Software for Windows XP will run also in Windows 7

Similar Questions

• HP Officejet J3680 all-in-One: Officejet J3680 will install no software for Windows 10

  The complete software for the J3680 will not install on my new Acer Windows 10 PC (6 months). I don't have the codes error, but when undo them the installation process continues from referring to Windows 8 and I made sure that the software that I chose was supposed to be for Windows 10. I went through the entire process, including all the trouble shooting process, and yet it will not be installed. 3 hours ago and I'm not impressed. This same machine and software worked fine on my Windows 7 PC.

  Hi @rgslondon,

  Thank you for joining the HP Forums!

  I understand that your software HP Officejet J3680 will not install on Windows 10. And I'm happy to see it for you!

  Please, try the steps in this guide, "device installation failed" or "unknown device" message during Installation USB (Windows).

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• B110a Photosmart All in One printer loading software for Windows 7

  Have a new unit but software will open in Vista, but not for Windows 7, try CD, download and also such HP Officejet Pro 8500 A909A recommended by HP centre. Still get fatal error code 08573521 also mentions the MSI file. SCAN. Any body recommend a solution to loading the software for Windows 7-bit

  Thank you

  Bob

  HI - go ahead and try following the steps described in this document.  I'm not sure that identifies the specific error, you see, but take a look through the document and it should offer a few suggestions that might solve the problem.

  Hope that helps.

• HP 2055dn Printer Laser software for windows 7 does not work

  Have tried several times to install the software for Windows 7 64 bit on my HP 2055dn printer.  Used called download: P2050-full-solution-AM-EMEA1-v6.1.exe.  Still doesn't give me the software, even if the window "uploaded successfully" appeared.  Printer works fine.  I want to be able to access the software with the function ToolboxFX.  What can I do else?

  OMG.  I finally have my ToolboxFX now.  I went to the HP support & downloaded the program page:

  P2050-Full-solution-am-EMEA1-V6.1.exe

  It wasn't the 1st time I tried to install this program (for Windows7 64 bit).  Today, it worked.  I feel like the little engine that could!

• Pavilion dv4 1318TU: DigitalPersona software for windows 7 64 bit

  I need setup Digital Inc. Personic pimp rreader printer software for windows 7 64 bit... I have 32 bits that did not work in this help please so me as soon as possiblke

  Hello:

  See if this version works for you...

  This package provides the Digital Persona fingerprint reader software for portable models supported and operating systems.

  Fix and improvements:

  Improves the performance and usability on the Microsoft Windows 7 Operating System 64-bit editions.

• Media Center always asks me to install windows messenger. cannot find software for windows messenger. Where can I find it?

  each visit to the media center reported that (MEDIA CENTER cannot OPEN MESSENGER.  Please install windows messenger. Went to the microsoft site and cannot find the software for windows xp to download. Help

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=edd9bdcf-16b0-4678-9bbd-e9b429296246

• Qosmio G50 - Toshiba Courtyard Core software for Windows 7 x 64.

  Hi all

  I have a request.
  I am the owner of the Toshiba Qosmio G50, I bought to running Vista ultimate x 86 and is the gain (http://www.youtube.com/watch?v=tAS5mjocjc8).

  Now, I bought Windows 7 Ultimate x 64 and I have a problem of anywhere, not allowed to find this gain program to install on Windows 7 x 64 with Toshiba and Internet sites I tested everything I think.

  Does anyone have the TEN sleep for Windows 7 x 64?
  I would ask for a link to this energy saving, this type of link (http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download)
  I know. I mean specifically the link if someone has and is so nice to share. Thank you! - .

  By downloading programs for TOSHIBA-Quad_Core_HD_Processor and generally of all programs of this silent Eve. file is probably derived from the c: \ Program Files-TOSHIBA-Quad_Core_HD_Processor_Demo thanks in advance

  Hello

  To be honest it of really difficult to understand what you are trying to install or what software you need.

  You said something about Toshiba Quad Core HD processor.
  Please note that not all notebooks Qosmio G50 are supported by this feature.
  It would be very interesting to know what you exactly G50 - xxx

  PS; European driver Toshiba page provides the drivers Win 7 for G50 as well.
  In order to use the Toshiba Quad Core HD processor, you will need to install the HD and HD Console processor driver as well.

  The HD in Toshiba CPU is a co-processor dedicated to streaming media of process (advanced such as the image processing and image real-time image recognition) and the Console HD from Toshiba displays usage for every heart of the HD from Toshiba processor and allows applications that use the processor HD must be started

• Update of the NXT software for windows 7?

  Absolute 100% beginner full here on Robots.

  Opens a NXT Mindstorms NXT kit (that I bought years ago but never opened) to start from scratch and learn.  Built the first model of robot 3 wheels and went to install the cd so I can plug the robot in my computer for what I assume is a certain type of download that will program the device to move (?) and the cd says it is only for Windows XP and I have Windows 7.  Thus, it will not install and so I'm stuck unless someone knows of a specific download that takes care of this, that is, for NXT v.1.1 but for WIndows 7 software.  Advice/help Plmk because I really want to get into this hobby, but I'm stuck here early!

  Thank you!!

  Thlorian,

  I was able to run the NXT 1.1 on Windows 7 Setup when forced to run in XP compatibility mode and run as administrator based on this Windows caring Page.

• How to restore the audio software for windows XP

  original title: Audio for windows XP software

  I must have accidentally uninstalled the program that runs the audio on my computer during the uninstallation of an another grosgrain. What should I do? I have absolutely no audio now! Is it possible I could still be on my computer somewhere? Is there a program I can dpwnload?

  I did this for your hardware in particular, from the Microsoft Update Catalog. Otherwise, he would never install them for you.

  The download link, then unzip it into a folder.

  Open Device Manager and right-click on this point, identical to the front. Choose update driver software.

  Browse my computer. Let me repeat. Have the disk. Browse.

  Find and double click on STWRT.inf in the extracted folder. Click ok then next and it will install.

  Updated link: https://rapidshare.com/files/452472406/SigmaTel_-_Audio_-_SigmaTel_High_Definition_Audio_CODEC.zip

  Enjoy.

• Software for Windows 7 where is it?

  The operating system is out and it is still a beta version of the software for printers. I had the driver works, but not of the printer for complete capable of using software. I see you advertise on the internet Windows 7, but still no software. What do you for Christmas? It's about 2 months away. As I said in another post that no one answers with good response, I got the driver to work. Still no software and I tried to install a software that is listed under Vista 64, but that's just errors out and cancelled the installation. It's really stupid that there is no word or whatever this so-called why HP has no date of availability of software or anything just a work-around that does not use the complete robot of the printer. WIndows Vista has the same use windows Fax and the printer in windows, but still does not all the features of the printer.

  Oh by the way I got the Officejet J3680 all-in-One.

  It is not for lack of Microsofts that you take your time to satisfy the consumers of your products. Its been about a week now after the release of Windows 7 and not a word about the software, but a few drivers. I probably still will not get the right answer with this post. Lack of communication at HP. You should be happy that I don't have a company according to the use of complete Betacam of this printer printer, because I would lose money waiting for you to do something. Do not give this speech "there is a solution. It does not solve that there is not a software for it.

  Message edited by Dustyshot on 27/10/2009 21:19
  Message edited by Dustyshot on 27/10/2009 21:23
  Message edited by Dustyshot on 27/10/2009 21:24

  Also the Wi - Fi guy telling me to wait until January 2010 is not a solution. A solution is to have the software ready to use. So I will not consider it all solved.

  Oh, I found my own solution. I remember that I bought another Deskjet f4400 printer and you have the software windows 7 for her. My mother used this one while I used the officejet j3680, so I went with her printers. It uses Vista, so now I have a fully functional recommended printer to use and she does too. I only will be absent the fax part, but that's fine. She wanted anyway the fax printer.

  Message edited by Dustyshot on 10/28/2009 12:21

• Upgrading software for windows 7

  I have a historical data base software that will run on Vista, but not on Windows 7. The company that produced it is more in existence, so I can't buy an upgrade. Would it be possible for someone to modify the program so that it would install on Win 7

  Moved Windows 7 installation, set at level and activate Forum.

  I have a historical data base software that will run on Vista, but not on Windows 7. The company that produced it is more in existence, so I can't buy an upgrade. Would it be possible to have a person to change the program so that it would install on Win 7

  Hello

  I'm sorry, but we cannot help you to modify a program (it is copyrighted).

  I suggest you watch this installation method of older programs;

  "Make older programs run in this version of Windows".

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  See you soon.

• is it possible to install a software for windows 7

  I bought a new laptop and im trying to install the software for my printer but it is not compatible with windows 8. Do I have to buy a new printer?

  I bought a new laptop and im trying to install the software for my printer but it is not compatible with windows 8. Do I have to buy a new printer?

  Hello

  If the manufacturer of the printer has no Windows 8 drivers available, you can try to install the latest drivers for Windows 7 by using Compatibility Mode.

  1. download the driver for Windows 7 and place it on your desktop.

  2. right click the driverinstallation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, select Windows 7.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator to install the driver.

  This still does not work with all hardware, but if this is the case, it will save you money.

  Concerning

• Qosmio G50 - Toshiba Quad-Core software for Windows 7 x 64.

  Hi all

  I have a request.
  I am the owner of the Toshiba Qosmio G50, I bought to running Vista ultimate x 86 and is the gain (http://www.youtube.com/watch?v=tAS5mjocjc8).

  Now, I bought Windows 7 Ultimate x 64 and I have a problem of anywhere, not allowed to find this gain program to install on Windows 7 x 64 with Toshiba and Internet sites I tested everything I think.

  Does anyone have the TEN sleep for Windows 7 x 64?
  I would ask for a link to this energy saving, this type of link (http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download)
  I know. I mean specifically the link if someone has and is so nice to share. Thank you! - .

  By downloading programs for TOSHIBA-Quad_Core_HD_Processor and generally of all programs of this silent Eve. file is probably derived from the c: \ Program Files-TOSHIBA-Quad_Core_HD_Processor_Demo thanks in advance

  Hello

  I'm afraid I n t m understand what you want to do or what you need.

  You need console HD software?
  The Console HD from Toshiba displays usage for every heart of the HD from Toshiba processor and allows applications that use the processor HD must be started.
  You can download it from the page of European driver of Toshiba.

  http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

  But note; not all Qosmio G50 are equipped with a HD processor!

  Please check first if your G50 is supported by the HD processor

  PS: what G50 - xxx you have exactly?

• HP Scanjet G4050 - where is the complete software for Windows 8.1?

  Where is the complete software and drivers for Scanjet G4050, for use with the Windows 8.1, 64-bit operating system?  I hate going back to have only the bare basic software and the functionality of the driver.

  Hello

  According to any documentaion, there should be a complete software functionality for Windows 8.1.

  I assumed that the full client software was wrongly not attributed to 8.1 Windows, I guess it should support it due the last date of update for this installation.

  I also tried to check by launching the installer... the system check was placed very well on Win 64-bit 8.1, without any error incompatibility...

  Try to install the software from the following link and check to see if that can help you:
  http://ftp.HP.com/pub/softlib/software12/COL53034/DP-127944-1/setup_full_G4050_14-5.exe

  Please let me know if this is useful,

  Shlomi

• Photosmart all-in-one software for windows 7

  Hello everyone,

  I just upgraded my PC HP Pavilion Media Center of Windows XP Media Center for Windows 7 Home Premium 64-bit.

  Update went well, but now I can not install the specific software for my printer HP C7280 all in one.

  Printer is on my home network, printer and PC are on the cable network and the PC sees the printer and can print to the printer.

  However I can't get the software to install on the PC from HP!

  Have tried in many ways, direct downloaded software, used HPPIW, also HP print and Scan doctor.

  Whenever I never go beyond the first part of the installation sequence.

  CAN ANYONE HELP?

  No need for that now, the problem is solved!

  I turned off the antivirus and firewall, then ran the uninstall04.bat file

  Then edited msconfig so I could start with a clean boot. Do you have a reboot

  So I ran the installer as admin and everything went through, with a few minor hicups, but he set himself in the end.

  This problem would not have occurred if I had installed the printer directly after the installation and update of Windows 7.

  I installed Mcaffee directly after Windows 7, but must have installed the HP software before McAffee.

  Thanks for your help, that it is appreciated, you are the only person who has responded to my post!

• Driver and software for Windows 8

  Anyone know where I can find the driver and the software for my printer Officejet 6500 has for Windows 8?

  At the moment there is no drivers currently available for Windows 8. Keep an eye on the forums that more information will be available.