Slow printing from Microsoft Publisher

Similar Questions

• Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

  Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

  Re: Update critical to correct a PC to printer communication problem, washer dot?

  Options

  • Mark as new
  • Bookmark
  • Subscribe
  • Subscribe to the RSS feed
  • Highlight
  • Print
  • Report inappropriate content

• HP Deskjet 1512: Cannot print from Microsoft word 2007

  Hello

  I recently bought a HP Deskjet 1512, it scans and copies without any problems, I am able to print images and files of e-mail, but it won't let me print anything from Microsoft Word (2007), I rebooted and reinstalled the software, I ran the hp doctor and nothing works I still can't print There is no error message and it is not in the print queue, it simply nothing if I click the quick print or preview before printing in word.

  Thanks for any help

  Jessy

  Thanks for the help dragon fur.

  Your answer does not solve the problem, but he did something worse either.

  I have it fixed now though it was a security issue blocking MicrosoftOffice to link to all connected devices.

• Slow printing from batch file

  Windows 7 (32-bit), I have a batch file that prints on the printer network HP LaserJet Pro P1606dn via lpt1 mapped.  I see that the printer gets the impression that the light will blink.  The problem is that it is 3-4 minutes before the page is printed.  Printing from a windows like Notepad is not slow.  I used to do this from a Windows XP machine without problem. What is I found out is that if I include a jump (hex 0c) in the file, I print back then printing is fast.  Any ideas on what I can do outside including a form feed?

  Thank you

  That being said, you could try to experiment the various settings of default data type in the part Print Processor of the tab Advanced of the dialog Properties of the Windows printer that uses your target LPT1: port.

  for example, change from RAW to RAW [FF appended] or RAW [FF auto].

  I have no idea if it will work.

• Cannot print from Microsoft Surface.

  Can I print from my Microsoft surface 2 with a HP Deskjet F4180 all in one?

  Hi Andy,.

  You can follow the steps in the link given below to print using Surface 2.

  Print and scan surface

  http://www.Microsoft.com/surface/en-us/support/hardware-and-drivers/print-from-surface

  Feel free to write us if you face any problem.

• How to print from microsoft reader

  How do you print a document from Microsoft reader. If I try to pint I tells me to set a default value in the control panel but can't find something to do. How I print these documents now is to open in Adobe reader and print it from there. It seems the MS Reader device.

  Hi Brian,.

  Thank you for your message and give us the opportunity to help you.
   
  I understand that you want to print from the Reader app.
  It is possible to print using the application once from the devices option in the bar of charms.
   
  You can use this link to set the default player application to view the .pdf files.
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default
  Refer to the section "to associate any type of file or Protocol with a program" on the article.
   
  Windows player: Frequently asked Questions can be found here.
  http://Windows.Microsoft.com/en-us/Windows-8/reader-FAQs
   
  Feel free to use the forum for any other issue of Windows, you may have.

• Photosmart 385 slow printing from the camera

  I have a Photosmart 385. When printing from the camera, it takes a long time to finish printing. No computer involved, it is used as a stand-alone printer for photographs. Thank you.

  HI Einarrson,

  Looks like the card you are using is having some problems. You have another memory card, you can try?

• Cannot print from Microsoft Office Home and Student 2010 military appreciation Edition on my HP Deskjet 3845.

  I have a new HP laptop and you tried to print with my HP Deskjet 3845. The only time it will print is when I troubleshoot or print my tax form. I have the pack family of software Office home and student 2010 Microsoft in the edition of military reconnaissance, but I got to the origin of Microsoft XP. They are not compatible? I'm just a user, and technical jargon goes over my head. I already go to solve problems and have not been able to solve my problem.

  Hi Jayne'sWarlock,.

  What happens when you try to print? What version of Windows do you have? Make sure you have the latest printer driver installed for the version of Windows you are using. Click here for options.

• printing from microsoft word

  I use Windows 8 and the HP Officejet 4620 printer all-in-one.  I printed before MS Word wrap, but now I can't.  Any advice?

  Thanks, I had already tried who. Since my post I have just reset my router and it is printing again! So far so good!

• HP envy 4504: unable to print from laptop

  Hello

  whenever I try to print a document in microsoft word 2013, that never works.

  It shows that it is printing but it ends almost instantly and does not activate my printer.

  whenever I try to print on my mobile phone it still works it's just with my computer.

  hope you can help.

  Hi printerboy666,

  Welcome to the HP Forums.

  I see that you are experiencing some printing problems when you attempt to print from microsoft word 2013.

  I have some suggestions that we can try.

  First, check the Microsoft web page for updates that may be available for the Word program.

  Disable firewall or anti virus protection before printing.

  Run the print HP and Scan Doctor just in case a problem is with the HP software.

  Let me know how make you out.

  Thanks for your time.

  See you soon,.

• HP Officejet 4630: Margins in Microsoft Publisher printer problem - 4630

  Just bought a new printer (see above).  I use Microsoft Publisher a lot and have had no problem with fixing the previous HP printer margins.   It does not work with this printer.    I put a.5 pour.55 for low high margins and left and right margins.  Worked fine in another printer.  Also, the images will not print completely.

  A decided to test the image on the page white and copied from the original page, and then glued on the blank page and pasted it in the exact area on the page, but when I printed, the image printed at the top of the page.  Crazy.  In addition, the picture is not all there.  For some reason, she is enlarged but part of it is missing.

  I test this in Microsoft Word, same thing with the size of the image, but he did copy and paste correctly.

  I just bought this printer and really upset.  I'm wasting so much paper to document student.

  I thank in advance and hope you have an answer.

  I answer to my previous post.  Even if I couldn't find the part where I set margins to reduce to a minimum, which apparently isn't serious.  I was able to keep my 0.5 for the left, top and right and 0.55 for the bottom.

  The problem was with the images, so I tried different ways to bring in the images.  I had to remove the images in the document of the registered editor, then started using the "Snipping Tool" in Windows 7.  What I've been able to do with the previous printers, is just COPY what I have snipped and paste it into the editor.  That didn't work, so then I tried to save a .jpg file.  Still had a bit of trouble, so saved as .png.   Well, now I can add my text to the images and it keeps the sizes.

  I think I'll try the .jpg stresses out me again I was really with all printing and paper waste, so I might have missed that .jpg would actually work.  Doesn't make sense that he would not, but it is not supposed that I can't paste the copy of the Snipping Tool, either.

  Boy, you wish that the print heads had not come out on my previous HP printer.  It was great.

  Thanks for trying to help me.

  Now, I don't know how to set this as resolved because I do not see this option here. then let me know, please, how to do this.

• How do I create a pdf from a Microsoft publisher file?

  How do I create a pdf from a Microsoft publisher file?

  File > print > printer Adobe PDF is a way.

  This assumes you have Acrobat.

• Only Microsoft for Mac 2011 Will is more printed from Outlook

  I have MB Pro 15 "it came with Outlook for Mac 2011 Home and Business. Yesterday morning, Excel, Word, and Apple mail will print.

  Absolutely no impression of Outlook emails?

  Hi mrgasket101,

  Thank you for using communities Support from Apple. I'm happy to help to provide resources to help you on the right track to be able to print from Outlook again.

  Since you are always able to print from other applications, specifically other Microsoft Office applications, then it seems that the printer does not work as expected. This is good news!

  When you print from Outlook, make sure that your printer is turned on and that you have selected it in the print of confirmation dialog that appears when you start printing.

  If you continue to have problems after that, then it's probably a problem with Outlook, how I would recommend reaching out to Microsoft for support with their application.

  See you soon.

• HP Officejet e4630: new printer prints images in Microsoft Publisher wrong.

  Hello.  I had to get a new printer and choose the HP Officejet e4630.  It's a simple printer, as I work as well, now.

  I create my documents to distribute lessons in Microsoft Publisher (2003) and includes images in tutorials.  I usually do the parts of the software to screen captures and simply copy and paste in the editor.   Never had a problem like this before.

  Now, when I print documents, the images are HUGE and out of the page.  I resize and they look great on the screen, but come out terrible when printing.

  I just had a class with several pages of documents to distribute up-to-date and had to make a PDF file and take to my husband printer to print, since there is the program I use to create.  Is not acceptable and does not know what the problem is.  I even took the screen shot and saved as .jpg, png, etc. and inserted in my editor program and that made no difference.

  Configure the printer makes no sense to me and options have locks on them, so I am at a loss.

  I bought the 21/08/15 and don't know if I can return it, so if you have answers for me, I certainly would appreciate it.  I really hate the return of products.

  Thank you.

  Oh gosh, I had given up on the Forum because it's been a while since I posted.  What I did was contact HP support and finished with a person to enter in my remote computer and checking the settings, etc.  What she ended up doing updates to the software (I thought that I did when I installed it, duh!) and then it worked fine.

  Thank you for your advice and will keep it in mind if needed, next time.

  Now, I'll post this message and then come back here and hope that I find the original so I can mark it as resolved.  I always so bad to find my original message when signing.  The forums are confusing to me, this way.

  Thank you very much.

• HP 14-r024tx Notebook PC: slow perfomarnce and crashes when you try to open Microsoft Publisher after restart/refresh

  Hello

  I just bought my HP laptop 2 months ago. Everything was fine, quick and convenient until the market a few days ago, it prompted a message saying that I need to update it. So I did, and thereafter, all my installed applications like Skype, internet browsers, etc., have disappeared. I tried to reinstall applications and all goes well but a bit slower. I thought that I needed to update some applications to improve performance, so I checked for some and tried to install the.

  Then yesterday, when I tried to open Microsoft Publisher, my laptop suddenly froze. The mouse and the keyboard didn't work so I had to turn off using the power switch. And every time I turned it on, everything was just slow.

  Can you help me solve the problem? Also, can you help me to speed up its performance?

  Thank you very much in advance.

  Hi @blissss ,

  Thank you for visiting the Forums HP's Support and welcome. I will do my best to help you. I read on your 14 HP - laptop r024tx with slow speeds. Thank you for all the information on what is happening.

  Something is slowing down the laptop. Have you installed some antivirus or firewall? If you disable what are your speed better. I got a DVD in my notebook that has slowed the process of starting a lot. You can check this.

  Here's a document on improving your system.

  Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.

  Please let me know how it goes.

  Thank you.