SMS and call does not work after a long operating life

Similar Questions

• BlackBerry Smartphones SMS and MMS does not work after 10.26.09 software update.

  I have the Verizon BlackBerry Storm 9530. When I try to extract the SMS and MMS messages, I get the following message: Eception exception: java.lang.NullPointerException. After hours on the phone with Verizon, they blame the people of BlackBerry. So now I have no possibility to send SMS; the send or receive. Other than, I'm very happy with the update. Can someone help me? Thanks, Bouldaire

  Of course, this does not either. I then did a restore of my office and 'bingo' everything works fine. I'm still distraught about the java error message; but luckily he is gone and everything works fine. Thanks for your persistence and time with me. Best regards, Patrick

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• Why by default fonts and color does not work after the upgrade to version 31?

  As mentioned on, my default fonts does not work. Any type of police that I've changed, he always showed the times I think that a new font Roman.
  pls help me thanks

  Problem solved. The character encoding for the outgoing is false, I change to the West. Then its ok now

• My iPhone 6 and safari does not work after update 9.3!

  I did the iPhone update this morning 9.3 (13E233) and now my research of safari do not work.  I can get, but then when I click on a result, nothing happens.

  Does anyone else have this problem and any suggestions to fix it?

  A temporary solution is to disable JavaScript. Go to settings > Safari > scroll down to advanced options > enable JavaScript. This will only fix issues in Safari and you will probably still issues opening links in other applications, but it's better than nothing.

• The water on the keyboard and it does not work after that I cleaned

  Ispilled a bit of water on my keyboard lapyop and wipe immediately, but it's still not working what can I do

  Hi lizfs,

  Give, it drying time and see if that helps.  If not, chances are although the keyboard has gotten watered (pardon the pun) with some type of short circuit or something and must be replaced.  With laptops, the water passes also through the keyboard to the components below, then it may be fairer than.  Computers many do not like water.

  Try contacting the manufacturer of the computer for advice and assistance.  Most keyboards can be removed amd which may help to speed up the drying or show more obvious shorts or water that you missed.

  In the meantime, you can try to attach a USB keyboard to be able to use the computer.  If they can not will not help (and this test will narrow the magnitude of the problem, if this keyboard works or ID a broader issue, if it's not), then your only real choice is a local reputable computer repair shop (NOT Geek Squad or any like that) to see if something can be done.

  Good luck!

  Kosh

• Ring of blackBerry Smartphones Urgent-bold 9000 and audio does not work after upgrade to 5.8.8.822

  Updated yesterday at 5.0.0.82 2 and now DO NOT ring the phone.

  Also get the message "an error occurred attempt to play media" for all types of media even when I test the profiles.

  Battery pulls and all the usual stuff, but no help.

  His camera work.

  How to downgrade OS and that is should I go since it is not good?

  Hello

  Make sure that you run software that is released by your carrier found here: http://na.blackberry.com/eng/support/downloads/download_sites.jsp

  Download and install the latest version of the software on your computer, then follow this link to complete a clean reload of the BlackBerry Device software.

  Link: http://bit.ly/cKy9A0

  Test before you restore all backups.

  Thank you

• User32.LLB call does not work after compilation

  I am trying to determine if running the LabView program has the focus, and I realized that when I run the program in LabView, but as soon as I compile and try to run the program it freezes and spits out this error.  The program worked end until I added the User32.llb calls.  If anyone has ideas of how to do to solve this problem would be great.

  Thank you

  Mike

  Make sure you have only user32.dll in the control of 'the library name or path' in the configuration of the node library call and not the entire path to him. Also, make sure you don't end up with a copy of user32.dll in your data inside your built-in application directory folder. All the core Windows dll may not be be copied like who will be upset Windows resources management seriously.

  Having only as the name of the DLL in the "name of the library or the path" tell LabVIEW that this DLL must be considered pre installed on the target system and must not be copied in the generation of the application. It is documented in the online help for the node library call. All Windows DLLs should be treated like this and any other driver DLL that comes with its own Installer and is installed in the or the Directory.

• P0R94EA #ABU: brightness and HDMI does not work after driver update

  Hello

  I get a notification to update my drivers for HP Support Assistant that I took and I installed all the drivers involved and since that I can't not change the brightness of my screen or use the HDMI for display on my TV. I don't have the updates has been "Intel high definition (HD) Graphics Driver.

  Can someone help me with this please have tried different things from other sites, but nothing has worked.

  Hello

  Is there an improvement if you install the earlier version at the following link?

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72107.exe

  Kind regards

  DP - K

• Creative process of cloud and Lightroom does not work after one week

  I installed lightroom, photoshop and creative cloud 30 days trial a week ago.  It was great to work for about three days, and then slowly lightroom stopped responding whenever I opened it, and each time was worse.  Now I can't open it.  Icon creative cloud on my screen has a red exclamation point and shows nothing but empty window with the timer of rotation if I click on it.  I would really like to continue to use my trial before I have buy the program.  Open lightroom, so I can export the photos I was working.  Can help on a MacBook Pro, someone help me?

  I couldn't leave creative cloud, nothing happens.  I really couldn't do anything but open photoshop... which is not what I want to use.  I'm so uninstall all and try vacuuming, I read on... and then reinstall it.

• Photon: WiFi and 4G does not work after update to 45.2.7

  I just installed the update 45.2.7.MB855 on my Photon Sprint 4 G and now my 4G and WiFi lights. When I go to network & wireless settings and click on WiFi, everything he says is error and nothing happens. When I try to turn in 4G, nothing seems to happen.

  I'm able to turn on Bluetooth and 3G made a few updates to profile to make it work.

  I live in the Las Vegas area and 4G is available.

  Please advise,

  Keith

  Find the solution here. If you have any comments please leave it on the other thread.

  Double locking this thread.

  Mark
  Support Forums Manager

• Ethernet controllers and network does not work after reinstillation on Dell Inspiron mini.

  I don't know what to do. The computer that I'm not talking is not connect to internet at all. Whenever I am trying to reinstall the drivers, I get a message saying: it can't find the driver. I tried to download this from official website of intel and load it into my laptop via USB, and I get the message that no adapters intel are presnt. Take note of the fact that I am on the plan technology challanged and that it is probably just an id10t error. Please I really need help. It is also on Windows XP Home Edition.

  You must visit the support Dell for Inspiron model Web site. you will find the correct drivers for all your hardware, not just networking. You're probably missing other drivers too.

  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Enter your serial number is the way the fastest section pilots. Make sure you only select the XP operating system.

  Alternatively, you can have the CD of drivers supplied with your Dell printer. This should "autoplay" to help you to install all the necessary drivers also.

  Tricky