Slow Internet but network shares are ok
First of all, here is my configuration:
Dell Inspiron 15R (5520) Windows 7 64 bit
ASUS RT-AC68U
PSI rated speed: 30Mbps
All the firmware and drivers are up to date and windows updates are enabled.
I recently bought a new dual band router and have completed the introduction.
When I try to connect my laptop to this new router via wifi or ethernet, my internet speed is less than 5 Mbps.
Shared folder from my laptop to the network is very good and the speed is good too.
iOS and Android devices to the new road via wifi gets 30Mbps full internet speed.
When I connect the laptop to the old router (not), my laptop is able to get internet 30Mbps speed.
Is there something I can do to improve the speed of the internet to my laptop computer connected to the router dual-band new?
Hello
I understand that concern you. Let me help you with the issue.
There could be various factors at the origin of the problem as a firewall router, firmware obsolete, obsolete network drivers, bandwidth, etc.
Are you experiencing the issue when bypass you the router?
Some instructions that you can follow as indicated below.
- Obstruct free paths between your router and receive computers. Physical obstructions more between your router and computer, the lowest, the wireless signal is likely to be. Place the router in a central location with clear lines of visibility on your computer will help boost the signal.
- Use a wireless Repeater. Sometimes, it is not possible to move a router and the computer to create direct sight lines, or a computer may be too far from the router to get a strong signal. A wireless Repeater takes in a wireless signal and sends it with increased resistance to increase the signal. Using a Repeater wireless between your router and your computer sends a signal around obstacles and can improve performance.
- Reduce signal interference. Like radios, when two wireless networks are in the same area, they can interfere with each other. If you know that another router wireless is close to you, you can move the router to another area or ask the owner of the other router to move sound.
- Reduce the use of the network. Sometimes slow Internet use on a wireless network is not the fault of the network, but that too many users are connected to the network. Disconnect other computers connected to the free network bandwidth, and increase the speed. It is also important to block free riders to connect to your network and slowing of setting up your router password protection. Check the user manual of your router on how to set up a password.
I suggest you to first change the string in the configuration of the router page and check if the problem persists. If many people in your building using the same channel, then you might notice a slowdown in your Internet speed. Switching to one of these channels will reduce interference and possibly increase your speed.
If the problem persists, then try to update the firmware on the router in router configuration page. Given that the laptop works very well on old router, maybe the new router requires compatible firmware to allow an intense sound signal from the router again.
Just reply to us with the State so that we can help you.
Tags: Windows
Similar Questions
-
Hello
I bought the latest samsung computer (notebook 9) three weeks ago. My laptop is very slow when I go on the internet. I have three other phones in my house and they all work very well. Is there any configuration that I should look because the guy told me that it is all the pre-configured.
Thank you
original title: network connection
Hello Pierre,.
I suggest that you look at this article from Microsoft that can help solve a slow internet connection: -
Network shares are slow with Vista Business SP2
Hello
I have Vista Enterprise 32-bit SP2 in a Hyper-V virtual machine. I use an internal application with strong interactions with a network share that is on another virtual machine on the same server. When I run the application on a server 2008R2, he completed in two minutes, which is expected. When it works on Vista, he finished in eight minutes (4 times slower), which is unacceptable. I am forced to use Vista because it is the last operating system supported by Windows Embedded CE 6.0 Platform Builder Service Pack 1.I tried to disable autotune and RSS, I added = 1 to HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\System CopyFileBufferedSynchronousIo, and I also tried safe mode with network experience. Nothing works.Is there something else to try? Is there a way to clone the network settings on 2008R2 for vista, because they work?The NIC reports it as: Microsoft Virtual Machine network adapter of Bus with a speed of 10 GB (10 gigabits) link.Thank youJohnThis Forum is oriented toward consumers. This type of question would be better asked in the Forums Pro Technet THERE.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro
-
When you browse a network share, \\LocalServer\Level1Share, with Explorer on an XP computer fully patched, the list of Level1Share has been quickly. If I try and open a file, say Level2Folder, I'll have to wait somewhere close to 2 minutes for a list. The share is on a Windows 2003 server, updated with patches, and the user has the appropriate permissions to the level of sharing and folder. Why and what can be done to fix this?
Hello
The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server support for help.
Hope the helps of information.
-
I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.
original title: problems with the router.I have no solution for you. It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.
In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers. This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.
Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers. If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you. See the list here: http://www.dd-wrt.com/site/support/router-database
-
I am connected to the internet, but my network sharing Center proclaims that I'm not.
The paradox connected but not connected
I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.
Any help would be greatly appreciated. Thanks in advance.
Hello
1 reboot as often, this allows the refresh icon and also stops a few things of
interfere with the slot troubleshooting process.Do a 1 Restore Point then you can go back to where you were if necessary.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html------------------------------------------------------
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
update the driver stacks.Now go look at the site of the manufacturer of the system for the updated drivers.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-----------------------------
Allow you to reset your TCP/IP stack just to make sure:
Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN
Enter these one at a time (or copy and paste) and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
----------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT.---------------------------------
Other tips:If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
complicated because there's probably more than one single thing, the origin of the problem)Others.
http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/
http://www.annoyances.org/exec/Forum/WinXP/1109372091
There are many causes, one of which is the small monitor pays attention to the evil network device.
You can try to disable any other network such as WiFi device and reboot to see if that has an effect.Still a problem of equipment such as a loose network card that is not properly attached to the computer can
cause this.http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm
I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?
As the title says.It's weird, and I think that this is the reason why some of my programs connect properly?Does anyone have a solution to fix this problem?Hi DamienDwyer,
1. are you referring to the status of job internet bar?
2 when the problem started?
3. have you made changes on the computer recently?Method 1
Try troubleshooting of network running.Use Network Troubleshooter event logs to solve network problems
http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problemsMethod 2
check the status in safe mode with network and display the results.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeMethod 3
I suggest you try the steps from the following links:Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsWireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions -
Slow Internet on a laptop, but fast on another
Hi, I have a windows 8, and whenever I am try to Watch youtube videos they are slow and show in horrible quality. My father has his own laptop and the internet is it fast enough so I know that there is nothing wrong with the modem. I learned that sometimes it's the drivers that make the laptop slow, so I deleted the drivers and after that the internet would be fast once again but after a few hours that he would go back to slow down. I have more drivers to uninstall and I don't know what to do to make the quick internet on my laptop. Thanks in advance for the answers
Hi Jesus,
Thanks for the update. You can visit this link and follow the steps on the post by Ruth Buruga said: slow Internet.
Let us know if you need more assistance.
Kind regards.
-
Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
HP Photosmart 6510 series connects to the network and Internet, but not the computer.
Hey all,.
I have a desktop H8-1228 and 6510 e - printer. I got both products at the same time. I did the initial installation, and everything worked perfectly. I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.). Recently, I made a trip for two weeks. I turned off the printer. This seems to have been a mistake. Now, he will only contact my network and Internet, but not the computer. The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer. I did this many times by printing the HP's Configuration Page from the printer screen. I also used Windows "Add a printer" without success.
I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel. A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation. There can be no. :-( I did the installation with the same problems that I had all the other times that I tried to install it.
No help from you the printer experts will be greatly appreciated. I'm not a novice as you can see. This situation, however, launched my posterior. :-))
Hi old_geekster,
You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.
HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
I would like to know what are the errors you receive?
-
All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.
Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Laughing out loud
-
I am faceing slow internet I have 3G usb dongal restor, last week my laptop customer then after very slow internet. I'm already chek another PC & laptop but my dongal good speed, tips I like them.
Try to run the tool:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Updating your PC and install all updates.
-
Dear all
I need help with the following problem:
Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.
Appreaciate help on this problem.
MSD
I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:
Using Photoshop | Photoshop help
To bookmark so that you can find.
-
After the installation of Photoshop its showing that no internet cnnection or time is incorect but two things are true can u please tell me what to do?
Hello
Please see solve common problems of activation and deactivation of creative cloud.
Hope that helps!
Kind regards
Sheena
-
Blue screen of death now very slow internet
I get a screen blue of death for a few months now, but never really sorted due to other commitiments, and also, it would be just blue screen flash and then restart automatically. I have not configured until recently to disable automatic reboot, but my computer has collapsed recently. I got these codes from the analysis of the recovery. I presume that these are from the blue screen:
table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}
Error code 1000008e c0000005 parameter1, bd053c97, parameter3, parameter4 00000000 b27bb8e8 parameter 2.
table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}
Error code 1000008e c0000005 parameter1, bd0b2ddd, parameter3, parameter4 00000000 b28f6bb0 parameter 2.
table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}} Error code 1000008e c0000005 parameter1, parameter 2 bd0b2ddd, parameter3, parameter4 00000000 b7ac7bb0
table. MsoNormalTable {line-height: 200%; do-size: 11pt; do-family: 'Calibri', 'sans-serif' ;}}
Error code 1000008e c0000005 parameter1, bd0b2ddd, parameter3, parameter4 00000000 b2d99bb0 parameter 2.
Often, I would get these blue screens when browsing the internet, but on occasion that it would take place when I played the games. also, my computer decided to turn every time, which is also a matter of concern. It wasn't until my most recent blue screen that my internet has slowed that crashed. videos loading takes forever and surfing the internet, everything takes more time to load up. I always defrag and have done a disc cleanup and virus scanning, but it says im clean. I do these regurly but my internet is still slow. Please help as it is very annoying. actually just trying to fill this took forever!
Hello
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available the OneDrive or other file sharing sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.
Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialDownload pictures and files
http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-----------------------------------------------------------------------------------------------
Are two main causes of this blue screen BIOS and video drivers - check with the system manufacturer's Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be that other drivers so check there. DISABLE the auto-pilot plant as those who are older and if Windows Updates suggest a pilot just HIDE. Antivirus is another possibility.
See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-BCCode: 8th 0x0000008E is the same as 0x1000008E
https://msdn.Microsoft.com/en-us/library/ff559271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Pavilion g6: g6 and I forgot my admin password bios [67372066]
I have HP Pavilion g6 and I forgot my bios password admin because I don't visit my bios for long settings. When I try the wrong password, it gives a number after the third attempt which is [67372066]. Please help how can I reset my password
-
RAID - 1 with 10.11.3 No longer editing
Hello I created a Raid 1 with two drives of 6 TB using the disk through the Terminal commands. Everything worked well. I've just updated to 10.11.3 and now the reader rises at all. I looked in the disk utility, and he could not see. I ran the disku
-
For windows SM bus controller drivers 7
Updated for win 7 on my Presario 6000 for children to use and abuse. Need drivers for the controller bus sm for windows 7 DVD and cd not recognized Yellow warning sign in device sm bus controller Manager Can you please help?
-
7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF
A week ago I noticed that the analyses using the ADF put a black line about an inch from the right edge of the page. This will not occur during the analysis of flat glass; only when you use the ADF. I checked the glass and paper tray are clean and
-
Music app compact Z3 won't find memory card
Hello Have a compact Z3. I transferred all my music on an SD card that I can get a space on my phome. When I arrived in-app music it does not find the music and it does not give me the opportunity to explore the phone to get the memory card? How can