SLOW computer: "xoutzoi has stopped working".

My Dell inspiron 1525 with Windows Vista has started running VERY slowly overnight. The mouse is too nervous. I get the message: "xoutzoi has stopped working". Sought to find xoutzoi & see that it is in the Elf AppData/Roaming in a folder called 'ozzuvao '. I'm NOT a computer expert (as you can probably just of my question). I wonder if I can remove the xoutzoi from the computer or if it's necessary. Advice on how to solve the problem would be much appreciated.

Hello

Scan of Malware in Safe Mode with network.

http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

Windows Vista

Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the button F8 repeatedly until you are presented with the Windows Vista Advanced Boot Options.
  3. Select it Safe Mode with the option of networking using the arrow keys.
  4. Then press on the key on your keyboard to start Vista Safe Mode.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And also scan with the free version of SUPERAntiSpyware

    http://www.SUPERAntiSpyware.com/download.html

    SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

    SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    THS is a very good program to scan your system to remove adware, etc.:

    http://www.bleepingcomputer.com/download/adwcleaner/

    AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And just to be sure, nothing is lurking in the background:

    'TDSSKiller Rootkit Removal Utility download for free'

    http://USA.Kaspersky.com/downloads/TDSSKiller

    ABon the Defender being turned OFF

    With MSE installed Windows Defender is supposed to be disabled.

    MSE has been designed with its own version of Windows Defender under its own program.

    If the two were running, it would cause system conflicts.

    ___________________________________________

You can clean your hard drive using these two methods.

"Delete files using Disk Cleanup"

http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

Using the free CCleaner program:

http://www.Piriform.com/CCleaner

In NO case use the registry cleaning Option in CCleaner

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Update drivers:

Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

"Optimize Windows for better performance.

http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

It would be a good idea to run the System File Checker tool if you have corrupted files

"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

http://support.Microsoft.com/kb/929833

Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
    /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

    If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

    "How to perform a repair for Vista Installation"

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

See you soon.

Tags: Windows

Similar Questions

  • OfficeJet 6700 Premium: Officejet 6700 the computer scanner has stopped working

    My scan of the computer stopped working with my PC HP 10 Windows, I ran doctor scan it says driver error and can not solve the problem, but I seem to have the latest version of the driver and the fax does not either, so only print work. All is connected by ethernet network, but I have tried with a USB Wi - Fi and always the same, any ideas as this has worked successfully for months on windows 10.

    Hello @Paul95,

    It is a great place to get help! I read your post and see that you can not scan from the printer to the computer. The PSDR shows a driver error. I want to help you solve this problem.

    If you cannot scan from the computer software, then you will not be able to scan from the printer to the computer. Most likely the scan drivers are not installed properly or are corrupt.

    You can scan from the HP scanning software?

    Try the procedure described in this document to see if it will help: after Windows 10 Upgrade, printer will not scan. Do not take into account the title. You can skip the steps that you have already tried.

    I would like to know if the scanning application works.

    You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

  • Motocast wireless computer Sync has stopped working

    Hello

    From 15/01/2013, Motocast Wireless sync stopped sync my Razr Maxx to my computer files. It was working fine until recently. I tried to reinstall the application Motocast on my computer (PC with Windows 7) and that has not fixed the problem. Anything else I can try to get wireless sync files (and Yes, in Motocast on the phone to sync enabled).

    Verizon pushed the Razr Maxx also just updated yesterday. Still no luck on getting photos to sync with my computer.

    Unfortunately, it is not an option to select the files and force them to synchronize manually. I would if I could to at least save my photos. I'll try the USB later for at least to synchronize data.

  • my wireless to my desktop computer keyboard has stopped working

    my keyboard wireless for my OSX EL CAPITAN

    2.7 INTEL CORE i5 does not work

    Try these tips...

    If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  • Windows 7 my the media game is slow and still the error who say it has stopped working

    Original title: help me please

    my set of media is slow and still has the error who say that it has stopped working

    Hello

    1. What is the accurate and complete error message you get?
    2. don't you make changes to the computer before the show?

    Method 1
    I suggest you to perform the following troubleshooters.

    Open the troubleshooting Windows Media Player settings Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Open the troubleshooter in the Windows Media Player library
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

    Method 2
    If the problem persists, disable and enable Windows Media Player

    Step 1:
    disable Windows Media Player
    a. Click Start, type optional features and press ENTER.
    b. in the list of objects, expand multimedia functions.
    c. uncheck Windows Media Player and click ok.
    d. restart the computer so that the changes take effect.


    Step 2:
    allow Windows Media Player
    a. Click Start, type optional features and press ENTER.
    b. in the list of objects, expand multimedia functions.
    c. place a check on Windows Media Player, and then click ok.
    d. restart the computer so that the changes take effect.
    e. check if the problem persists.

    See Or turn off Windows features turn on

  • computer keyboard HP laptop has stopped working

    my computer keyboard laptop hp pavilion has stopped working; can be used only on screen keybord - ideas?

    Use the warranty and contact HP. How to do?
    Click on the link below and choose your country:
    Contact HP worldwide

  • RTFTrack has stopped working message followed computer crash

    I have a Lenovo Edge 15 (got 11/03/15). Recently, when using SKYPE, making a video call, a box has developed indicating that RTFTrack has stopped working. The screen becomes white, then the computer crashes. So my call is disconnected, my computer restart and I have to log in again, open SKYPE, etc. What happened 5 times in the last three weeks. What can I do to fix this?

    Apparently RTFTrack is from Realtek Semiconductor and RTFTrack appears in my Start Menu and begin to start my computer.

    I appreciate your help with this. Thank you.

    I updated my driver of the camera from the 20/03/15 update driver on Lenovo's Support page for my 15 Edge and the problem has not yet appeared. I'm keeping my fingers crossed.

  • I can't open some programs and also what indicating computer it is said GfxUI has stopped working. do what Mathilde?

    I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?

    Hi, Rosemary,

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.

    If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07.  If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.

    I hope this helps.  If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.

    Good luck!

  • When the computer is started, get error message sistray has stopped working

    Original title: sistray has stopped working

    When I start my Pc, I get a sign that says "SisTray stopped working" and something like windows are looking for solutions, but whenever I turn it on, just the same sign. What should I do?

    Thank you.

    Hello

    1. what operating system do you use?

    2. don't you make changes to the computer?

    Method 1: Check in safe mode and the clean boot

    For the open procedure the computer in safe mode, open the site mentioned below:

    Start your computer in safe mode.

    http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

    If the problem does not persist in safe mode, try to start your computer in a clean boot.

    For the procedure to place the computer in a clean boot, open the site mentioned below:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

    http://support.microsoft.com/kb/929135.

    Note: to set the computer back to start normally, use the step 7 in the same link.

    Method 2: Update the video driver

    Update driver by following the steps in the site mentioned below:

    Update a hardware driver that is not working properly.

    http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  • My computer keep saying windows has stopped working

    My computer keep saying windows has stopped working. What can I do to solve the problem?

    Hello

    1. for how long are you facing this problem?

    2. did you of recent changes made to your computer?

    3. what operating system you run on your computer?

    I suggest that you perform a clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Explorer Windows stopped working

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  • whenever I try to go into my control panel or computer I get a message that windows Explorer has stopped working and she said then it restarts, but I can access my computer

    Help!

    Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

    Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

    Why you are posting in the forum, IE?  Maybe the reason why you try to use the CP is to enter Internet Options?  If so, you can do it without the help of Windows Explorer (at least on your operating system) starting (using the Task Manager if necessary): control.exe inetcpl.cpl

    Otherwise what your problem probably means is that you have added something new to the root of the control panel which is not compatible with your OS, causing thus the Windows Explorer (not IE) crashing.  In this case, the same way you could get in Add Remove programs without involving Windows Explorer by starting: control.exe appwiz.cpl

    You can get help more informed by post on a forum that specializes in performance and Maintenance of your operating system.

    Good luck

    Robert Aldwinckle
    ---

  • "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

    "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

    First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

    Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

    Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

    Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

    No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

  • PC-Doctor module has stopped working, but do not know if I have it on my computer...

    In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

    In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

    Hey Toccet

    to be on the good side for malware scan

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem if it is malware before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If this does not work in normal mode only the above work in SafeMode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Walter, the time zone traveller

  • GfxUI.exe has stopped working after rebooting the computer.

    Original title: error GfxUI.exe

    I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

    Hi Kea2300,

    Did you the latest changes on the system?

    This error message indicates to the Intel graphics driver.

    Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Hope this information is useful.

  • "MessagingApp.exe has stopped working" error when I turn on the computer.

    In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

    original title: error MessagingApp.exe

    Hello McEvor,

    1. don't you make changes to the system before the show?

    2. Since when have you been faced with this problem?

    Try the following steps to try to get the fixed number.

    Step 1:

    Try to put the computer in a clean boot state to see if the same message appears

    A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

    http://support.Microsoft.com/kb/929135

    Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

    Step 2:
    An analysis of security and verification for infections.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    1. you can run a virus scan online from the link given below and check if the problem persists.

    Microsoft safety scanner

    2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

    If the problem persists, please contact support messenger yahoo from the link below for more support.

    http://help.Yahoo.com/l/us/Yahoo/helpcentral/

    Hope the helps of information provided.

Maybe you are looking for

  • How to disable "on: newtab ' text in the address bar of each new tab Firefox 13

    Many of us are used to open a new tab and begin to write search queries / web address in the address bar with Firefox 13 if I open new tab and just try to get firefoxfollowing appears in the address bar Subject: newtabfirefox (topic: newtab is alread

  • e039tx: replacement graphics card

    Jin I use hp e039tx with an ATI Radeon HD 8670 M 2 GB DDR3 grpahics card. Given that most of the games from today does not work, I would change my graphics card to Nvidia GTX 870 M 3 GB DDR5 . Is this possible?

  • SP A60: Can't get wireless to work

    I got my A60 SP for a year and have only just tried to use the use wireless. I'm unable to connect to a wireless network and yet all indications are that the wireless port works correctly. My card is a SMC IrCC fast infrared port SP1, I checked that

  • Circuit of Simulink connection to the controller of LABview

    I try to use my LABview VI to control the switches in a Simulink model. I do not know how to accomplish this task, but right now I'm trying to establish a connection between the two.I have 2015 LABview and MATLAB 2011.After googling how to connect a

  • the printer uses a different computer. no other computer help...

    I use an HP laptop.  Just upgraded to windows 8.1.  Now, I get this message "another computer using the printer" I have a PIXMA MG5420.  I'm connected wireless.  Help, please.