Slow boot after power interruption

Similar Questions

• ReadyNAS 104 unable to boot after power failure

  Hello

  My Readynas 104 unit is in a suspended state. Power blue led continues to blink (for hours) when I restarted after a power failure. The disply screen says "READYNAS 6.4.0" and no button works. I can only remove the power cable and connect back to try again to start, but even once, he ends up in the same State of the Power LED flashes continuously.

  Device answering queries ping but actions / iSCSI and admin page not available.

  Someone of you has faced this kind of problem or can help me solve this problem without losing any data please?

  Thank you

  Hussain

  I want to contact support.

• Slow boot after I installed updates to Windows.Currently, Im using Windows Vista Starter

  Latest Windows Installer updates updates on my laptop (Lenovo 3000 G430) last October 22, 2009, he has done after my laptop slower to start completely. Before, it will take just 2 minutes to start completely, but after update this particular taken my departure upward a nightmare. It took me 10 minutes to start completely each time I opened it. What should I do about it?

  Vista SP2 settled on October 22?

  You have installed the updates of November 10 and November 24, still?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  Help! My computer is slow!
  http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Long boot after power outage

  I have several computers (Dell Optiplex 790, XP Pro, domain environment) which seem to be affected by a very long startup having experienced a kind of power event.  Starting log show that it seems to be a long gap (between 5 minutes and 45 minutes) between loading the autochk and csrss.exe.

  During this period of latency - after the XP splash screen and the user login screen - the screen is black with only an occasional HDD activity) as a heartbeat) and no indication that it running a scandisk or anything like that.

  Running chkdsk does not seem to solve the problem, and reimage the computer sets the startup time, so I don't think it is hardware related. I know that autochk has a function of delay, but I think not autochk is actually blocked because the duration is less than 1 second, but the following process (csrss) does not start until 10-20 minutes later

  anyone has any ideas I can try you are looking for? Reimage that a resolution is an indication that emit less drastic corruption of the OS is the underlying cause

  Since you're an IT professional, you will have much more luck in this forum:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
  I wish you a quick resolution!

• ESX boot after power failure problems

  All, morning

  I think that this may be a simple problem to solve, but for the moment I do not know how. We had power cut which lasted longer as backup ups, where the two ESX servers has dropped recently. One came back without problem however it is not. When its turned on it gets to the boot menu, and when the normal startup mode is selected it panic the kernel with a disk error (device missing or similar - can confirm if need be).

  However, if I reboot it and select the debug mode in the start menu it starts very well, starts as usual and will run from VM. This leads me to believe that disks, files, and the BONES are fine and the problem in the config, could be damaged as a result of the unclean shutdown? I did some looking around and read a post on the repair of the boot sequence using the command: esxcfg-boot - r - could not however quantify if this was relevant in my situation or not.

  Any advice greatly appreciated.

  Check UUID in /boot/grub/grub.conf:

  (1) boot VMware ESX Server UUID (root=UUID=c087c715-534d-471e-a023-!@#$%*) is similar with your server VMware ESX (debug mode).

  (2) VMware ESX Server (root=UUID=c087c715-534d-471e-a023-!@#$%*) returns with "/" inside the / etc/fstab

  p/s: while you find how u hav thought about to reinstall your esx that can be done in a few minutes.

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Vista boot after power failure problems

  I was I in the middle of an installation procedure when the eletricity came out... After that VISTA does not start correctly. I don't have the recovery CD, suggestions regarding what I have to do

  What model of laptop do you have?

  What error do you see?

  Have you tried to repair windows by using the recovery console? (Press F8 before Windows starts)

• "Windows 7 Build 7601 this copy of Windows is not genuine" and the slow boot after malware removal

  HP Pavilion dm4 my daughter recently started to take about 10-15 minutes to start, tell me that he had become infected by something questionable. It is currently running Windows 7 Home Premium SP1, with AVG free anti-virus.

  When we noticed the problem first, AVG has been disabled (probably by malware), and I could not turn it back on. He would not run a scan at all. I have scanned it with Norton Power Eraser and their free bootable scanner, nor identified any problems. I ran Malwarebytes in safe mode, and it found several files associated with Yontoo, which he deleted. I ran ccleaner, including the registry cleaner. At this time, AVG was returned to service, so I ran a full scan with it. AVG found several files associated with OpenCandy, which he deleted. A scan later Malwarebytes came clean.

  For now, the system seems to work fine, EXCEPT: there are still a huge amount of time to start - several minutes between each step. And now, the desktop appear intermittently a message which reads: "Windows 7 Build 7601 this copy of Windows is not genuine".

  I found a lot of discussion online about this error message, but it seems that each of them (which I reviewed) has a different twist to what I feel.

  Any suggestions for next steps? Thanks in advance.

  Marty

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 73CQT - WMF7J-3Q6C9
  Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
  Windows product ID: 00359-OEM-8992687-00010
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {321485FF-2C7F-4DDA-9124-0D4D28670BB4} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {321485FF-2C7F-4DDA-9124-0D4D28670BB4}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-3Q6C900359-OEM-8992687-000102S-1-5-21-325666077-4022567897-4061562596Hewlett-PackardHP Pavilion dm4 Notebook PCHewlett-PackardF.0320100402000000.000000 + 000308A3407018400FC04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-MPC10010012dV plus q6DdvhcKikFOSx4zqfTXcqyQ 42F7D29929DA716Microsoft Office home and Student 2007 81602-907-9420346-681571

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800010-02-1033-7600.0000-1242010
  Installation ID: 013924405414857934386442430671098625394201997583852710
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 3Q6C9
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 16/09/2014-18:10:14

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: KgAAAAEAAQABAAEAAAABAAAAAQABAAEA6GEEOpAwSrwc9bTnDrV8XFxd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-MPC
  FACP HP SLIC-MPC
  HPQOEM HPET SLIC-MPC
  START HPQOEM SLIC-MPC
  MCFG HPQOEM SLIC-MPC
  ASF!   HPQOEM SLIC-MPC
  SLIC SLIC-MPC HPQOEM
  SSDT TrmRef PtidDevc
  SSDT TrmRef PtidDevc
  SSDT TrmRef PtidDevc
  SSDT TrmRef PtidDevc
  ASPT HPQOEM SLIC-MPC
  SSDT TrmRef PtidDevc

  Marty

  To recover the files please see paragraph 7.4 in the link here:
  http://www.gerryscomputertips.co.UK/win7tips1.htm

  Alternatively, you can run chkdsk from the other computer hard disk.

  When you have recovered your data files you can restore settings.

  Another option could be to download a copy of windows, to burn a copy on DVD and try a repair installation. The sticker COSTS on the computer applies to OEM Windows Home Premium? -What is the 25-character readable product key?

• Re: Tecra S10 G11, extremely slow boot after BIOS update to 3.00

  My laptop was working fine until I updated the BIOS to 3.00. It takes a lot of time to start all the trunk was support (disk, CDROM,...). Once I have selected the bootable media, the screen goes black with a white blinking cursor for about 5 to 10 minutes, then loads windows normally and everything works perfectly.
  I think the decommissioning of the bios, but I can't find older versions.
  Kind regards

  Hello

  Only a newer version of BIOS is available on the European driver Toshiba page
  So, if you need an earlier version; contact a local ASP.

  However, I recommend to access the BIOS and to set the default settings.
  Perhaps it is necessary to get the Mobile QuickStart

  Good luck

• M90e: very slow boot after XP downgrade

  A few weeks ago, I spent a M90e/3244 system with Win7-64-XP - 32 success. Now, I needed to do the same thing to another system M90e/3244. Result: white cursor flashes for 3-5 minutes on black screen until XP's start. In both cases, the BIOS settings are defined factory (except SATA, which is set to IDE instead of AHCI). BIOS version: 1st machine: machine 2nd 5JKT51AUS: 5JKT53AUS (both) Chipset driver: 9.1.1.1013 (9.1.1.1020 upgrade didn't work!) Do I have to downgrade the BIOS of the second machine to 5JKT51AUS! What about Peter

  I solved the problem by downgrading the BIOS to version 5JKT51A (using the procedure described in the readme.txt attached the package).

  Concerning

  Peter

• x 301 slow boot after bios load to the first 10 min windows boot screen

  I replaced the new installation of XP hard disk and removed the CMOS battery to clean.

  I'm stil get the same results

  "Start screen for Windows with the displacement of the points remains on display 10 minutes" at startup.

  What could cause this?

  any idea on what to look for

  Past all the Lenovo system

  updated the bios to 3.07 - 1.05, which seems to have solved the problem.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Automatic start after power outage - Inspiron 20 all-in-one

  I cannot find a setting of auto-start after power failure in BIOS, Inspiron 20. I really hope that I missed or can we make it happen another way. Someone at - it something?

  Thank you!

  Control Panel, system, advanced system, the boot parameters. But this isn't for the system failure power failure. Sorry - I read your post too fast.

  I don't think that today's computers can auto start after power cuts and even if it is possible, it is not recommended. Buy a battery backup UPS as APC must prevent interruptions of power failure and give yourself the time to shutdown properly.

• Satellite M30X-111 died after about 15 sec after power to the top

  Hello
  My M30X 111 died after about 15 sec after power upward. The blue light comes on, the fan starts and then turns off & the dies machine - however, the blue switch remains on. Then I have to keep the power button up to swith off the machine.

  I can't go as far as the BIOS and it does not start from CD, etc.

  Thanks in anticipation,

  Hello

  The laptop goes to home Toshiba screen?
  If yes there is no hardware malfunction but perhaps something wrong with the software.

  You suggested that it of not possible to enter the BIOS. How have you tried to get into the BIOS?
  As far as I know, this unit uses a Phoenix BIOS so you must press the F2 key immediately after switching on. Press the "F2" key several times to make sure that the option has been enabled.

  The alternative to boot from the CD/DVD drive is using the C key. The same procedure here: press the C key immediately after starting the laptop.
  (the CD must be inserted before you start)

• root > \system32/had.dll message after power failure.

  After power failure, I got the above message.  I tried to rebuild the CD system following the instructions Microsoft but still can't het PC to start.  Any ideas anyone?

  Thank you

  Since you didn't say what were these instructions, we do not know what you were doing!

  You need to start the recovery console, run chkdsk r, then /Rebuild. bootcfg The first part can be read here:

  http://www.icompute.info/System_restore_from_xp_cd.htm

  You will need to understand how your PC (you neglected to tell us the make, model and model number!) can boot from the CD-ROM. Then, run the Recovery Console. DO NOT ENTER THE INSTALLER! (If you do, you run the risk to wipe your entire disk clean!) Follow the indications of the above page and then stops after having successfully performed chkdsk/r. In other words, don't do the fixmbr part!

  Then, for the second part, read here:

  http://www.icompute.info/halldll_error.htm

  Restart the PC in the usual way (that is, start with the hard drive) and let us know if you are at the back of buisiness.

• WAG300N: could not start correctly after power failure

  Hello

  After AC power interruption, I tried to turn on my router Linksys WAG300N, but he won't start properly. I will describe what it looks like and what I've tried:

  I push the power button / stop, all 4 Ethernet LED simultaneous light for about a second, (if there is LAN cable connected, one or more led lights permanently) and power the LED will blink twice at normal speed. After that, both voltage and wireless, led simultaneously for about 1-2 seconds, start power LED flashes quickly, after seconds wireless LED stop light, wireless flash LED again and stop two LEDs for lighting. Second later power LED flashes two times normal speed and the process begins again but without flashing of the LED Ethernet (loop).

  I tried to download the firmware using TFTP, but it does not work. Router did not respond to a ping. After many tests, I noticed that the only time where I can ping router is during normal those two blinks of the power led. I've got 11 times waiting and the response of 1 or 2<1ms, 11="" timeouts,="" 1="" -="" 2="" responses etc... (response="" waiting="" time="" for="" a="" ping="">

  I've tried a few ways to reset the router (based on this forum). It does not help, sometimes after the reset I power the router problems or flashing process stops after a few loops (only one Ethernet LED lightning or router turns off). At the end of a day all supports them to the previous behavior of closure with power LED and wireless LED blinking.

  In the end, I tried utility upgrade Sercomm 2.07 mentioned in this topic: http://forums.linksys.com/linksys/board/message?board.id=DSL&thread.id=52

  This software detects only router after reset, when the router is in unknown mode, Internet and power LED flashes alternately.

  Software detects the device as MAC address and visualize correctly the version of firmware loaded into memory. Looks like it works and flashing memory. While flashing memory, power LED, LED Internet and Ethernet LED flashing at the same time very fast. I tried all versions of firmware available, but it does not help, I still have the same behave after flash.

  I think it could be a problem with the bootloader, maybe that part of the memory is broken, but I did not how to fix it. I found information on the JTAG interface, but I don't know if it will work for router WAG300N and where I can find the appropriate file with bootloader.

  Maybe someone can help and give me the idea what should I / check. Theoretically, I should have left 1 year warranty, but I lost the proof of purchase required for the RMA process. I can't find the place in Poland where professionals can help me, so I think that should do it myself with your help

  I think that's the problem with the power adapter... You should try a different power of the specification of the same card...