Software Center all-in-one A940

Similar Questions

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function?

  The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function? If not, all printers HP still have this feature?

  Hello

  Please try the following alternative:

  http://www.PDFCore.com/p01_advancedpdfutilitiesfree/feature_09.html

  Kind regards.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• HP Officejet 7400 series: installing software HP all-in-one cancels before the end

  After the upgrade to Windows 10, my HP OfficeJet 7400 (wireless) series has lost the ability to analyze.  The HP Solution Center responds with the message "cannot run because your installation of the device is not complete.  I ran printing HP and doctor Scan and it said that "the complete office solution for your product is not installed on this computer" (even though it worked fine w/Windows 7 before the upgrade).  Continuing through the stages of printing and doctor Scan, you are prompted to install the software all-in-one series I initiative.  He gets successfully to the menu of Options of Installation of revision.  I check out the review and accept the check box and click Next.  At this point, it passes to the "prepare the system for the installation" and for the briefest of moments he says software removal.  But then the operation will stop and the program ends without having to install the software and drivers.  I found a log file pushing files and shows that I am an ERROR_INSTALL_USEREXIT 1602 - the user cancels the installation.

  Although my situation seems to be a bit different that other issues addressed in the forums of HP, I've tried every fix suggested in those and nothing works.   I also downloaded Windows Scan and scan HP and Capture and cannot find my scanner.  The print function, however, works with the supplied Windows 10 driver.

  Any thoughts?  Thank you!

  Hello @Bill_M1,

  This is a great place to visit for a community support and HP! I see that you are not able to scan and you encounter problems during installation. Thank you for providing all of the steps that you have already tried. I wish I could help you.

  I would uninstall the old printer drivers Windows 7 install and reinstall the most recent drivers.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  Here is the driver: Full_Webpack - 140.0.408 - 5-AIO_CDB_FSW_Full_Win_WW_140_408 - 5.exe

  How is the printer connected?

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Software print all-in-one HP Officejet J4550 not taken support in Windows 7

  I get a software error when I or Windows 7, try to install the printer drivers and the control software which says that the software is not supported in this operating system. Went to the HP site and downloaded the 64-bit software (installed 64-bit system) and it came with the same error. Is there a solution to this problem or is it being developed?

  See how this isn't the final version of Windows 7, I'm sure that a lot of material will not work at the moment.
  One thing you can 'try' is the 32-bit version of the drivers instead of the 64-bit... ;)

• drivers for my HP 7410 all-in-one printer

  Can I download drivers for my all-in-one HP 7410 printer on my laptop, and transfer them on a disk, and then on my desk. I don't have a wireless to the desktop.

  Thank you

  Hey Heezie. You can certainly do. Then tranfer to another computer, you will need some sort of storage such as a USB device, a disc external hard or you can burn them on a CD. What operating system do you use?

  Here is the link to the drivers: Driver & Software Downloads - all-in-one printer, HP Officejet 7410

  You provide me what operating system you were using, so I couldn't give you the direct link to the drivers. In the link above, you will need to choose your operating system. Select the driver tab, and then download the "full feature drivers."

  If you have problems to find the pilot informed me to your operating system and I will point you to the download.

  Thank you

  Sean

• HP Envy all-in-one 120th: 10 Windows on a 23-n001na A-I-O desire

  I just installed win 10 and the printer above requires a password for wireless connection. I tried to reset the router computer and printer etc., but to no avail. Run the app troubleshooting all looks ok, but I can't get around the password issue. Help please.

  Hi @budgie-burden.

  By your post, I see that you are prompted for the password for the wireless connection, since the upgrade to Windows 10. I'd love to help you.

  Here is a document to find the HP printers - find your wireless WEP, WPA, WPA2 password (Windows).

  You will maybe uninstall and reinstall the new software of the printer, after that the restoration of the default printer, if it is not present on the network. Drivers and Full Feature 120 printer software e-all-in-one HP ENVY.

  Restore the default network: go to the configuration Menu of the printer and select restore default network, select Yes.

  Run the Wireless Setup on the printer in the Menu Setup, Wireless Setup Assistant.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• HP DeskJet Ink Advantaje 4535: HP DeskJet All in One-4535 driver problem

  Hello, I do not know if this has been posted before, if it were, I'm sorry.

  I recently bought a printer from a store in my country, HP all in one ink advantage 4535. The box came with a small cd with software (4530 all in one set), but I use a macbook air with no CD is useless. I could not find the driver for this printer anywhere on the web or on your site. Can you help me please?

  Hi Routzi,

  Here is a LINK from hp.com for drivers and software for your Mac.

  Let me know if this solves your problem!

  Thank you

• How can I get my HP F380 all-in-one printer scanner, copier control with Vista

  F380 working with Windows xp in all modes, but now it just prints and gives me no control other aspects of the copier of analysis and control, because I loaded Windows Vista.

  Hello

  Follow the steps below and check if it helps.

  Method 1: I suggest you download the drivers from the website of HP support- Driver & Software Downloads - all-in-one printer, HP Deskjet F380.

  Method 2: Run the printer Troubleshooter and then check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• HP deskjet 3510 e - all in one printer

  My printer has stopped printing and scanning manuly but works on e I pad2 printing I tried all settings with no results, you can have launched me operations to manuly to foot print and also leave on e print fine .joe is

  Hello

  Try to remove and reinstall the printer... you can find the S/W in the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5157483

  Choose the operating system and download the driver

  Drivers and printer full feature software e-all-in-one HP Deskjet 3510

• Photosmart C6380 all-in-One: Photo ink instead of printing ink (Dutch HP)

  My printer keeps using ink photo instead of the printer ink, but it seems to me impossible to change. I found a solution somewhere on the forum to check the box "use black ink only" in preferences > advanced > grey but it is not this option in the Dutch version...

  I have already tried several things: cleaning the printerheads, handed over to defaultsettings, try changing preferences with the HP ePrint, printermaintanence of the printingheads and cartridge, etc...

  Please help me to be able to use my printer.

  

  Welcome to the HP community @IrisvdL,

  I stumbled on your post about how you cannot select this option to print in "black ink only" when you try to change the settings of the printer for you Photosmart C6380 and I wanted to answer. Although I'm not familiar with the Dutch language, I suggest you make sure you download and install the full feature software and driver on your computer to have access to all the options of the printer.

  Click on this link to download the driver and software: series all-in-one printer, HP Photosmart C6300/6324 full feature software and driver

  If that does not give you the option of selecting black ink only, then I would recommend contacting HP directly to see if a technical support representative can connect remotely to your computer to help others.

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• 7310 all-in-One: connecting the HP Solution Center to all-in-One

  When you try to install for my 7310 HP solutions Center which is connected via a wireless network, I don't get this option to connect even though the Help menu shows that this option should be available.  I checked the network and it is there and I can print over the network.  I need to use the other features of the all-in-One, (e.g., Scan) so need the solution Center. Please let me know how to overcome this problem of connection.  Thanx.

  Hi @led7310,

  Thank you for joining the HP Forums!

  I have seen your post on how you try to connect your HP solution for your HP 7310 printer Center. I'm happy to help with this problem!

  Please, try the steps in this guide, printer not found during Network Driver Setup (Windows). If this does not resolve the problem, maybe try scanning without HP software. Scanner without software HP (Windows 7).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!