I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP

Similar Questions

• ProDesk 600 MT: all the usb port disabled after startup Win7

  Hello world

  I just brought a few ProDesk 600 MT after that the installation operating system, one of them seems locked all the usb port after the boot of win7.

  Can I use keyboard and mouse during startup, including the bios or windows safe mode selection menu. However, once started to win7, all usb port are disabled, not even power supply. Which means no keyboard, no mouse. I can't do anything else until the eve of the computer by push and hold button / stop.

  Anyone know why and how to solve this problem?

  Thank you

  Alan

  Hi, Alan:

  See if the news on the thread below solves the problem, if your PC is chipset Skylake.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/can-not-install-Windows-7-on-new-600-G2/m-p/5822964/highlight/true#M130817

• After a reboot, none of the usb ports work and USB problems-uninstalled USB Ports

  I just bought a Seagate external drive, but none of my usb ports work. I looked into it and followed what it says on the uninstall of my USB ports, bad move on my part. Now, after a reboot, no usb port works, I've tried all microsoft support said to do and nothing seems to work. I think I need to reinstall my usb root hub? Perhaps, but I can't seem to find anyway to do. Help, please!

  Hello

  Check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the USB key and expand the drive, double-click the sub element to check if an error message or error code is listed.

  If there is no error message highlight Bus USB controllers and then click Action select check for material changes.

  You can check the link below: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

• Where are all the USB ports on a TouchSmart all in one? I can only find 2 on the left side

  I have a HP TouchSmart all in a (1315xt-600) and can find 2 of the 5 USB ports.  There are 2 located on the side left of the screen, but cannot find the other 3.  Anyone know how to access?

  paula407 wrote: thanks a lot for the info.  Another question, about the description I got for my computer, it say I: 6-in-1 memory card reader, 5 total USB, audio.   That's why I thought I had 5 USB ports.  Can you explain what that means?

  Hello paula407, the 6 in 1 card reader shows there: cards 6-in-1 Reader + 2 USB + 1 taken line-in

  This suggests that the card reader has only two USB ports on the front of the system and the other USB ports would be on the back or side of the system.

• LaserJet P1102w, why not install it via the USB port on a second system to dual boot Windows XP/Windows XP?

  A seriously paralyzed malware on my laptop Dell Inspiron 1318 running Windows XP Professional SP3 with 3 GB of memory. Some key files have been deleted, and I can't open all .lnk files. After some research, my solution was to start from a clean format. However, I have some programs on the old system that I really need and impossible to reinstall on a new system. So, I chose to install a new WinXP as a dual boot on a separate partition (I have also a third partition that I use for user files); keep the old system for when I really need.

  After installing the new WinXP, the detector material caused my LaserJet P1102W printer install pop up box. I was busy to install other drivers at the time so I canceled the installation of the printer later. When I came back to him, he went for the bulk of the fine saves but then abruptly stopped, saying: "the printer installation failed. On the HP site, I went through all the HP printer Diagnostics steps without good results.

  I really want to get this printer working on my new system. What can I do?

  No problem. Since you are the author of the post, you should see a black button with "Accept as Solution" next to the reply button. If you don't see it, make sure that you are connected and try again. If still can't get it, you can click the link inappropriate content report and ask the moderators to mark the solution for you. Hope that helps.

• I have a printer HP (part of the package with the computer) which will connect via the USB port is no longer in my office. He has worked previously so, any ideas on how I can get it to work again?

  While I do not know there have been changes to the system (updates and so on), I don't know what modifications have been made or that one; If any, may be the cause of the problem. Compound that with, I can't get back far enough to get to the last time that I used this printer with this computer and it is a puzzle all around.

  Let me know what additional information as appropriate, you need, maybe the way to collect (if it is not something that I already know how to do) and we'll see if we can get these papers start college again.
  System: HP p6604y Windows 7 Home Premium 64-bit
  Processor: AMD Athlon II X 2 220 processor 2.80 GHz
  6,00 GB (5.75 GB usable) memory
  The printer is HP Deskjet 3000 J310.

  Hi Michael,

  1. What is the error you get all trying to connect to the printer?

  2. the printer works properly when connected to another computer?

  3 is. the computer able to recognize any other usb device?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Additional information.

  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers

  Install a printer: http://windows.microsoft.com/en-us/windows7/install-a-printer

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• I have aspire computer desktop M3920 and all my USB ports at the front do not work any more :(HELP

  OK, so all the USB ports worked very well, but a yellow exclamation appeared recently on ( ) Intel (r) 6 Series/C200 Series Chipset Family controller USB - 1 26 improved host) in the Device Manager, and my PC has no pop up any USB device I plug, so I uninstalled to reinstall it to try to solve the problem. but now I'm stuck and couldn't get them to work again

  Any help or info would be appreciated.

  I could try to reinstall the driver from the Chipset for the M3920 see if that helps. Link to the driver

  After that it gets a little tricky and I must recommend that you backup your data and do a recovery.

  Thank you
  Cory

• HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

  I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

  Hello

  Your machine IS not card reader. His record:

  http://support.HP.com/au-en/document/c04420347

  which indicates:

  External ports:

  • Multi format digital card reader for Secure Digital cards
  • 2 superSpeed USB 3.0
  • 1 bus (USB) 2.0 universal series
  • 1 HDMI
  • 1 PORT RJ-45 (LAN)
  • 1 plug headphone-out/microphone-in the drop-down list

  Location:

  

  Everything you need: download Driver Realtek card reader and install it on your computer.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

  For your question: all the USB ports work?

  Kind regards.

• Satellite L - a single USB port works

  Hello

  I've had this laptop for a few months and I could not do all the USB ports work, the system recognizes all the but work alone. If I check the system it says ports are working properly and that it has the latest driver but when I do anything, a mouse, USB KEY, connect headsets to listen nothing, only one of the ports to recognize hardware.

  Can someone help me?

  Hi alecarrill63,

  It would be interesting to know what laptop you have exactly and what operating system you are using.
  Can you post this important information?

  In your case, I will try to update the Web from Toshiba site chipset driver

  But theoretically, if only a single USB port works, the other ports may be defective and therefore, it would be necessary to replace the motherboard. :(

• All the PC Ports USB does not

  Before going away for the weekend, I turned off my PC and everything seemed fine. But after coming back, all the USB ports fail to read the devices. I ended up having to use chrome remote desktop and some luck to have access without a keyboard, but now I'm at a loss for what to do. I looked and tried several fixes, but none worked. Currently, the two "Standard Enhanced PCI to USB Host Controller" s listed in the so-called Device Manager "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) ». Any ideas would help, but so far, I have tried to uninstall/reinstall them normally and tried to delete upper and lower filters, but none were. And I can't do a restore of the system before it started, as I don't have a fairly recent recovery point.

  AHA! I managed to get into boot options advanced and done what you said (as well as what said a few other people to do using the first command prompt) to turn off the signature device, and now the back ports are working again!

  The front ports but are still stubborn (they don't even give power for what anyone plugged). I'll keep working to fix it, but right now I'm really relieved (I also went ahead and made another restore point in case things went south from there).

• can I load that an omni 10 threw the usb port

  a 10 omni can be charged using the usb port?

  Hello

  The recommendation is to use the charger that comes with the unit. You can still use USB port to charge, BUT it can take ages to get a full charge, and this may affect your computer.

  Kind regards.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• lose the usb port when restarting

  My laptop suddenly lost all the USB ports. I can uninstall the USB hubs and restart and Windows will load the drivers and recognize the USB ports and any connected equipment. Everything will work as usuall until I reboot then have all usb ports stop working. I've updated my Bios and latest drivers available from the manufacturer (Dell), I am running XP home and that you have installed all updates.

  Hi Zmanomore,

  ·         You also update the chipset drivers?

  Method 1: Check if the chipset drivers update is available. If so, the same day and check for the issue.

  Method 2: You can try running the fixit in the following article and see if it helps.

  USB port may stop working after you remove or insert a USB device

• Use the USB port to emulate keyboard

  Hello

  Is it possible to use a USB port of an on-board controller (PXI8108) to replicate a keyboard when plugged on a device waits

  a USB keyboard?

  Thank you

  Gary.

  What I understand about USB, I don't think that you can do.

  The USB ports on the PXI controller host ports are and as such cannot be used as ports of the device. A keyboard would be a HID device class. Maybe it's a kind of emulator HID that could be placed between the PXI and your USE awaits a USB keyboard...

• HP15-g013dx: all my usb ports have failed

  Hello to all the USB ports on my laptop stopped working, I have restored the factory computer, uninstalled the USB hubs and no matter what I plug, it is not recognized.  Any suggestions?

  Portable computer is still under warranty I think.

  * Edit... I just ran diagnostics from the bios and get a failure I.D. # 94L66C-78S7N2-XD7V7F-8D6U03

  I hope this will help... Please advise me on what to do next

  Thanks in advance...

  Support contacted, they will replace the motherboard free under warranty.