Slow down or frozen system when you run Time Machine

Similar Questions

• Contacts crashes when you enter Time Machine

  There is no work around for the following problem?  Or should I just wait for a fix from Apple?

  I used Time Machine before retrieving the information from Contacts accidentally deleted or changed on our iMac.  Now when I try to do the same Contacts crashes.

  The screen starts to display the pages of Contacts who goes back in time, then return to the office. I am running the latest version of Mac OS X, El Capitan.  Reports were automatically sent to Apple - looks like a bug.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  I am running Windows 7 Professional.  I have a piece of equipment that has only Windows XP drivers, I desperately need to work.  I read up on top of the virtual systems and XP mode.

  When you run XP mode USB ports will not accept XP drivers or if they remain Windows 7? Should I really go to a Dual Boot System?

  Thank you

  Andrew

  You must attach the USB device to Virtual PC XP Mode: http://support.microsoft.com/kb/824369

• Satellite A500 - game starts only when you run fraps

  Hello

  I have a Toshiba Satelite A500 with an i5, nvidia GT330M with 4 GB of RAM card, I only use drivers for toshiba and in dead rising 2 there are some significant slowdowns tried

  Patches as rename the dead rising2.exe etc., it did not work, I play my resolution 1366 x 768 and with shadows and zombies at the top with 16 AF, leaving the vertical sync, sampling and blur to the broad, the game is full of similar slowdowns trolling (character begins to run slowly).
  More funny thing is that when I recorded with fraps (lock the framerate on) I can play smoothly with no slowdowns at all, I even tested and set of 4 complete (AA) and turned on the vertical sync and the game was playable with no slowdowns on very large crowds of zombies, when I play normally without stil fraps recording, when the game slows down Press f9 for fraps to start recording and the game starts immediately

  Race "smooth", fraps makes very large files and in a short time it would fill my drive, the program limits setting I tried but delays were still present:-no opinion on this subject or

  possible correction for the game?

  Hi fiurion,

  Very strange what s... To be honest I never heard tell that it is only possible to start the game when you run fraps...

  You have installed an antivirus or firewall program that could block the start of the game?

  Also I recommend that you install the latest version of DirectX and display driver.

• When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  hch17

  I suggest that also ask you your question to the MSDN Visual Basic Forum

  Visual Basic general forum

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  Don't forget to register

  1 Basic version of the program has been compiled with

  2. the current PC operating system

  3 environment if used programmatically

• My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.

  Original title: unexpected reboot

  My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
                                                                              
  Maybe the problem is related to this message in log file:
  SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
  Source: Service Control Manager

  I would be very grateful if you can help me.

  Hello

  Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.

  Steps to select Disable automatic restart on system failure option:

  1. reboot the computer
  2 start typing the F8 key
  3. you get it anticipated the startup option window
  4. Select DisaDisable automatic restart in the event of system failure

  Step 2: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• I get "catastrophic failure: (0x8000FFFF)" when you run backup

  I get the error message when you try to run the backup. I tried to run a check disk at startup, but I get another message indicating that I can't because "cannot access volume. What can I do?

  Hi Paul436,

  Try running the disk drive check WinRE using the full version of Windows Vista disk and check if it helps.

  a. Insert the installation disc.

  b. restart your computer.

  c. When you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at the command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  DISM / Online/Cleanup-Image /RestoreHealth

  Management and maintenance of deployment images tool
  Version: 6.2.9200.16384

  Image Version: 6.2.9200.16384

  [==========================100.0%==========================]

  Error: 0x800f0906

  The source files could not be downloaded.
  Use the 'source' option to specify the location of the files that are required t
  o restore function. For more information on the specification of a source location, see
   http://go.microsoft.com/fwlink/?LinkId=243077.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  Ran according to this link repair instructions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/dismexe-online-cleanup-image-restore-health-failed/668ef107-5f4c-4959-Ba93-76d052452315

  Network list Service will not start.

  ---------------------------------------------

  Verifying the service dependencies. The following error message

  Win32: A dynamic link library (DLL) initialization routine failed.

  -----------------------------------------------

  Windows Update is able to operate, and I am able to download all of the updates.

  -----------------------------------------------

  Here is my DISM.log file for troubleshooting.

  http://pastebin.com/Z2Fc8JL4

  Excerpt from CBS. Only JOURNAL entries [SR]

  http://pastebin.com/1jn2SWPV

  Complete CBS.log for 2013-06-22

  http://www.sendspace.com/file/hdq0yu

  You get the error 0x800f0906 because you have installed KB3022345. Uninstall it by going to programs and features in Control Panel and then click on the link "View installed updates".

  In the Find box top right, copy and paste (or type) KB3022345 and when it appears in the list, on the right, click on it and choose uninstall.

  See these two articles for more information on the subject: Microsoft confirms patch KB3022345 SFC/scannow breaks

  Windows patch KB 3022345 triggers apparent file system corruption

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• Using vmrun to obtain an IP address when you run the virtual machine mode headless fails customers

  Operating system: OS X Yosemite 10.10.5

  VMware Fusion: Professional Version 8.1.1 (3771013)

  When you run a VM guest in headless mode I can't use vmrun to get IP clients. If I eventually bring to the top/start the merger GUI, the command returns the IP address as planned. It is always reproducible.

  $ vmrun -T fusion start "path/to/MyVMs.vmx" nogui
  2016-06-12T10:55:46.626| ServiceImpl_Opener: PID 11515
  
  ... wait for VM to come up. If the VM has a static IP address I can now ssh into the instance.
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  Error: The VMware Tools are not running in the virtual machine: "path/to/MyVMs.vmx"
  
  $ vmrun -T fusion checkToolsState "path/to/MyVMs.vmx"
  installed
  
  ... Start the VMware GUI and ensure the VM's console window is open
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  192.168.100.23
  

  I tested with open-vm-tools and tools VMware packaged with the merger and the behavior is the same. I also spoke with others on the channel of freenode #vmware who have confirmed that the problem exists for users of workstation as well.

  Hi danandham,

  Welcome in the vmware community. Iyou s really a problem, we try to fix it.

  After a command, you can use as a workaround:

  vmrun t fusion getGuestIPAddress "path/to/MyVMs.vmx" - wait

  See you soon

• Network error [10053]: can not send data when you run a calc in Planning

  Hi gurus,

  I get a network error [10053]: can not send data when you run a calc in a planning application.

  Looking in the newspaper of the App in Essbase server, I found the following:

  [Thu Apr 9 15:37:36 2014] Local/MYAPP / / / 140285871445760/Info (1008108)

  Internal logic error Essbase [1]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008106)

  Exception error log [/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostic/newspapers/essbase/essbase/app/MYAPPlog00004.xcp] is being created...

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008153)

  A core file can be generated in [/Essbase/oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/MYAPP/ESSSVR.] Wed_Apr__9_15_37_02_2014]

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1008107)

  Exception error log completedmyapp/Essbase/oracle/Middleware/user_projects/epmsystem1/diagnostics/log/essbase/essbase/app/MYAPPlog00004.xcp please contact technical support and provide them with this file

  [Thu Apr 9 15:37:36 2014] Local /MYAPP///140285871445760/Info(1002089)

  RECEIVED COMMAND OF THE UNUSUAL STOP - REQUEST FOR TERMINATION

  My environment is Windows 2008 R2 with Oracle Database and having only Essbase server in a SUSE LINUX box.

  Could someone help me on this?

  Thanks in advance

  We've tracked down the instructions in the calc and the error occurs in two blocks of calc. After the split in two blocks of the calc has no error more.

  Thanks to you all

• get the error when you run bootcamp on Sierra

  When you run Bootcamp-can not go beyond the second screen that gives me an error of pop-up windows 'startup drive must be an OS X extended (journaled) formatted partition.

  Workaround attemps I have partitioned my drive native and also used an external hard drive, both in format OS X extended (partitioned).

  I tried to use bootcamp years ago and ran across similar see the questions to stop. I thought I'd try a second time to run Winzozz 10. So frustrating!

  OS X Terminal, please after the release of

  diskutil list

  Apple does not officially support Windows on external drives. Microsoft is only supported under Windows Enterprise.