Slow start of server 2003R2

Similar Questions

• Cannot start web server on the executable file

  Hello

  We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

  As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

  I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

  When executing:

  • The code will sit in the while loop until I press stop.
  • Web server: Active Server = FALSE
  • Out error = ERROR No.

  

  In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

  It's the ini file to the executable file:

  [WebTest]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  server.tcp.serviceName = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "' + * '"
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  And it is the Web server configuration file:

  ErrorLog "$LVSERVER_ROOT/logs/error.log".
  LogLevel 3
  The default server name
  DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
  Listen 8000
  ThreadLimit 10
  TypesConfig "$LVSERVER_ROOT/mime.types»
  DirectoryIndex index.html
  LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
  LoadModule LVAuth lvauthmodule
  LoadModule LVSnapshot lvsnapshotmodule
  LoadModule LVRFP lvrfpmodule
  LoadModule dir libdirModule
  LoadModule copy libcopyModule

  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler

  AddHandler dirHandler
  AddHandler copyHandler

  "CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
  KeepAlive on
  KeepAliveTimeout 60
  Timeout 60

  As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

  I tried the things:

  • Copy a new default configuration file before the entry into force
  • Writing a predefined file (encoded) before initializing config
  • Definition to root before initializing directory (it actually generates an error because the server is not active...)
  • Set WebServer.Active = TRUE several times inside the while loop
  • Toggle the web server in the ini file

  System:

  • LabVIEW 2010
  • PC with Windows 7 running

  Thanks for any help, because it makes me crazy slow!

  Ben

  Hi Marco, thanks for the reply.

  I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

  If anyone is interested, here's the problem:

  The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

  This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

  AND

  You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

  The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

• Windows 7 32-bit slow start of blue circle hangs on the network icon in the tray for 10 minutes, some programs don't load until the problem resolves.

  Hello world.

  It will be long and windy.

  I have a problem with my Dell XPS M1530.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. Dell touchpad, magic disc, pda.net and perhaps language bar.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. i.e. open office, cakewalk sonar.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or cervix causing the problem. found nothing.
  • has ran the command cmd, I forgot what's it called some thing/something else. It digitizes and restores the registers according to me. did not help
  • Used pc AVG scanner. then corrected all the errors found and the questions. did not help.
  • reinstalled the network drivers. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the Enigma.

  im running Windows 7 Professional 32-bit. as if lately, about 3 months ago, my laptop started to start slowly and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away like internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a little more resources e.g. cakewalk Sonar. In addition, other startup programs and services such as Dell touch pad, magic disk, PDA. NEt don't start until after the problem goes away. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  Hey Kosmosis,

  I had the same problem, and after fishing trawl through the web to find answers, this is the most reliable solution that I found. At the very least, it will help to determine where the problem is.

  (1) reboot your computer.

  (2) go to Run--> services.msc

  (3) to sort the list by status (click the heading)

  (4) see those blocked at the 'boot '? These are your incriminated objects.

  Apparently, Windows has problems initializing services, and until he solves, or give up, he can't go the rest of the startup procedure. Different people get stuck on different things. For me, it was the 'Server' service as jams it for 20 minutes or more.

  You have 2 options:

  Right click 1)--> properties and change the Startup Type to "automatic (Delayed). This requires to load later, that hopefully allows all the rest at the end of initialization so that you can use the computer first.

  (2) read the Description of the service and see if you can find whats causing it to get stuck. In my case, 'Server' rule of network discovery, file sharing and printing. I realized that I UNPLUGGED a NAS from Buffalo, who worked as a print server as well. My windows was blocked to find a printer on a network that was no longer available. Remove the printer from devices solved the problem.

  If all else fails, you can always try to disable the service. This is probably not the best reccomendation, like its there for a reason, but it might help you to troubleshoot.

• Slow start. Error message at startup that says: c:\users\user\AppData\Roaming\adobe\sp. DLL

  Very slow start.  Does not load favorites. Internet does not not & c:\users\user\AppData\Roaming\adobe\sp error message. DLL

  The specified module could not be found.  Please notify.

  Hello

   
  1. All changes made to the computer before the show?
  2. What is the message you get from the Internet does not?
  3. What is a wired or wireless network?
  4. Are you referring to Favorites in Internet Explorer? What happens when you try to load a?
   
  Try the methods provided and check.
   
  Method 1:
  Step 1:
  Start the computer in Safe with networking and check if any problems persist, check especially startup and Internet connectivity. Check out the link and follow the steps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  If the problems do not occur in safe mode, and then perform a clean boot. Check out the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 2:
  Check out the link and follow the steps. Check if the computer starts always slow.
  Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/977419
   
  Method 3:
  To solve the network problem. Check the link and try the troubleshooting steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can also check out this link and try the steps.
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• ESX4 U1 slow start iSCSI

  All,

  It seems that, when one of my servers, all 10 of them, have a very slow start-up time.  When I look at the beginning upward, it seems that it's very slow list the iSCSI LUN.   I don't know why that would be.  It is very rare that I ever to reboot a server, but if I do, it seems that take about 20 minutes.

  Thank you!

  Do you perform on that host LUNS, which are not in use... Or you have mapped to this host LUNs, which are not yet added to the host?

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V), SNIA SCP.

  Please give points, so useful

• APEX application builder very slow start + Web site

  I ' am knows a very slow start of the APEX and APEX Web sites on a Windows 2003 server and a base of XE. I see very long waits (75 sec) for the status of virtual circuits. Is there a resolution to this problem?
  
  Edited by: WebMees NL on July 8, 2009 19:33

  Hello:

  Connect to the database as the user "sys".

  select name,value from v$parameter where name ='shared_servers'; --- current setting
  
  alter system set shared_servers=5 scope = both; --- change setting to 5 
  

  CITY

• iMac slow start was fast

  My iMac, with 1 disk of merger to, was very quick to open the OS since multinational April 2015, then suddenly became very very slow to open recently.  For example the Apple logo appears in a few seconds and the load in a few seconds more.  Now the Apple logo minutes to load.

  Latest version of the OS is 10.10.5.  It's 3.1 GHz Intel Core I7 processor.  The memory is 16 GB 1600 MHz DDR3.

  No idea why the slow start happening?  Any suggestion would be appreciated.

  Thanks for posting a report http://etrecheck.com/ EtreCheck

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.

• Satellite X 200 - 25i - slow start on

  Hello

  This cute portable X 200 - 25i and everything you've just bought a few weeks ago works great. But I just realised, it this slow start. It will take about 3 minutes to load all the software, and I did install something special... everything is factory shipped Vista, antivirus software for my mouse logitech...

  I also replaced a disk, what WD 320, and the first with the OS is the original...

  Any help? Any ideas?

  Thank you all very much...

  Hello

  My notebook booted up like a turtle. Do you know why?
  Because many applications have been installed in the autostart folder or in the registry, run entry and this affected the start-up procedure.
  I had Norton Antivirus installed and loaded always at the beginning.

  I read that this software needs of too many resources and slows down the performance of the laptops.
  I removed and instead of Norton, I use another program called Antivir antivirus.
  It s freeware and my notebooks starts much faster than with preinstalled Symantec Norton Antivirus.

  I recommend also using a small tool called CCleaner.
  It repairs the registry of the operating system and remove all garbage and junk of the system.
  It s really nice

  See you soon

• Slow start for Satellite Pro P300 P

  My P300 has a slow start and takes forever to exceed the windows page. Any help on this?

  Hello

  My laptop starts slowly because I had too many processes running in the context of the BONE.
  I disabled it in msconfig.
  I think you should try this too.

  In addition, you must update or remove tool TEMPRO.

  Check it!

• Satellite Pro - Slow start up and sound is messed up

  I had my * Toshiba Satellite Pro * with * Windows XP * for a good few years now. She has always worked like a gem and only gave me no problems until a few weeks ago.

  A few weeks ago I was downloading a program and with it the virus 'Antivir Solutions' very undesirable and unliked. I've done everything I can to get rid of this disaster (with the help of the support forums) and I think that I managed to get rid of it, but since my computer has not been the same.

  I had trouble downloading a PDF document, a few days ago and it froze so I tried to restart that caused the computer to have a hissing fit, remove my user account which meant I had to configure everything again from scratch. And, now, the computer takes a good 45 minutes from the moment you press the button "ON" when it is ready to start working. Not to mention, it takes a good 10 minutes every time you click on an icon for the program to start actually...

  I tried to defrag the system and you have tried to uninstall unused programs to speed up the computer, but it did not work.
  I also ran several anti-virus (e.g. Norton, AVG, Microsoft Security Essentials) to make sure that I don't have wicked not spoil me, but they come clean.

  May I also add the sound is messed up also. If I use the built-in speakers or external speakers, the sound is disjoint and broken. Like any video I have play.

  I don't know what to do.
  I can't really afford a new computer, but I need my computer to be reliable. I use my computer for 12 of the 24 hours a day...
  * What can I do? *

  Hi nicoletrist,

  I put t know what laptop you have exactly, but I think that the slow start Windows is caused due to viruses you have or had.
  A few years ago I also had a virus and it was causing a very slow start to the top, he did take up to 10 minutes until Windows has been loaded and the only solution to get rid of this used Toshiba recovery disc.

  I would like to recommend you. Use the Toshiba Recovery disk to restore to factory settings and save your data, because everything on the HARD drive will be erased.
  I'm sure after using the laptop recovery disk will work like a charm again! :)

• Close slowly in the night and slow start morning

  I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help me I appreciate it.

  Thanks to you all.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Slow start on Vista Home Premium - Satellite U400-15B

  Hello

  I just bought Satellite U400-15B and am finding it takes very long to start Vista, I went into msconfig and disabled the things I don't use and stuff that I think is not necessary, but it is still having to wait ages before that I can use the laptop. I have enough RAM and processor speed, so I don't think that the specifications of the laptop are a problem

  Is there something that can be done on this slow start, any help would be appreciated.

  Thank you

  Hello

  I think slow start or laptop slow operations depend on good configuration of the OS. I played with this last month and I am now convinced that Vista starts and runs on my laptop.
  I wrote about this in another thread and if you have time look under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Please let me know what you think of this.

• Firefox has slow start up &amp; I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

  Firefox has slow start up & I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

  This has happened

  Each time Firefox opened

  == update to 3.6

  You may need to use questions Troubleshoot Firefox in Safe Mode (click on "Safe Mode" and reading) to locate the problem. Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode. When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure." A test to see if the problem you are experiencing is fixed.

  See:
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  Solve problems with plugins like Flash or Java to solve the common problems of Firefox
  Troubleshoot and diagnose problems in Firefox

  If the problem does not occur in mode without failure, then disable all your Extensions and Plug-ins, and then try to find out who is causing by allowing both the problem reappears. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit). You can use 'Disable all add-ons' on the start safe mode window.

• Satellite U400 - color of the shell of edges and slow start of the housing

  Hi all

  Just bought a Satellite U400-15B and am loving the laptop itself but have the following two issues.

  First of all, regarding the case I noticed that on the edge of the high gloss base (where he meets the not shiny black plastic bottom) the paint is already peeling.

  It is mainly about above the left USB port, CD drive in Rabat and at the rear above the battery (only visible when the lid is closed). It is very minor and is only visible when looked at her carefully, but obviously I paid a lot for this so do not want to look all worn in a few months. Someone at - it? I took a look at a few display models and its mixed, some are worn in areas similar some are perfect. I would like to exchange it, but I'm afraid that the replacement can be another problem like a dead pixel or may have the same problem only worse?

  Second, I noticed that my laptop takes a long time to start compared to my old Toshiba A200 which also runs Vista. I removed a lot of bloatware and the Toshiba TEMPRO, which I heard is also causing problems, but I still have this problem. It seems to start fine until the Vista logo screen then it takes awhile, while displaying "Please wait".

  Anyone has any ideas on this?

  Hello MrAK

  If the laptop is brand new and you have a few days only I recommend you contact your dealer as soon as possible and. Talk with them and explain that you don't want to have replacement with dead Pixel or something like that. I hope they will understand you and help get new but 100% good laptop.

  Slow start is discussed several times. I have Satellite A300 and commissioning was horrible, but now, after a slight modification it starts after only 1.5 minutes.
  Check my ad under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Bye and good luck