Software account down from the system tray?

Similar Questions

• Power Guard icon repeatedly disappear from the system tray

  Original title: WINXP Pro s ver.2002 / SP3.

  I have WINXP Pro s ver.2002 / SP3.  The power icon keep disappearing several times from the system tray?  I have restore but when I restart the laptop, they're gone. This also occurs in the Volume icon at the same time. Do not remember what has been loaded or were able to do.  This fine all worked until the day. Now I have to live with almost a one-time problem by sinister using the sound properties and uncheck, Power Options apply and then check, apply the box "Show icon in the taskbar".  I tried some fixes automatic Microsoft (I think) Web site but no real chance in the long term.

  Hi JayBregand,

  ·         Did you do changes on the computer before the show?

  ·         Who are the automatic patches from Microsoft have you tried?

  Follow the suggestions below for a possible solution:

  Method 1: Try to add the icon again and the Coachman. If the problem persists you can read the following article and check.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

   http://support.Microsoft.com/kb/319095

   

  Method 2: Create a new profile on the computer and check if the problem persists. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know if that helps.

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• volume control disappeared from the system tray and will not let me add in the Properties menu

  The volume control has disappeared from the system tray, when I open the Properties menu, it won't allow me to check the box to display the volume control

  Hello

  As method 1 is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Internet connectivity icon is missing from the system tray.

  I run Vista Home Premium SP2. My internet connectivity icon is missing from the system tray. How can I restore it? Thank you.

  Hello

  This should help you.

  If method 1 is not available to you, use method 3:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  See you soon.

• Update icon is missing from the system tray

  Salvation Windows XP experts,

  My "Automatic Updates" is set on "download updates for me, but let me choose when to install them", but several times I don't get the icon in the system tray, and it is until I want to shud down my laptop when I get the message "click on disable to install important updates and turn off your computer. , and if I work on the batteries, I don't even get this message. Sometimes I change my setting "Notify Me but don't automatically download or install" hoping that icon will appear, but it's not.

  Recently, I have been informed of the 2 updates to download and agreed, but they got downloaded the icon has disappeared... and when I lock my PC, I got this message because I have new updates have been installed, I clicked on the button "turn off". I was surprised when I saw him on the screen saying 1 of 1 updates is being intalled! I pressed the power button until it exploded and then restarted, it, went into the folder Windows to know he was installing the single update, is not one of the 2 updates that I accepted on! What a f * ing system?

  What can I do to see what updates will be installed on my PC?

  Thank you

  z

  Hello

  If I understand well, you have a little problem with the 'automatic update' - in particular with the notification in the system tray icon. The icon does not appear in the system status bar when updates are ready for instalation - does?

  There is a similar but opposite problem - system "Auto update" displays the icon in the system tray – as they may be new updates installed, but the updated window does not update after clicking on the icon in the system tray:

  http://www.eggheadcafe.com/Microsoft/Windows-Update/29682120/Automatic-Update-icon-stay-on-system-tray.aspx

  So, this has been resolved by removing the "C:\Windows\SoftwareDistribution" directory "C:\WINDOWS" folder

  (before deletion was stopped the service "Windows update").

  What you can try:

  (1) this Fix IT (full reset Windows Update components - including registration of libraries, to rename files ...)

  http://support.Microsoft.com/kb/971058/en

  2) install the latest version of the Windows Update Agent (for good communication with the WWW of Windows update server)

  http://support.Microsoft.com/kb/949104/en

  3) only recommend - install the latest IE (IE8) (Select language)

  http://www.Microsoft.com/download/en/details.aspx?ID=43

  (4) this Microsoft Genuine Advantage diagnostic (I hope that will be the pages of the SITE in English)

  http://www.Microsoft.com/genuine/diag/

  enable to download ActiveX and validate windows

  I confess that I have not read previous answers (PA bear MS MVP) in detail, it is possible that you've already tried this. However, I tried this, if I had similar problems.

  LC

• Icon "Remove items" missing from the system tray

  Original title: remove items

  Gone are my icon on the taskbar that you use to remove something from the usb port. How do I eject something by USB safely without my computer

  Hello

  It seems that the icon may be hidden in the system tray. Try the steps in the following methods and check the status of the issue.

  Method 1:

  Show or hide the notification area (system tray).

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-the-notification-area-system-tray

  Show all icons in the notification area (system tray).

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-all-icons-in-the-notification-area-system-tray

  Method 2:

  Try to run the following command in administrator mode.

  (a) open a command prompt window, try the following steps:

  i. click on start > all programs.

  II. click on accessories.

  III. right click on prompt and then click Run as administrator.

  (b) in the command prompt window, type the following commands and press ENTER:

  ·         rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  Note: the command is case-sensitive.

• Volume icon missing from the system tray

  Original title: 'LOST' ICON

  I've lost the 'speaker' icon which is usually at the bottom of my screen that allows me to adjust the volume on my PC.  How can I get the icon back?

  Hello

  Thanks for posting the question on the Microsoft Community.

  I understand that the Volume of the system tray icon is missing. I would certainly help you to fix this problem.

  I suggest to perform the steps of troubleshooting of these links and then see if the Volume icon appears in the system tray.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  How to display the Volume icon in the Notification area in Windows

  I hope this helps you make the Volume icon on the system tray. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• My battery, sound and network icons have disappeared from the system tray. I tried to fix with some resolutions that I found on the internet, but still no go...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Read the tutorial above.

  See you soon.

  Mick Murphy - Microsoft partner

• type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do? __

  type it the password of the account, it says the user profile service Service failed the profile logon.user cannot be loaded.on from the system restore, it said: System Restore could not start. What should I do?

  Have a look here:
  http://support.Microsoft.com/kb/947215
  or here:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• New HP Photosmart 7520 won't print from the photo tray

  EDIT: He will feed from the phototray if I print the photo in Windows Photo Viewer.  However, he still refuses to print directly from the jpg format, even if I specify explicitly in all the settings I want to print a 4 x 6 from the photo tray.

  Is this a normal behavior?

  I guess it would print correctly from other photo editing and look at software, but haven't checked that yet is not sure.

  PREVIOUS POST:

  I just got this printer and cannot print from the photo tray.  He printed from the phototray during installation and configuration, but it was the only time.  The rest of the time, when I try to print a photo, it selects only in the regular paper tray.

  Is there a magical procedure involved?  I have an operating system of Windows 7 and just installed on the HP site.  I uninstalled and reinstalled, but it still does not work.

  I load a sheet in the phototray, make sure that the correct printer is defined, select the paper size (in this case 4x6in photo sample provided with the printer paper), select HP Everyday Photo Paper, glossy paper, click on print and the printer does not take into account the phototray and prints from the regular paper tray.

  I've scoured the web and answers do not solve the problem.  It's very frustrating.  If I can't get this resolved in a day or two, I will back this printer and will try another brand.

  

  

  These settings should always print to the Photo tray.

• All the sounds that are specifically related to the Microsoft system works not-missing the system tray volume control and Accessories Entertainment empty folder.

  I have no volume control icon in the system tray and my Accessories Entertainment folder is empty.  I can play the sound through iTunes and VLC media player but is no longer the Player Windows Media can play CDs or mp3 files.  I have more Microsoft system sounds and the sounds of a large number of online streaming sites no longer play unless I can their route via iTunes or VLC media player.  Windows Media Player says missing codecs if I try to play mp3 files.  I have upgraded to Windows Media Player 11 to see if that would bring codecs, but without any result.

  My problems were not related to the missing CODECS.

  I knew the sound on my system was basically correct, given that I was able to listen to free VLC Player I downloaded to replace the Windows Media Player while he was not working.

  However, the solution to my problem of noise was really simple, but the answer was just very complicated track.

  I noticed that a lot of the chatter about similar problems on other forums was related to Adobe Flash Player.

  I had recently upgraded to the latest versions all Adobe products on my system.  I didn't make the connection that Adobe software could affect all the sounds of Microsoft.

  Finally, after doing a Google search on Adobe Flash Player issues, I found a partial solution:

  Here's an exact quote:

  Very well, the problem is really the wavemapper mapping in the registry of Windows such as reported by a member of the forum.

  All you have to do is to open the registry editor by going to start menu, run, type regedit, then Enter.
  After that, in Registry Editor, navigate yourself in the left pane until you reach

  My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32

  And then in the pane, right-click and click New, select string value, enter "wavemapper" (without the quotes, of course), ENTER, enter "msacm32.drv".
  Come in.

  Well, of course, it didn't work the first time. I received this message:

  the Registry Editor cannot rename the new value #1. The specified value name already exists. Type another name and try again
  
  I was puzzled for a while, until I saw someone in the forum with a similar problem mentioned that they had found a fix for this problem by granting permissions subkey. This led me to Google search for registry permissions.

  After that here, that's what I had to do, and although it seems that a lot of steps, it's really very simple:

  Once I had reached the drivers32 registry entry I pointed out the entry in the right pane. Mine said (default) REG_SZ (value not set). I then clicked on change on the Bar Menu and clicked on permissions on the menu drop down.

  This opens the permissions for Drivers32. I highlighted at the entrance of the Administration and click the Advanced button.

  This opens the "Advanced Drivers32 security settings. I made sure that I was under the permissions tab in this window. I noticed that the box called "inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here"was checked. Yet once, I did ensure that the entrance of the Administration has been highlighted and then I clicked on the button change.

  This opens the "permission for Drivers32 entry. I chose "this key and subkeys" apply to: falling to the bottom of this window. Then, I checked the full control checkbox. I clicked on OK.

  I clicked on apply advanced Drivers32 window security settings.

  I clicked on apply permissions for Drivers32 window.

  Once that I had done it all a lot more entries appeared in the right pane for Drivers32 including my wavemapper entry. This is where all along; Quite simply, there is not all the permissions to do anything, including being in the registry pane.

  I left the registry and now all my sounds are back and the volume icon is once again in my system tray. Who would have thought?

  Hope this helps someone else.

• Satellite1900 dull display at startup of the system + lack of functions in the system tray

  Satellite 1900-803 OS - XP - Home (SP2) has developed an error at startup, it starts, but has the matte screen (the equivalent of the lowest screen brightness setting) and a few icons missing in the system tray in the task bar, (ie. icon remove a security device, mousepad icon & hide the unused icon button), only fix I found is to do a system restore , that everything returns to normal, icons etc, restored once the screen not more problems occur even after hibernation, (restore point should be a point of automatic system generated manually created)

  Have you checked the drivers to display, bios updates, control panel in utilities to display etc., all seem correct and up-to-date, can anyone help, I checked the forums but not found anything similar, I checked, the reset screen FL inverter connections, but no change, dysfunction on AC or battery.
  suspect a software problem? BIOS problem?
  machine is 4 years old, and no real probs so far a complete system don't have reinstall (to the iradicate virus that I couldn't get rid of all ok after that, enough compatent during the disassembly of the machine and basic repairs but depths of software are becoming my cleats of knowhow:D about 1 year ago
  any help would be received with gratitude
  concerning
  Iain

  Hello

  I read a few topics on missing icons in the system tray. It seems that it s is a windows bug.
  Please check these messages from the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14392
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15065

  Maybe it helps.

  I can t say too much on the matte screen. Of course, if the Fl inverter is dead the display appears dull but you issue sounds a little different. The problem doesn't persist all time. That's why I think that it s not a frequency inverter. Usually, the Toshiba power saver is responsible for the brightness of the screen. You should check the settings of the single power supply modes. Maybe you switched between different modes of energy and the brightness of the screen has also been changed.

• HP Officejet want 5740: HP Envy does not print from the photo tray

  All of a sudden the printer refuses to print from the print bed.  I sat down today and photos of 4 x 6 successfully printed iPhoto.  When I went the second impression, it would only print from the paper tray.  All the settings are correct.  The window of the printer poster paper in all trays of correct size.  The printer settings are correct. I tried to restart the computer to reset, but in vain.

  Hi @KarenPM,

  I understand that you are having problems to print from the photo tray. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Here are the steps to print the photos. HP ENVY 5540, 5570 Deskjet and Officejet 5740 - print photo printers.

  If you're still having problems, it may be a damaged printer driver, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try another application to see if you have the same results.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP Envy 5660: yellow triangle in the system tray

  I have a yellow triangle that appears at the bottom right of my screen - in the system tray - on top of the blue question mark HP.   I can't get rid of it.   It's the same thing every time - there are two errors (Windows and iOS) telling me that my printer is not on the network.

  My printer works fine.   It will scan, copy, print, and send emails.   It is not a problem.   It is true that I turn it off for several days at a time, but I don't like to waste energy.

  I followed the instructions in the Windows message three times.   The triangle back in an hour or a day.   I do not receive messages on iOS, because I use this system on a Windows computer.

  This triangle is present - continuous - for the last six weeks, I just tried to ignore it, because there seems to be nothing wrong with the computer and a diagnostic printout tells me the e-mail address computers and said that things are fine.   The way I use my printer, it works fine!

  I just want to lose the triangle!

  @Steve3491

  Try / consider:

  Click on the blue? to open the wizard from the HP Support >

  Click settings > scroll down a little ways >

  Under Choose how you wish to be informed >

  UNCHECK all the boxes > Save

  HP Support Assistant will probably disappear from the taskbar.

  Pouf.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.