Mobile gamepad XBOX 360 not recognized when connected to a Windows 7 64 bit Home Premium computer USB ports

Similar Questions

• Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

  I'm sure that this request has jumped several times. I've recently upgraded hardware and software being windows 10. All devices being Ipads, Ipods and Iphones are not recognized in iTunes once connected to your PC. The PC is to recognize that a device has been plugged in with the usual beeps. I've seen drivers and it seems that usb iTunes etc is not listed. How this can be fixed. Thank you inadvance for advice

  Hello, Aubin Grove,.

  Thank you for using communities Support from Apple!

  I understand that your iOS devices are not recognized by iTunes when you plug it into your computer. There may be two different causes for this type of situation, but we have some great troubleshooting to help you resolve this situation.

  To begin the process of diagnosis, I would suggest reading over and working through the information mentioned in the following article.

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  See you soon!

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• PNP DRIVER DEVICE # USB\VID_0E8D & PID_0003 & REV_0100 NOT FOUND FOR HP WINDOWS 7 64 BIT HOME PREMIUM

  IM HAVING A PROBLEM WITH MY HP COMPAQ PRESARIO CQ60-615DX NOTEBOOK PC. THIS IS TO SAY IN THE CENTER OF THE ACTION THAT MY PNP DEVICE IS NOT COMPATIBLE WITH THE VERSION OF THE OS INSTALLED ON MY PC. IM RUNNING WINDOWS 7 X 64 BIT AND THE ACTION MESSAGE CENTER SAYS THAT THE DRIVER IS A WINDOWS XP NOT A WINDOWS 7X64BIT HOME PREMIUM SO IT CANNOT INSTALL THE USB PNP DEVICE, NOR CAN HE FIND ONE FOR WINDOWS 7, SO WHEN I GO TO THE HP WEB SITE, OF COURSE HE DIDN'T Y HAS NOT THE DEVICE WITH THAT ID #.

  USB\VID_0E8D & PID_0003 & REV_0100... CAN SOMEONE HELP ME PLEASE

  THANKS IN ADVANCE, CINDY

  Hi Cindy,.

  This behavior can occur if the USB (Universal Serial Bus) is defective or if the unit is not getting enough power.

  1. which Plug n Play (PNP) device you recently used on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Click on the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: this also applies to Windows 7

  Good day!

  Answer please if you face concerns.

• USB device not recognized when connected to Toshiba Port Replicator II

  I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

  I get the error message "unrecognized usb device".
  When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

  So my Replicator does not.
  I deleted the software and reloaded with the same result

  I have a laptop Tecra A8 running Windows XP Service Pack 2
  Any help or suggestion would be appreciated

  As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

  If you try to use the option not supported, it is not easy to give any help.

• Batman: Arkham City Xbox 360 not recognized by Windows7 controller

  I recently bought a used Batman Arkham City controller to use for my Windows 7 computer. The drivers of the controller is not found while they were not installed. Not even the program recognized Xbox360 accessories. Help, please!

  You have installed all Windows updates (excluding all "optional" updates)?
  There should be a version that includes the Xinput driver, which is the driver for the controller.
  There was formerly a page to download the Xinput driver, but it is no longer available for
  an unknown reason. Monopoly$ oft works in mysterious ways.

  You can also try site GFWL (separated on the XBOX forums) forums.
  I do not use a XBOX controller, but there should be people out there with more information
  regarding the use of the XBOX controller with PC games.

  On Live

  Games for Windows - LIVE: Support Documents

  .

• error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

  Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

  Hi Daman,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur is because of corrupted USB drivers or incorrect settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Download and update the chipset and drivers USB of your computer from these links and check the issue.

  Driver Chipset
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

  USB driver
  http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP Photosmart c7280 all-in-One vs. Windows 7 32 bit Home Premium - will NOT PRINT!

  I recorded more than 6 hours trying to get this thing to print.  It does not print.  Tried the wireless, USB, Ethernet, NOTHING!  My laptop Lenovo detect it when I plug in the USB cable, downloads, everything he needs, it's good to go, without errors, convenience store can not find something.  When I try to print something, the printer icon appears in the taskbar, but when I scroll over it, it says '0 documents pending' then it disappears eventually.  The only thing that I could print are the test page & page of the HP Toolbox diagnostics software help page.  When I try to print from any other program, it will not be printed.

  I downloaded and installed all the patches, updates and even reinstalled the software that is supposed to be compatible with WIndows 7.  I'm tired, I'm in a bad mood, I'm about to give up AND do what they hope, I'll do and just buy a new printer.

  I browsed all the forums here and done everything someone suggested.

  Have you installed the driver http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us star

• gamepad Xbox 360 as seen in "Device Manager", but not recognized as "game controller": does not work in the game

  I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32).  His does not work in-game.  I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel.  Im trying to use it with the Flight Simulator x.

  Hi Absolutemar,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your problem, please visit the below mentioned link.

  http://www.xbox360forum.com/Forum/

  Please perform the following steps also suggests:

  First we suggest you to download the Xbox 360 controller from the below mentioned link:

  http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx

  Then install the Xbox 360 on your computer:

  Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.

  To install the software, follow these steps:

  1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.

  If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:

  DriveLetter : Setup

  For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.

  2. on the configuration screen, click install.

  3. follow the instructions in the Installation Wizard to complete the installation.

  Note You may be prompted to restart the computer.

  For more information about the Xbox 360 installation on your computer, visit the below mentioned link:

  http://support.Microsoft.com/kb/906347

  In this case, you need more information, you can visit the link below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Gamepad Xbox 360 plugged into USB with "Play and Charge Kit" does not work

  Hello, I have Windows 7 as OS, and I'm having some problems with my Xbox 360 controllers. When I bought the game and load to my xbox 360 controller kit, I heard that it was possible to connect to you pc to play with games for windows live. So, I started looking for drivers, and I found them in the official site of microsoft hardware. I installed it, and then I restarted my PC, I plugged it into the USB port, WIndows recognizes the material. I thought it was very good. But, even if the hadrware has been noted, it doest work. Then I discovered that 'Xbox 360 accessories 1.2' does ' t detects hardware, and it is not recognized as a game, but as a generic Hadrware material.  at this point I have gived up! I surfed the net, trying to find somethig or somemone can help me, but it was useless. Now, I hope that you will be able to solve my problem!

  PS: I already tried to change the controller, to change USB port, to change the cable, to uninstall and repeat the installation of the driver...

  I hope that I was clear and sorry for my bad English!

  Hello TheRick.

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Xbox 360 wired controller works only with Windows 8. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work.

  I have a controller wired xbox 360, not one of these pieces of plug. I put the USB controller and installed the device. However, it does not work. Xbox 360 Assecories status when I click on it says I have it has been changed or moved, and will not work. I have not touched. When I search for a download for Windows 8 all get them are downloads for Windows 7 and below. It's a bit frustrating to not be able to use it. I would be very happy to help.

  Original title: windows 8 wired 360 controller

  I found the problem. I had the appropriate controller and installed the device correctly. This is the program that runs the unit that had either corrupt or missing files. I uninstalled the program and then installed from the Microsoft Download page. Now he works currently. Thanks for the support.

• automatic password is not recognized when I change the password, but in vain

  automatic password is not recognized when I connect in outlook express. He saw the day without obvious reason. I tried to change the password, but to no avail.    A ny comments or solutions?  Jong

  Hi Jong,

  ·         What is the full error message?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  Save the password setting will no longer exist in Outlook or Outlook Express

  http://support.Microsoft.com/kb/290684

  I hope this helps.