Slow internet latency time

Similar Questions

• Incredibly slow Internet response time.

  Original title: taskbar

  I had a problem with incredibly response times Internet. After reboot, I discovered in the taskbar, the icon of the single computer that deals with network connections, i.e. wifi had an x in it, which means it is turned off. (This isn't the icon to connect to the LAN of double work). Because my PC is using wifi and is not also connected to the cable, I was wondering what task is connected to wifi.

  I also noticed that my Internet speed of response actually works at an acceptable speed now that the icon shows it is off. Which task is this icon, so that I can disable it using msconfig and task is WiFi so that one is not?

  I use a Dell desktop computer, through Time Warner Cable. I had the SP3 for some time and that you have not added any new programs or updates, that I remember for a while.

  The only change in my computer added wifi (after moving to a new House/State) about six months ago.

  As a further complication, when I logged on today, connecting to the wifi network shown in the taskbar opened and ran into a mode of connection 'very good '. So yesterday and the previous week, I had access to the Internet with it NOT connected. My taskbar displays a computer screen green with waves in the upper left corner and says "Netgear WNA3100 is connected to...". "my camera wifi router in the basement next to the TW modem.

  Correct me if I'm wrong, but I think that there are two connections wifi different trying to run... one that was working yesterday and one today showing tasks in my bar.

  I blame that for my calculation of the slow speeds.

  Looks like you have three icons of network connection...

  1. area (cable) connection icon - two screens - probably with a red X

  2. the icon of Windows wireless - a blue screen with 'waves '.

  3 - Netgear wireless connection icon describe you it as 'green with waves screen '.

  It also seems that maybe you think that 2 and 3 are separate connections. This is not the case, they will just separate indicators of the same wireless connection.

  Reading between the lines a bit, my guess is that you used to have only 1 and 2, but now you have the 3rd too. If I'm right, probably, what happened is that you have started the application of Netgear wireless configuration, which experience tells me tends to 'support' of Windows wireless configuration without even asking if you want that to happen. All you need to do to get rid of this icon of the green screen is open the Netgear configuration (via its system tray icon) and find a check box saying "let Windows to manage my wireless network connection" (or words to that effect, in addition, it is that the word 'zero' in the text). If you have no network connection after doing this, then you were always in a Netgear configuration and you will have two choices...

  1. Start the Netgear form the menu start and reverse the changes that you just made
  2. Configure Windows to control the wireless connection

  If you want to Setup Netgear instead of Windows use, I think that you will have to put up with the two icons.

  Tricky

• After updating to the latest computer firefox on the internet running slower, taking more time to go to the links and sites.also if I click on an e-mail link the link keeps refreshing like mailto and custom stop opening new tabs very quickly, having to st

  Since the installation of updated, when you use internet, e-mail all slowed and takes time to go to Web sites to download pictures on email.
  also when I click on an e-mail link to send the emails tab bar refreshing guard and open a new tab very quickly what I can read cos its so fast is mailto this happened several times on various websites, I clicked on an email that we link on grangerhertzog.com yesterday and he did.

  You get this problem if you select the Firefox program to manage a file if you get an 'Open with' dialog box.

  • https://support.Mozilla.org/KB/Firefox+keeps+opening+many+tabs+or+Windows

• Connection of slow internet speed of Time capsule

  I have a time Capsule airport of 5th generation 2 TB (802.11 AC) and a modem TP - LINK TD - 8816 ADSL2 (bridged) connected to the TC. In recent weeks, a very slow internet connection has been detected (get the go-ahead in TC and airport utility)

  Of course, I started by judging my ISP but then realizes that configuration back to the modem for PPPoE over Ethernet, the connection achieved expected quotient of internet speed.

  I have reset the TC back to the default settings (to erase all of the current settings) and set it up again with the new and cool settings. Same results.

  For the record: I have experienced same speed slow results at the TC test by wireless or ethernet connections.

  Airport Time Capsule is running 7.7.3

  MacBook Pro (retina, 13 inches, end 2013) OS X El Capitan 10.11.3

  I came back to use the modem router Zyxel provided by my ISP with internet high speed optimal but misses my TC!

  Thanks in advance for your support.

  I'm in the same boat... There is something seriously wrong with the TC in PPPOE mode. And nothing you can do that on it. Apple has all the controls available in the outside world.

  I got around it by using a modem router or other router between modem bridged and TC.

  In the end I put the TC in static IP mode, and it worked very well with another router.

  See Re: time capsule Airport Guard disconnect

• Due to a slow internet connection, I tried to download my purchased software several times with no success. Then, I continued receives the following message: "TOO_MANY_DL_ATTEMPTS if you have any questions, please contact Digital River Customer Service."

  Due to a slow internet connection, I tried to download my purchase

  software several times without success. Then, I continued to receive the

  following message appears:

  
  

  'TOO_MANY_DL_ATTEMPTS '.

  
  

  If you have any questions, please contact Digital River Customer Service

  to [email protected]. »

  I contacted them and they said I need to contact Adobe.

  no idea how to fix?

  Thank you very much.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• Very slow internet download

  I use Windows 7.  When I use the internet, the download speed is incredibly slow.  Several times I am downloading of information for the job and it takes so long that I just give up and close the window!  I tried so many suggestions on how to improve the speed, but nothing really works.  I'm not a computer genius, so that many of the suggestions will just above my head.  Someone would be able to help me with a step by step solution?  I would be grateful!

  Anna

  Post a picture of this

  http://www.Speedtest.NET/

  These pieces of information considered

  https://blogs.technet.Microsoft.com/Networking/2016/08/11/an-update-on-Windows-TCP-autotuninglevel/

  Short version is

  Open administrator command prompt

  Use them to simulate the victory - 8.1 and 10 press the Enter key after each separate string is entered.

  netsh interface tcp set off heuristic

  netsh int tcp set global chimney = disabled

  netsh int tcp set global netdma = off

  netsh interface tcp show global

  To confirm that the changes have been applied.

  I also use this too ;)

  netsh int tcp set global congestionprovider = ctcp

  

• Apps for download on store window due to a slow internet connection of microsoft servrs

  I just bought a new laptop HP Pavilion Touch Smart 11-e11Onr with little window 8.1 64.   I was in the store window Thursday and download a game, but on Friday, when I try to load another application, it will not download.  I get an error message "cannot complete your purchase due to the slow internet connect, please try again on another connection.   Problem is that my Comcast Modem works fine and my Internet speed is fast.   I went back to Office Max on this problem and they did a speed test on my end, which proved very much, but when they did speed test on the side of Microsoft, that's where the problem is... their connection to the server is too slow.   The shop window is not available since Friday.  When they get this fix so that I can down load more of the store.   My app store Google on my phone works much better than this!

  Can someone please check on both Microsoft and find out what's going on?

  Don't be so quick to deny that the problem I got exactly the same problem as with Time Warner, and I had their techs here at least 15 times. Nothing was found or not corrected until they sent a monitoring on the ground and when he saw that I was running, he told me that they bear not Internet Explorer 9 still and their link didn't work correctly with Windows 8. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

  correctly

• Can I change the default settings for the latency time Serial Windows with LabVIEW

  I have a wireless data collection device that my business is that I am using for the test one of our other wireless products. The device sends data series to a PC via a USB port. I wrote an automated LabVIEW program to test all the functions of my new product. However, after firing in the data, I realized that the serial data coming very fast and requires me to change latency of Windows by default for the port COM 16ms 2ms Miss not nothing. It's pretty easy for me to do locally on my machine, but much more difficult for me to spec for an off-site CM.

  Is it possible to have my LabVIEW program change the latency time of the COM Windows port of 16 ms to 2 ms automatically?

  Are you talking about the FTDI driver? I know that they allow these changes through registry settings. Thus the approach would probably be to have a small registry script that updates the parameter of function. Most likely, this will have to be run with elevated privileges, as these parameters resident generally in the HKLM or HKCR rather than the HKCU one hive.

• is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day.

  is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day. I have just hooked to the nbn (national broadband - Australia Network) and have just bought a wireless modem/router 9323 method. I set it up and it worked. I noticed that I have two internet connections when I go to access the internet. one is a broadband connection and the other is nettcomm wireless 9323. What gives with that?

  You have a connection wireless and broadband that you could use one or the other or both. It is recommended to use one at a time. Contact your internet provider and discuss the issue with them.

• I2C communication slows down over time using USB-8451

  Hi all!

  I try to communicate via a device slave using a USB-8451 I2C and I noticed that after a while the communication speed slows way.

  I can send and receive data very well and apparently my system seems to work. But the problem is that over time the speed of data transfer slows down so much so that if I let it run all night it has slowed to a crawl in the morning. My ultimate goal is to gather data, draw and save every second and at the beginning it is easily achievable, but after 10-15 hours I can no longer collect data as fast I need. I'm not quite sure if this is a problem with my code LabVIEW, the NI USB-8451 box or the slave device. But if I stop running the LabVIEW program and start it again, everything returns to normal.

  The slave device is a personalized card with a microchip PIC which acts as a slave I2C and returns the data at the request of the master. I can't imagine anyone will be able to determine if this is a problem directly, but if we can rule out the other two (code LabVIEW or the NOR-8451) as the source of the problem so I know it's my slave device.

  I've greatly simplified the LabVIEW code that I used to collect data on I2C and I see even this gradual slowing down over time. Attached, it's that the very simplified VI and the data file, it produced. I only ran it for about 45 minutes, but from the beginning to the end we see again that the enforcement timeframe is rising.

  I hope I'm just doing something stupid, thanks in advance!

  -Aaron

  Aaron,

  Do not have the additional module responsible for these functions, but I'm sure I know whats going on.  It seems that each time through the loop 'OR-845 x I2C Create Configuration Reference.vi' creates a new reference.  After a while it will start to slow things down.  Better to open the reference before the while loop starts and spend just the reference in the loop.  Don't forget to close the reference after the loop stops.

• connection to the internet using time capsule

  I have problems connecting to the internet using time capsule. It detects my wireless network but will not connect to internet. I run ipconfig/all and it comes up with media disconnected. If I put any security on my wireless network, it finds the network and go on the internet with no problems.

  Thanks for the help in advance

  Hello Pudgex76,

  I suggest looking on the forums of Apple for more information if necessary:
  http://www.Apple.com/support/TimeMachine/

• I want to set the "latency time" on my map its Reltec to stop the delay on my lunch. Anyone know how I can do? Apparently I need to make it lower than 512 samples.

  I use a laptop Advent 9215 with a Reltec High Definition Audio Card Windows Vista

  Hello

  Available in media player option is to change the playback speed.

  Change playback speed in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Change-playback-speed-in-Windows-Media-Player

  You can also check with Realtek to see if there are options in the sound card's control panel to set the latency time.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow Internet but network shares are ok

  First of all, here is my configuration:

  Dell Inspiron 15R (5520) Windows 7 64 bit

  ASUS RT-AC68U

  PSI rated speed: 30Mbps

  All the firmware and drivers are up to date and windows updates are enabled.

  I recently bought a new dual band router and have completed the introduction.

  When I try to connect my laptop to this new router via wifi or ethernet, my internet speed is less than 5 Mbps.

  Shared folder from my laptop to the network is very good and the speed is good too.

  iOS and Android devices to the new road via wifi gets 30Mbps full internet speed.

  When I connect the laptop to the old router (not), my laptop is able to get internet 30Mbps speed.

  Is there something I can do to improve the speed of the internet to my laptop computer connected to the router dual-band new?

  Hello

  I understand that concern you. Let me help you with the issue.

  There could be various factors at the origin of the problem as a firewall router, firmware obsolete, obsolete network drivers, bandwidth, etc.

  Are you experiencing the issue when bypass you the router?

  Some instructions that you can follow as indicated below.

  1. Obstruct free paths between your router and receive computers. Physical obstructions more between your router and computer, the lowest, the wireless signal is likely to be. Place the router in a central location with clear lines of visibility on your computer will help boost the signal.
  2. Use a wireless Repeater. Sometimes, it is not possible to move a router and the computer to create direct sight lines, or a computer may be too far from the router to get a strong signal. A wireless Repeater takes in a wireless signal and sends it with increased resistance to increase the signal. Using a Repeater wireless between your router and your computer sends a signal around obstacles and can improve performance.
  3. Reduce signal interference. Like radios, when two wireless networks are in the same area, they can interfere with each other. If you know that another router wireless is close to you, you can move the router to another area or ask the owner of the other router to move sound.
  4. Reduce the use of the network. Sometimes slow Internet use on a wireless network is not the fault of the network, but that too many users are connected to the network. Disconnect other computers connected to the free network bandwidth, and increase the speed. It is also important to block free riders to connect to your network and slowing of setting up your router password protection. Check the user manual of your router on how to set up a password.

  I suggest you to first change the string in the configuration of the router page and check if the problem persists. If many people in your building using the same channel, then you might notice a slowdown in your Internet speed. Switching to one of these channels will reduce interference and possibly increase your speed.

  If the problem persists, then try to update the firmware on the router in router configuration page. Given that the laptop works very well on old router, maybe the new router requires compatible firmware to allow an intense sound signal from the router again.

  Just reply to us with the State so that we can help you.

• Slow Internet connection on Windows 7

  I have Windows 7 Home installed in my HP laptop. Web brosing speed is too slow on the PC. I have a fiber optic internet connection which has max of 16 Mbps download speed. The internet speed is good and reaches sometimes up to 10 Mbit/s, while it barely reaches 2 Mbit/s in normal mode. Most of the programs I uninstalled, run the registry cleaner by Norton, Scanner Malware bytes, regularly updated Norton antivirus definitions. I also installed only a few program - MS Office 2010, Norton Antivirus, Real Networks, itunes and HP provided software preinstalled with the laptop. Internet activity is limited to a few Bank sites and youtube. Like all the anti virus scan, spyware scans were not able to detect any virus or spyware, I'm at a loss to find any reason for the slow internet speeds. The speed of the internet is amazing when I use my tab Thosibha or on my smart phone Sony. Any ideas please.

  I have this noted in may 2013 and unfortunately do not have the restore point beyond June 2013.

  Hello Krishna,

  1. have you tried to update the wireless network card drivers?

  2. What is the brand and model of the computer?

  Method 1:

  Visit this link and check the information on the Internet which is slow.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  
  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  Try to update the drivers for wireless card and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. If you have any other questions feel free to respond and we will be happy to help you.

• I have 3G usb dongal restor, last week my laptop customer then after very slow internet. I'm already chek another PC & laptop but my good dongal speed

  I am faceing slow internet I have 3G usb dongal restor, last week my laptop customer then after very slow internet. I'm already chek another PC & laptop but my dongal good speed, tips I like them.

  Try to run the tool:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Updating your PC and install all updates.