SMART fail to start
After starting the computer remains on the Toshiba screen.
If I press F12 at startup and choose option 2: removable devices it seems to start normally.
This message is also displayed:
SMART failure predicted hard disk 0 TOSHIBA - MK2018GAP (PM)
WARNING: Immediately back up your data and replace your hard drive. A failure may be imminent.
Press F1 to continue.
It has not disappeared to this message the last time. When he did, I pressed F1 and it starts normally.
What should I do? I have read that it is not fatal and does not necessarily require drastic measures? Any ideas?
PS. I tried to post this message before last night, but nothing appeared on the forum. I don't see what I'm doing wrong.
Hello
In my opinion, you must make sure that all important data is backed up. Do not rush out and buy another hard drive.
I put t know which model of laptop, you use, but might be a good idea to check on the warranty. It's always covered, you might as well get a new drive of Toshiba. They will install it and reload the base image.
Tags: Toshiba
Similar Questions
-
Equium A200-1V0 - SMART failed on start
Hello
I bought an Equium A200-1V0 just for more than a year. My problem is that he went really slow and really fast heat-up to the top.
Now ever time I switch on a message appears
"SMART failure provided on hard disk 2: Toshiba mk1237gsx-(s1).
WARNING immediately back up your data and replace your hard disc.a failure may be imminent. »The laptop does not load on normal mode. There on the days just to check if it does load eventually but no result.
All the world has experienced the same problem and found a solution?
What I need to replace the hard drive or the problem to solve if some how to recover the laptop (I only ask because I read on another forum, he worked)
Also, I have not received a recovery with the portable disk where I get that from?Any help is appreciated thank you!
Hello
SMART failure says it all! You need to replace the HARD drive permanently and that is also the reason why the laptop doesn't start in normal mode. Your HARD drive is defective and must be replaced!
Reinstallation of the operating system using the Toshiba Recovery disk doesn't solve this problem. A failed HARD drive has nothing to do with the OS and software.
Also if you have Vista you can create a recovery disc yourself. Normally on the first boot, you get a message that you should burn this disc using the Toshiba Recovery Disk Creator.
If you didn t it yet you can order a Toshiba recovery disc directly:
https://backupmedia.Toshiba.EU/landing.aspxGood bye
-
I have a hp pavilion g7, Windows 7
Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
The display screen reads-
Memory test: past
Smart check: past
Dst short: failure
Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
Product ID: A7A44UANBA
Hard drive 1
Starting test: failed
Where should I go here for this problem?Hello
Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced. It is also compatible with startup problems you describe.
If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...
Kind regards
DP - K
-
the application has failed to start because its side by side configuration is incorrect
I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect
Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
You can try to use the sxstrace tool to see if you can find which files are missing or damaged. -
Tecra A9 fails to start because of system file is missing
Hello
I bought tecra 1 month and now I can't open my laptopIt has windows xp pre installed and fails to start windows
because the file system is missing.
What can I do?
I don't have a floppy drive to insert the startup disk
Help, please!Hello
Why you need a floppy disk?
As far as I know this laptop has an internal CD/DVD drive.
I think you simply boot from the Toshiba Recovery CD and must be reinstalled the operating system!If all goes well it s not a serious fault because sometimes this seems due to HARD drive failure.
But like I said above usually the new installation of operating system restore CD for this problemGood luck
-
Re: Satellite A300 sometimes fails to start
My Satellite A300 sometimes fails on start when displaying a logo of Toshiba.
I don't know why. Y at - it a touch to show a p.o.s.t. tests?Sorry for my English.
Hello
You can change in the BIOS the option to boot from normal to fast.
I think that this will disable the Red Toshiba log and show you the post screen.
But to be honest, I don't know if this could be help full.
In any case, if the laptop is unable to pass on the MESSAGE, something might be wrong on the motherboard; the modules, memory example or similar -
Hello
Once in a while (almost once a day), my A500 fails to start.
When I hit the power button, weird lines appear on the screen immediately, and it seems that there is not a lot of power goes to the processor.
It will stay like that until I hit the power button to stop it.http://img52.imageshack.us/img52/5418/20112010747.jpg
It seems to start fine if I leave for an arbitrary amount of time before trying again.
Any thoughts?
See you soon.
HM. For me, it looks a bit like a motherboard maybe hardware problem or GPU.
You are able to access the BIOS?
Please try this and set the default BIOS.
In addition, I would recommend setting the notebook back to factory settings to check if an improvement is noticeable.But if his equipment really then issues you should get in touch with a local ASP you know
-
HAB check failed for start / could not validate the boot image
Hello
I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:
HAB check failed to start
could not validate the boot image
Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.
Are there opportunities for the device?
If you can't make an external reset via hardware buttons, then your phone will have to service.
-
Satellite P100: HARD drive sometimes fails to start or just not responding
I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.
Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.
Although it seems not take a long time.
Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.
any ideas or help greatly received.
DavidPost edited by: daviddean
Hello David
It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.
It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).
Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.
-
DSC error: IAK_SHARED failed to start the service
When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service. I'm using LabVIEW 8.6 with DSC 8.6. I tried to run one of the examples (the example of the heat exchanger). Any ideas? I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC. Shall 8.5 DSC be uninstalled everything first?
Thank you
Tom
Hi Tom,
This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.
Gregory C.
-
Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll
I get error 80080005 when you try to run windows update. I followed this to the fact that the Windows Module Installer fails to start. Using ProcMon I could find this TrustedInstaller.exe fails to start. It is a failure due to the following:
TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUNDI searched and cbscore.dll is actually under:
C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0
I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance. Can someone tell me where TrustedInstaller.exe gets this way? Or, more generally, how can I solve this problem?
Thank you!
The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?
Installed Updates lists the the system update tool... (KB947821)?
I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: youcam /camera fun zone
How can I solve the problem / the application has failed to start because its side by side configuration is incorrect is the message that is displayed
[Moved from comments]
Hello
Thanks for posting your question on the Forums of community of Microsoft.
1. don't you make changes to the computer before the show?
2. which version of the operating system is installed on the computer?
3. when exactly you get this error message?
You can uninstall all existing Microsoft Visual C++ Redistributable Package on the system and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.
Uninstall existing Microsoft Visual C++ Redistributable Package
Reference:
http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program
To reinstall the latest Microsoft Visual C++ 2010 Redistributable Package
Reference:
Microsoft
Package redistributable Visual C++ 2010 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84Microsoft
Package redistributable Visual C++ 2010 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867Hope this solves the problem.
-
Original title:
Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.
Hello
1. what version of Windows is installed on the computer?
2. are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.Method 1:
Step 1: Perform a boot minimum troubleshooting and check which application reports this error
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.Step 2: reinstall the application.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programMethod 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833I hope this helps.
-
Original title: microsoft security scanner is Guy accounts.
It shows the following error - the application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. can u please help?
Hello
You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.
Method 1:
Step 1: To uninstall the package:
a. open programs and features.
b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.
c. click on uninstall at the top of the list.
Step 2: Download and install the latest package and see if it helps.
Before you download, you can check am I running the 32-bit version or 64-bit Windows?
For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)
For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)
Method 2:
You can try to perform a clean boot and check if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.
-
Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe
the application has failed to start because its side-by-side configuration is incorrect
Hello Pecky,
Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:
http://windowslivehelp.com/product.aspx?ProductID=2
Thank you
Maybe you are looking for
-
Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, p
-
Change of processor Tecra A8 (S8414)
Hello. I have a Toshiba Tecra A8S8414 T5600 processor and I want to change it one more powerful than the example P8400 or P7350. I want to know if posibel.
-
Hello I have a small question on an example of clock by RTSI source. In my configuration, two PCI cards (PCI-6602 (dev2) and PCI-6110 (dev1)) are connected by a RTSI cable. I would like to build a clock on 6110 source sample and use it on 6602 counti
-
I use a USB 2.0 TV BOX (its software is "InterVideo WinDVR") to activate my old family videos VHS and DVR (VCR/DVD via RCA cables drive) of video files. The files are anywhere from 4 or 5 MB .5MB (mainly), with one or two files like 7MB, depending on
-
For my Xpera Z mobile, when the album has been updated at the latest, I found that some of my Album folder where I put new photos recently, these pictures show in two files with the same name of real single folder in the SD card. Those who are behavi