Slimline Office 450 - A24: computer USB ports to slimline addition of office

Similar Questions

• Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

  Very well - so a few days ago (Saturday ~ 2) (25. 2012) I connected to my XBOX 360 (Wired) controller on my Toshiba Satellite L655 computer laptop with Windows 7 ~ Home Premium 64-Bit. To my surprise, a Notification bubble popped up from the taskbar, saying that the "unrecognized USB device. It has malfunctioned. "

  Naturally, I took, waited a few seconds, and then reconnect the USB key. The same message has popped up. Now, I was angry. Repeatedly, I took and reconnected it all a few seconds until that FINALLY the 4 green lights around the button Guide everything illuminated and then back except the one on the upper left, which was the way it should have been.
  I went to the control panel and clicked on the 360 controller to see if he had any input. Nope.
  I pulled out once more, has waited a while and plugged in. No, lucky. The same thing happened again. The Notification bubble came, all 4 green lights on and then all four of them died. I don't know what happened.
  When I plugged the controller to the laptop the FIRST FULL TIME, he installed all necessary drivers in less than a minute and I was on my way. Every time after that, I have taken the controller into the USB Port and began to play. Now all the time, that is to say that it cannot recognize the controller?
  I've tried everything, even a system restore. Nothing did. I've uninstalled and reinstalled the drivers for a few minutes, there was an entry of the controller, then he went just blank.
  I need this controller in order to play my racing games, seeing the keyboard control just aren't the best. I don't know what the problem is, but I wish I had a solution A.S.A.P. Please, Microsoft, please. Help me!
                                                                                                                          
  
  
  
  

  I had the same problem, cannot find a solution that worked everywhere, including Microsoft support forums.

  About to give up, I remembered the old cure NDA, shaped, "why not?"  I've tried everything else. "So I've disconnected everything on the gamepad, blew in every connection and reconnected everything, by ensuring that the connections were tight.

  It has worked perfectly since then.

• Not enabled on the computer USb port

  Original title: salvation
  then the port usb are enabled but they do not appear on my computer

  Hello

  1. are you facing problems with the connection of USB devices to the computer?

  2. you receive an error message when you try to connect the USB device to the computer?

  I suggest that you try the troubleshooting provided in the link below steps.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• my computer crashes when I plug in my memory stick webcam into a USB port

  I just brought a logitech C100 webcam and a tick of memoery EMTEC 4 GB two USB. as soon as I Plug one of them in ports USB of the computer crashes with blue screen horrible?

  Hi Keith,

  You are able to use the computer USB ports normally when you connect to another (other than the one you mentioned) key-USB/Flash USB? Try to update the drivers for the chipset of your computer. Also provide more information on your computer on its brand, model and if it has been recently formatted.

  I hope this helps.

• HP Envy Office 700-070d USB Port short Circuit

  Hello everyone. I need help here. My friend runs accidentally shorted USB port using a USB 2.0 cable. Very probably he pinched the cables and so the 5V and ground were short shorted.

  so the CPU is now unable to turn it on. When I press the button, the motherboard ON and OFF several times and product by clicking on / rattling sound which is terribly noisy.

  so when we asked a computer service repairman to check on our PC, it told us there is no problem with the PSU, but the problem is with the motherboard.

  As we do not have the expertise in computer hardware troubleshooting, I would ask your opinion in this regard. He said the charge will be around MYR450 (USD140) so I think that it is quite expensive, if that is the amount that we will pay.

  Any advice on that? the PC is still under warranty (expiration date 2016-08-03). So is it possible I can hp services provider to fix this?

  Hello @Yazidapple ,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand a friend of your chips on your HP computer USB port and it caused damage to your motherboard. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

  I want to thank you for display on the HP Forums. Have a great day!

• Qosmio F60 - USB ports stopped when I'm with them

  H ? !

  I have a problem on my Qosmio F60. I opened my computer after 30 or 40 minutes firstly, 2nd and 3rd usb ports stopped after 5 minutes 1 usb port stopped and I can't use them. When I started my active computer, usb ports and they start working.

  I checked my power plans and no problem with them. I think that the heat of my computer too well maybe, I'm not good. Can help you me with the usb ports on my computer. Show

  Hey,.

  I put t think that the problem is related to overheating. If the USB ports stop working I think that it s a software or driver problem

  In your case I would remove all the USB ports on the Device Manager and restart your computer. The ports will be recognized again, and then test you its operation.

• Cracked screen and faulty USB ports on Satellite A105-S1014

  On my Satellite A105-S1014 screen is cracked and needs to be replaced. How much cost could replace the screen?

  In addition, my phone and USB ports do not work properly. This problem arise well before that I accidentally cracked the screen. Some times when I turn first of all the computer, USB port and telephone ports work for awhile and then after a period of time ranging from a few minutes to several hours, they badly run simultaneously and the computer says that what is in the USB port does not work and that there is no dial tone in the phone port that I use to access dial-up. At the beginning, I don't have this problem with the Toshiba laptop, but it arises after about three months.

  My warranty has expired. How much it could cost to solve the problem of the phone and USB ports?

  Hey Buddy,
  I can't tell you how much would it cost to fix these two things, but I can tell you that you buy rather a new machine because the display and motherboard are the most expensive parts in your machine. Since your ports USB and your RJ11 (phone port) don't work anymore and this stuff is on the motherboard, I guess you have to swap the motherboard, too.

  I suggest you to sell your machine @ ebay and buy another. It would be too expensive to fix your machine. Believe me, I had a case of simiar and parts cost more then buy a new machine that was more recent and better performance.

  Just my opinion and just a thought for you... :)

  Welcome them

• USB Port driver problems

  Windows XP Professional will not recognize my key USB flash drive in the USB ports before; However, it does not recognize the flash drive in the back USB ports of the Tower pc which is very annoying. How can I get the drive J it is called on the front USB port of the tower to recognize my flash drive? I want so that it can detect the flash drive as soon as I insert it into the front USB port. In addition, the front USB does not detect my Ipod USB port or USB digital camera.

  Sometimes the front USB ports are not yet connected, so it's good to open the suitcase and check. Sometimes these ports on the motherboard just died, especially if the computer is old.

  Have the ports before does not work, is a very common problem that can have various reasons:

  http://www.Google.com/#hl=en&source=HP&q=front+USB+ports+not+working&AQ=0&AQI=G10&OQ=front+USB+por&FP=be5ffa94030d2d34

  Unfortunately, it will be difficult for someone who is not practical with the computer to help effectively. It's strictly a hardware problem and nothing to do with Windows.

  A good solution is to buy a USB hub (I prefer those motorized), attach it to a rear USB port, but do it right from the start where it provides additional ports are easily accessible. USB hubs are not terribly expensive, around $ 25-30 for a motor home. MS - MVP - Elephant Boy computers - don't panic!

• HP SlimLine 450 - A24: Add an expansion card 4 ports USB 3.0 PCIe to a HP 450 - A24

  Hi, new to the forum.

  I have a HP Slimline 450 - A24 and would like to know if it is possible to install a port 4 USB 3.0 PCIe expansion card?  All I could find is that the expansion port was used. Is it possible to add even 4 port USB 3.0 PCIe expansion card?

  Thanks fror your help

  Hi @gulwing1,

  That the Forums are with you! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on your system and whether it is possible to put a 4-port USB 3.0 PCIe card. I'm happy to give you a helping hand with this.

  Looking at the HP Slimline 450 - a24 Desktop PC product specificationsand HP and Compaq Desktop PCs - specifications (P-nutmeg nuts) of the motherboard, System Board lists no matter what expansion slot at all.  With this in mind, you cannot use a PCIe card in this system.

  It is unfortunately not the news you wanted, but answering your question. Please mark this message as a solution. Bravo would be appreciated as well.

  .

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• 700 - 060ea Office: stop the usb ports go to sleep when the rest of the PC

  When I get my laptop connected via usb, the system constantly charge the phone when the pc is asleep. Have you tried to uncheck "allow the computer to turn off this device to save power" in the Control Panel/Device Manager/USB controllers/Properties tab, but the ports still off. I saw my present mobile on this hub have obtained the correct material. I would have preferred that the PC continues to sleep when it is inactive, but want the mobile to continue loading.

  Should I change something in the BIOS maybe? If so, how can I access BIOS for this model?

  Thank you in advance.

  Hello @tomsy,

  I read your post on how the USB ports on your computer constantly power when the rest of your system enters mode 'sleep', and you need to avoid this. I'd be happy to help you in this case!

  In order to maintain your USB ports power while your computer sleeps, your office should be equipped with a High Powered USB port. It also allows to load when your office is completely turned off.

  According to the Specifications of the product from your desktop, High Powered USB is not available on your system.

  I hope this helps!

  Best regards

• Example: Pavl'ln Slimline s5-1: Front USB Ports NOT working

  Really need help from the experts here - model desktop HP Pavilion Slimline s5-1: H2M46AA (a Joshua motherboard with H61 Intel Chipset) crashed hard drive and have no original driver. Clean install of Win7 Home Premium SP1. Everything is OK except other devices, Universal Serial Bus (USB) bus controller. Driver is not found. After installing Win7, installed an ethernet driver and the original files Chipset installed HP Web site. All drivers OK except the foregoing who apparently controls USB ports before 2 which did not. Then, installed all updates provided by Windows Update. USB ports before always inoperative. They worked before the new Win7. After much research, unusable before USB ports seems to be a common problem, but none of the planned solutions help (check that the cables, turn off completely, Intel Driver Update Utility, etc.). On my system, the first of the 4 ID material for this device shows as: PCI\VEN_104C & DEV_8241 & SUBSYS_2ADA103C & REV_02. According to pcidatabase.com, this is identified as: "Texas Instruments USB 3.0 XHCI Host Controller" and therefore a possible problem. The ports are, I believe, USB 2.0 and not 3.0 according to Joshua documentation (http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000525 see also "\windows\inf\setupapi.dev.log" shows there is no files on the drive associated with the ID of the above material because they are not found during the installation of the driver.) So the question: How can I get these ports USB works - have installed to each HP update recommended for this system. I'm puzzled!

  You're right, it's just an update of the driver, but I think that this is specified, you can see the technique of reference:

  FTP://FTP.HP.com/pub/SoftPaq/sp70501-71000/sp70786.html

  TITLE: Texas Instruments USB Controller Driver Update
  
  VERSION: 1.12.25.0 REV: A PASS: 2
  DESCRIPTION:
  This package provides the driver for the Texas Instruments XHCI update
  Solutions of controller in the supported models that are running a service supported
  System.
  
  PURPOSE: Routine
  SOFTPAQ FILE NAME: SP70786.exe
  SOFTPAQ MD5: 9bd312c3c424161a6c3357d260dcf939
  REPLACES: SP59644
  ENTRY INTO force: 6 March 2015
  CATEGORY: Driver-Chipset
  SSM supported: No.
  
  PRODUCT TYPE (S):
  Desktop computers
  
  MODEL OF PRODUCT MATERIAL (S):
  HP Pavilion HPE h8-1xxx PC
  Desktop computer HP Pavilion p6-XXXX (Joshua)
  Desktop HP Pavilion p7-XXXX
  HP Pavilion Slimline s5-XXXX
  HP Pavilion p6 PC
  HP Pavilion HPE h9-1xxx Phoenix PC
  HP Pavilion Slimline s5-1xxx PC

• I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP

  I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.

  O/S

  Windows XP Pro 32-Bit

  CENTRAL PROCESSING UNIT

  Intel Pentium 4 2.80 GHz

  Motherboard

  Manufacturer - Eveshamvale.

  Vend. ATI chipset.

  Chipset model - ID5833.

  Model Southbridge - SB200

  The downloaded manual provides the following information

  Model = P4SBA

  = North Bridge chipset; SiS 651 - South Bridge SiS 962

  CPU = Supports Socket 478 - Supports 400/533 MHz FSB

  I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.

  Hi Graham,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, the USB ports don't work on Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  Method 1

  Run this fix - it and check if it helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• USB ports for a computer to flag a6750t does not

  None of the USB ports on my computer a6750t Pavilion are recognized by the Windows Vista operating system.  Here are things I tried to correct the problem.

  1. Updated the driver. This is the message I get when you try to update the drivers.
  2. Uninstall devices
  3. Restore the system in time
  4. Downloaded and installed the "Chipset Intel Original pilot" from the HP site.

  Does anyone have a recommendation on what to do to recover the USB drives?

  The only items that should be uninstalled were the ones called 'USB hub root'.  This is the driver that you need to install.

  If this does not resolve your problem, I suggest making a backup of your personal data and do a system restore.  Here's aguide to help the recovery.

  Please click on "BRAVO Star" if I helped you and click on "Accept as Solution" If your problem is resolved.