SOAP connection method and Session keys

Similar Questions

• Satellite L300 - 'W' and 'F' keys not working do not - cannot open a session

  Hello

  I have a Toshiba Satellite L300.
  My 'F' and 'w' keys do not work and because I have a built-in HARD drive password containing these letters, I can't start my computer.

  I got a problem "starting" a few months back, and what I had to do was restore my laptop to an earlier date. I did it through management of Boot at startup. The only thing is that I don't remember how to do it now.

  I can't find the restore disks that could come with my laptop - so the only way I can do, thanks to a Startup Manager.

  So, how do you do a system restore? or y at - it another way to solve this problem?

  Help, please! :)

  Hello

  If I understand your case, the HARD disk password has been set and now you are not able to boot the laptop because the password can not be typed due to the defective keyboard.
  Right?

  Hmm, replace the keyboard buddy I think it's just the ideal solution.
  Of course, you can try to plug an external USB keyboard but I don't know if it will generally work at the BIOS level, it should work, but in the worst case you will need a new internal keyboard m.

• Recovery v1 in cisco IPS SSL Session key

  Hi all

  In network audit, I have the comment mentioned by the auditor for cisco IPS 4270 device. but I don't get any solution for the same thing. Kindly help me out on this.

  V1 SSL Session key recovery

  The remote SSH daemon supports connections made

  using the version 1.33 or 1.5 of the SSH

  Protocol. These protocols are not completely

  cryptographically safe so they should not be used.

  With respect,

  Sashi

  Currently there is no way only allow SSH version 2 and disable SSH version 1 on IPS.

  Here is the request for improvement which have been filed for your reference:CSCsk84977

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk84977

  Hope that answers your question.

• Generate public and private keys within the smart card

  Hi all
  
  I use this code to generate public and private keys within the smart card.
  
  KeyPair kp = new pair of keys (KeyPair.ALG_RSA_CRT, KeyBuilder.LENGTH_RSA_512);
  kp.genKeyPair ();
  PrivateKey prikey = kp.getPrivate ();
  PublicKey pubkey = kp.getPublic ();
  
  This code runs without error.
  
  I need to obtain the public key of the smart card. So I need to get the public key to a byte array.
  But I can't get these keys in array of bytes of plain text.
  
  The methods I can get for pubkey object are
  
  pubkey.clearKey ();
  pubkey. Equals (obj);
  pubkey.getSize ();
  pubkey.getType ();
  pubkey.isInitialized (); only these.
  
  I use
  Eclipse Version: 3.4.1 (level of agreement of the compiler = 1.4)
  Jcop plugin (to connect with the real map and to test the java code in virtual card provided by JCOP)
  OmniKey5321 (characters without contact) card reader
  
  What is the reason to get those above methods pubkey object? Is it a version problem?
  How can I get the public key in ordinary byte array? Is this possible?
  If it is not possible, is there a way to get the public key as a certificate of export or something another solution?
  
  If my script is not a possible strategy, how can I use private public keys to send the applet-specific data? Is there a better way to do it?
  
  Published by: 863766 on June 6, 2011 12:16 AM

  RSAPublicKey pubkey = kp.getPublic();
  

  then

  pubkey.getExponent(...); pubkey.getModulus(...);
  

• JavaScript: SOAP.connect () fail with NotAllowedError

  I try to call the javascript method SOAP.connect () of a self created the menu added by app.addMenuItem (). If I call SOAP.connect () in the AppInitialisationContext, it works perfectly, but calling it 'cExec' will fail with NotAllowedError: Sicherheitseinstellungen verhindern den Zugriff auf sharp characteristic oder method. (refusal of the call of function or property security permissions).

  Surrounding the SOAP.connect () with an app.trustedFunction (to get a context of trust) will fail with the same error message.

  The PDF I have loaded in Adobe Reader 9 (free edition!) is granted with rights of forms, the indicator required of F (the API reference) should not be the problem.

  The Javascript is located in the user home (and app dir of drive); both shows the problems mentioned above.

  Is this a problem with the free version of the reader or a (solvable) permissions problem?

  Thanks in advance
  Hendrik

  What LiveCycle Reader Extensions Server can grant rights to the form ("F").  The activation of the reader in Acrobat will give you only save rights ("S"), it cannot grant rights to form.

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• OfficeJet 8620 two problems one) Win7 firewall connection wifi and b) the printer multi-network

  Bought the printer this afternoon and set up a computer - connection to a printer with wifi as advised in the closed paper work and CD. No problems.

  When I put it in place of the second computer (with wifi) using the CD provided, I received an error message that the hp software can see the given IP address printer but he could not automatically connect using the "typical connection method. Tips in the dialog box has been to change the settings of firewall computer method of 'typical connection '. Any advice on what this might be. Looking at the Win7 firewall, all HP printer software are checked for the home network and the public. What else the firewall must Win7 allow to operate the automatic printer connection?  BTW, I followed the advice of the installation software and punted for the moment. The warning by the software that was if the printers IP address changes, I'll have to manually change it into the computer with the firewall issue (ugh).

  That leads to the second problem:

  A couple of my computers are ethernet only. No wifi. When I plug ethernet to the 8620, it defines an IP address for itself on ethernet, but he abandoned the wifi IP address. How can I feel some ethernet connected computers and some wifi connected ones.

  Any constructive advice is VERY WELCOME.

  I apologize in advance if there is already a solution posted either of these problems; I couldn't find searching them the forum.

  Lenny W.

  Hi lennyw07016,

  Thanks for letting me know that worked for you.

  I suggest the setting up of a static IP address. In this way the router will always assign the same IP address to the printer.

  Printer does not keep the wireless connection.

  Proceed to Solution 3: printer of the assign a static IP address.

  Here is a document for configuration of a firewall to allow a connection with the all-in-one Windows.

  You can check if you like.

  Thank you.

• After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

  After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

  Hello

  What operating system is installed on the computer?

  Method 1: I suggest that you follow the instructions from the link and check if that helps:

  http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

  Method 2: Follow the steps in the link and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• can not connect password and username on.forgot

  can not connect password and username on.forgot

  If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

  To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

  See also http://support.microsoft.com/kb/321305

  Other than the foregoing, this forum has a policy that prohibits assistance to crack passwords.

  Tricky

• How can I change the default actions of what made the PC when I connect a camera, USB key, etc.?

  How can I change the default actions of what made the PC when I connect a camera, USB key, etc.. My Samsung intensity II is what I need it for; I want to shoot to the top of this window asking me what to do when I plug in, but one day, I was not thought and press on 'No Action' with the "always perform this action for this device" (or said something like that) checkbox checked.

  Once it is connected, go to my computer, and your camera photo or anything else that should be there.  If is isn't, it is a completely different issue.  It's done, right-click on it and select Properties.  Click the AutoPlay tab.  There is a version of dialogue enough of this "window asking me what to do."  You can figure out what to do from there.

• WMP 11 says connect burner and restart the computer

  WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer

  Hello

  1. do you get an error message when you try to download files?
  2. you have any third-party burning software installed on your computer?
  3. do you have Internet Explorer 8 is installed on your computer?

  Follow the steps mentioned below and check if it solves the problem with Media Player:

  Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See Your CD or DVD drive cannot read or write media

  Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.

  Refer to this article for help:
  http://support.Microsoft.com/kb/306084

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• E4200 access via a browser is low. Password and wireless keys must be the same.

  I tried to change my admin password to something I just want to know. When I did, I was told that the key and wireless admin password must be the same. What madness is this? I have to give my children the key to enter the system there. I put parental controls for device there. Now all owe it do is google this router and read and then they can understand the key and the password are the same. Log in to the router and change parental controls.

  I thought about a work around that. I would give them the key to access as a guest. It was great if they were going to use a browser to surf the Web. Guest access does not work for me on other devices such as iPods and iPads. In my tests on these types of devices applications cannot get on the Internet with guest access. That a browser can.

  Thoughts from cisco? No help from cisco on this?

  Do not use Cisco Connect and you'll be able to have the password admin and "wireless key" be different without problem.  I don't know why Cisco Connect is doing this, but if you go to http://192.168.1.1 with your web browser after using Cisco Connect and you connect to the web GUI admin here, you can manually set your admin password and the "wireless key" However desired.

• wireless multimedia keyboard Microsoft 1.1 on my desktop using Vista home premium and the keys are coming all wrong

  I have a multimedia keyboard 1.1 microsoft wireless on my desktop using Vista Home premium, and the keys are all coming up badly, when I type 'k' for example I get 'a' or if I type 'p' I get 'v' and give me space '9' someone can tell me how to solve this problem?

  Hi Winchesterdream,

  Welcome to the Microsoft answers community site.

  I suggest you try the following steps

  Step 1: Connect the keyboard to a different computer. If the keyboard works correctly on another computer, the port to which the keyboard was connected on the original computer may be damaged. If this is the case, contact your computer manufacturer to find out how to repair or replace the damaged port.

  Step 2: Download and install the latest keyboard software

  To download the latest drivers for the keyboard that you use, see the following Microsoft hardware Web site:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Step 3: Press the SHIFT key to turn five times keys Stick On or Off and check if the problem persists.

  Let me know if it works. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  KKS Vijay

• Remote Desktop connection fails and no error__

  I am running Windows Vista SP1 and I'm unable to connect using desktop remote

  The client connects, authenticates and the ' remote configuration session window opens and then closes immediately back to the connection dialog box. There is no error logged in the event viewer on the client or the server.

  The problem started after the computer has restarted and Windows Update tried to install SP2 again, which always fails.

  Telnet works fine but no remote desktop

  It is my media server and all my media devices that use it also so more work :(

  I tried a system restore, which breaks down - it seems that the update failed has corrupted this way

  The question seems to be down to the following, which is connected between the log error message and log events

  Code integrity determined that the hash of the image of a file is not valid.  The file may be corrupted due to an unauthorized change or the invalid hash can indicate a potential disk device error.

  File name: \Device\HarddiskVolume1\Windows\System32\rdpdd.dll

  How can I fix it?

  Finally, everything seems to work again - another problem caused by Windows Update. He changed the crazy firewall settings on my domain controller. Aaarrgh!

  Now to disable Windows Update and block access to the Windows Update sites.

• Monitor is empty and the keys have no effect on anything.

  Monitor is empty and the keys have no effect on anything.

  With the computer off, I disconnected the power and removed the battery.

  Then I pressed the button On and connected to the power supply.

  The battery light and the touchpad light began to Flash.

  Then I turned off the computer and insert the battery.

  Then I turned on the computer and it began to emit beeps, 1 long and 2 short beeps.

  Thanks SeanS

  I was finally able to run.

  With the battery removed, I plugged the power supply and any of the top row of lights came. I pressed the power button until all lights are off. I then pressed the power button and started pressing on and releasing, pressing on and releasing, pressing and releasing, etc key F8 for about 10 seconds, and then the computer started to operate normally.

  DaMar