Similar Questions

• NET snap works does not properly in mode double screen.

  If you host my party of liberation last night, I hooked a second monitor for the first time. 7 overdraft and configure properties for correct display fine. But, when I went to her to show the "Snap" function, he had a strange quirk. To grant the full screen to a window for each display fine, but the function of the software component plug-in mosquito net only works on the outside edge away from the monitor. It would not align itself with the inside edge on each monitor. So, I finished with a hole the size of half of each of the 2 screens on my extended desktop. I'm sure that there is no setting to change this, but perhaps Microsoft could apply a patch in one of their updates.

  The "inside edge" your desktop is extended on several monitors is not an advantage, it is a staging area. The snap going to the edge of the desktop computer, not the monitor.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Scaling of objects that I joined - objects are distorted as is snapping on a grid?

  I joined two circles to create a stick, and now when I adapted form Adobe Illustrator CC 2015 (and thus prior CC), it distorts, as if it's slam on a grid.

  I disabled "align new objects to the pixel grid" in the transform, as well as 'snap to grid' palette under the notice.

  In the image as an attachment, you will see the two original black circles in the background.

  I copied and pasted to the front, then joined the forms manually (by removing the closest points, then join the open ends of the circles).

  then he red color with transparency to illustrate what is happening.

  When I size things down, the difference becomes more apparent:

  

  It is IMPOSSIBLE to even manually place objects on each other.

  The Red shape is aligned away from the circles below.

  Another example:

  The S (below) has been created manually. When I reduce it in scale, corners it's become distorted and deformed. the same spaces between the lines of the S appear to block some grid and deform.

  

  m,

  Are you sure that the objects are not aligned to the pixel grid, already?

  Here is a more complete description, including the two options:

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• Snap guide until a shadow merge option?

  Hello

  I have a work of art I want perfectly select and/or cultures. The work has a shadow, but when I select the content in the layer, try to crop or use guides, everything aligns the object in the layer, not the 'extended' object which includes the merger of options with shadows - litters.

  Is it possible to align the ruler guides, guides cultures or tool to all the contents of one layer so it includes the layer + blending options? I understand a screenshot below.

  https://www.dropbox.com/s/qpsde4t0mlb3zv3/snap%20To%20blending%20options%20does%20not%20wo rk.png? = 0 dl

  Thank you.

  Cultures are rectangular and all layers will be cropped not only the layer you are interested in.  Layers can be any shape.   If you Ctrl + click or CMD + click on the content icon of the layer in the palette layers, transparency of the layers will be selected. If you follow that with a culture of the Image of the document will be truncated to which delimits layers. If you turn off the visibility of all the other layers, you can save on a png will have a transparent background RBZ the contents of the layer. Note the dropshow outside the boundaries of the layer is no for the canvas not to fall.

  

  If you want shade you select the shadow, there will be paintings to fall. You can do that by creating a layer to chip away at and rasterize the shadow select and disable or delete the layer.

  

• Do not snap to point

  Oohhhhhh, really frustrated here!

  I have two lines and I'm keen to the end of the single-track point to align on the other line endpoint. I moved the end point to exactly where the other is, but instead of slamming correctly at the end it comes out if snaps on 0.5px away from him - there is no way I can get it to align correctly unless he decides to walk away.

  Any ideas?

  Align to grid pix's in the transform palette.

  

  Is quite a unpopular feature when you do not need that. It is also an option int the flyout of transformation so that the newly created elements will be either access the feature to turn on or off.

• Snap unwanted at the edge of the artboard

  I came across a problem/annoyance that I don't remember having seen it before, even if I use Illie for the donkey.

  I was followed a model manually. For more precision, I got turned off guides and I also disabled Snap to Point.

  I had the plan of work hidden because I didn't need to do this and there are no guides in the region where I worked.

  All of a sudden one of the anchor points climbed to something and is stuck there and I could not set accurately. It was far from what I tried. Weird, I thought.

  After a bit of tweaking and a cuss Word or two it turned out that the strange behavior was because my anchor point was trying to align an edge of the artboard hidden.

  This behavior is normal and can it be turned off?

  Of course, my solution was to move my drawing away from the edge of the artboard. I could also have changed the size of the artboard, but this seems a bit silly as I hid it anyway.

  CS3, by the way.

  There is a light solution.

  Disable all Slam, particular nod to point. Turn on the guides. Set preferences > Smart Guides< snapping="" tolerance="" to="" 0pt.="" that="" should="" eliminate="" the="" artboard="" snap.="" even="" with="" the="" snapping="" tolerance="" set="" at="" the="" default="" 4pt="" you="" can="" eliminate="" most="" of="" the="" artboard="" snapping="" with="" smart="" guides="" on="" (might="" still="" get="" a="" 1pt="" snap="" though).="" this="" works="" for="" cs5..="" not="" certain="" about="">

• I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

  I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

  I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

• Change direction 'Point At' and 'Snap alignment to the Motion?

  I use the dot to the and also the Alighment Snap application behaviors and this work with the Green axis as the "forward" direction arrow, but this isn't the 'front' of my work. You can turn the anchor? How to change the default direction for these behaviors?

  Thank you!
  Scot

  Maybe you should try to change the setting of the axis in the behavior?

• Letters from far far away

  Hello everyone, I need help with the iMovie app for Mac. Love I´d to use "far far away" title but the letters are going to fast, someone knows how to slow them down? Thank you very much

  Hello

  There used to be a problem of speed on the far, very far, which has been resolved by the upgrade to iMovie 10.1.2.  The upgrade would be your solution if that's your problem.

  If you already use 10.1.2 so you can make the title more slowly scroll by placing your cursor on the edge of the title element in the timeline and drag the clip of the song so that it develops.    Further you drag it, the slower the scroll with get.

  I hope this helps.

  Best,

  Rich

• Page in my MacBook Air will not go away. Online request to call for assistance for Mac. Virus? How can I get rid of him?

  Page I can access through Safari won't go away. Tells me to call a phone number ' 'support for Mac online.' " "Virus? How can I get rid of him?  Cannot use Safari at all.

  Restart the computer and when it restarts hold "shift" when you click on Safari.

• How can I erase the data on my laptop before I give it away?

  How can I erase the data on my laptop before I give it away?

  See this document.

  https://support.Apple.com/en-us/HT201065

• Is there a downside to the creation of a partition in windows on macbook pro? My gut says run away!

  I went to the macbook pro away windows as much as possible; I have no idea why any company still working windows. Unfortunately I have hardware that is 'windows only' and I'm debating setting to the top of my macbook to be able to run it. Where my question. Any advice is welcome, as I said, my gut says RUN and simply use a second computer (windows at low cost version) when I need to work with the material.

  Rather than create a Partition to Boot Camp for Windows, it is possible to run Windows in a virtual environment using software such as Parallels Desktop.

• Using HomeKit away from home

  Do I understand the instructions re using HomeKit away from home? I read the instructions that I have to have an Apple TV, or I can't use HomeKit away from home. What is the correct understanding? Thank you!

  It depends on the product, but yes in some cases they use an Apple TV as a hub so that you can access the service by far.

• AppleTV2 - I want to DO AWAY WITH all the 'blue' buttons REPRESENTED next to episodes of TV Show without SUPERVISION.  How?

  
  

  
  

  -FINISH WITH-

  
  

  
  

  BLUE BUTTONS

  Hello!!!

  Episodes of APPLE TV2

  
  

  -J' got about 120 left to watch! -

  I want to finish with all the BUTTONS BLUE shown next to all my TV episodes, all of which are showing I still have not watched one of these episodes.

  I tried marking them all as "Unwatched" on my iTunes player - that works very well on the iTunes Player on my MAC, but, yet, "blue keys" still appear on the AppleTV2.

  1. Can I do away with this blue button manually?
  2. Or should I, in FACT, go through the MANDATORY hassle to watch each episode individually?
  3. Is alternative and using Player like QuickTime, actually do the work?

  Select the TV program, press in and hold the Center button on the remote and choose Mark as watched in the context menu.

• 38.1.0 do the spinning red thing in the lower right corner GO AWAY

  This new rev is screwing up a lot of my settings. Do the new line at the bottom with the Red spinner lively GO THE FUCK AWAY.

  I already disabled this track "flashes" of scrap.

  https://support.Mozilla.org/en-us/KB/Thunderbird-calendar-integration
  >
  You are also free to disable the lightning at any time in the addons Manager, but in order to make it easier to identify the numbers to come, it is recommended that you leave active and hide the features that you do not use.
  >

  No, I won't leave it enabled. Its just bloating of the software and make my CPU work anymore. I'm not crazy use for this.

  You see it in safe mode?
  (Help menu > restart with disabled modules)