!

  About question 1., it is best to crop your image using a program like Photoshop image editing to show you exactly what you need.

  Muse allows you to anchor the image left, right, Center, etc. using the Position icon in the menu filling, but it was not designed to be a fine listen that you need it to be.

  

  For question 2, if you use a text link in Muse, you can access the properties of file/Site then click on the button content to change your connection preferences.

  

  About question 3, a fixed header, here's a video tutorial on what you want to achieve.

  Create some headers and footers. Learn Adobe Muse CC | Adobe TV

• Looking for a good method to 'hide' video and triggered by button.

  I have 4 videos I want on the same page, that will play full screen. They will be triggered with buttons, but I want to hide the video so that it cannot be triggered accidentally by tapping on the space where the framework is available. Can I just resize the image to a really tiny image size and still cause to be full screen? There is no image of the poster, so you can't 'see' video on the presentation in the content viewer, but if you happen to use space where is the video, it starts to play. I tried to put one empty block on others, as well as a frame filled with an opacity of 0% and neither prevents the video of a trigger on tap.

  Shrink the 1px x 1px videos and displays the value None. Place one

  button on them with one go to url action the navto://nul value.

  Bob

• Function procedures and triggers

  Sorry to ask this question,
  
  
  In oracle. We use the function of triggers and procedures.
  
  for example:
  
  If we wrote a trigger for a table. It fires both to manipulate the table. (database table contains data and database also contains triggers the same function, procedure).
  
  but my questions?: is
  
  In my database, I have not kept only tables. No trigger, no function, no procedures. and
  
  
  I kept this triggers, function, procedures of data instead of I want kept this function, triggers, procedures in layers of logic (intermediate level)
  
  is it possible? .
  
  
  If yes means, how to write or where to write? Please help me, otherwise send guidance documents or the blog releated to it.

  Hi Marie Laura,.
  If you want to call the procedures used the following link
  http://www.techartifact.com/blogs/2009/04/procedure-calling-in-Oracle-ADF.html

  for my statement

  all logic, triggers can be done using java classes that is attached with the business objects.

  This means... in the procedure, you have selection, insertion, updating, and deleting of records in a table...
  So map complete things as an object adf...

  Tables-> object EO
  Select the statement - > VO objects
  Insert, update, deletion - crud-> dodML() operation, the remove() method in EntityImpl
  commit - dbTransaction.commit)
  other features... are also can be mapped to specific files, and can be represented as objects adf...

  That's what I wanted to say, convert the whole procedure into objects of the adf and work on...
  I hope you understand now...

• Slideshow and multi-project

  Windows 7 and CS4 Production Premium, LR3, and Acrobat X.

  Yet CS4:

  Project 'A': Slide show on DVD. Put in place the project (Encore CS4) with a main selection menu to allow the DVD Viewer to select manual advance or complete (all the). I was able to have a draft manual and a project for everyone, but not as a single project. For 'manual' selection, clock menu appears explaining the use of the buttons of the remote control chapter (| < <- and -> > |) to change the slides and a return to the main selection menu is done with the remote control title button. To select 'all', the full slideshow starts directly from the main menu. New title refers to this menu. When you run the operations of 'all', each slide should have a different required duration.

  Q1: Any suggestions on how to make a project for both?

  Project 'B': 'A' but must assign different audio clips based on slides. Some slides are photographs of the group. It is impossible to attempt a textual description of the individuals of the Group on the overlay image. You will need to provide a sound description of individuals at the beginning of the slide and either Cup on advance manual next/previous slide or have the slide duration equal length audio for the selection of the menu main 'all '. The ideal would be not only have the ability to have each slide to have its own audio clip but to have another audio track to play all the show length with possibility to moderate or stop the entire audio when play audio clip of the slide.

  QB1: Does not appear any product Adobe supports this feature for slideshows (still or Lightroom). Did I miss something?

  QB2: If I have missed something (QB1), anyone have any suggestions on a product to use?

  Project 'C': It is a General for slideshows or presentations of video DVD. I have two slide show projects: it has its own selection menu 'Hand' to select 'auto' advance in a sequence of slides of trips and on the other, a menu to select manual advance for a set of scrapbook pages (each page a slide). Then say a video project with its own menu 'main' to select the chapters or subtitles for this sequence. Each project is running about 4 or 5 minutes.

  QC1: Is it possible to have a menu 'master' to allow a DVD player select the first menu of each project? That would be good because it allows a more efficient use of DVD media.

  On page 119 of the user manual, there is a note that there is a maximum of 99 slides per slideshow.

  Right; just create a slideshow of 99 (or less) and put the r is in a separate slide show.  End of slide show action 1 is to go to slide show 2.  If this pair of slideshows is each put to manual advance, you can create an another two slide shows and make auto advance, etc.

  Your answer to the 'C' project, it seems I can have several slideshows by project as several video tracks in Premier Pro.

  A chronology in still more like a sequence in the first.  And you can have several sequences in the first and several deadlines in yet.  (Given again, there a limit of 99 chronologies by project and 99 chapters by chronology - which is also part of the 99 slides per slideshow.) And Yes, you can combine several calendars and slideshows in a project.