Software HP Deskjet 960C

Similar Questions

• DeskJet 960C: will operate all modern HP printer with my system

  My Deskjet 960C died after fifteen years of trouble free service.  I have a Dell computer almost as old that works under Windows Vista. All modern HP ink jet work with this old set upward?  Product descriptions, all seem to be focusing on the use of phones moblie etc.  All I want a good reliable printer to use with my computer, so I am a little confused.

  New is not necessarily the same as the good.

  Dry the test of the task on the color cartridge.

  Take a white paper towel and incorporate a touch about four layers thick.

  Take the cartridge color over a sink, shake it go up and down several times we do this over a sink so ink that shakes will get them in the sink and we can rinse it.

  Pat dry the nozzles on the paper towel, you should get 3 lines of ink color, if you get only a magenta line, it's a bad cartridge or the muscles are just clogged.

  If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.

• Download software hp deskjet d4260 printer

  I have an apple laptop and you want to set up the printer above.

  HP has a download of software for apple computers so that I can use my deskjet d4260?

  If you would have told me your version of Mac OS X I could have pointed out it a more specific page.  This , you should get close.

• software printer deskjet 1280 for windows 7

  my windows 7 on my toshiba lap top will not find the updated software and will not find for deskjet 1200 either as other forums.

  How can I install the software and drivers for my printer deskjet 1280 on windows 7 64 bit.

  Please can someone help

  Hi StuartWallace777,

  Welcome to the Microsoft community. If I understand correctly, you need help to find the driver software for HP Deskjet 1280 Printer series. I've surely you will help find a solution on the issue.

  1. have you tried to download the driver from the manufacturer's Web site?

  2. you are trying to install the printer or repair? What exactly is the problem you are having?

  I suggest to refer to this article and select the operating system in the list.

  Download drivers and software

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=439174&lang=en&cc=us&prodTypeId=18972&prodSeriesId=439162&TaskID=135

  Hope this information helps. Please reply back with the State so that we can help you.

• Software HP Deskjet 6980 for Windows 7

  What is the complete package for my network printer HP Deskjet 6980 will be available for Windows 7 Pro 64 bit?

  Please let us know that you are looking for the solution full of Win7.

  The unfortunate situation with the Deskjet 6980 is it will be supported only by drivers HP published with the Windows 7 operating system.

  My personal opinion is that HP drivers published in the operating system Windows 7 has most of the features required for the full recommended print.
  General impression every day
  Photo - borderless printing
  Photo printing with white edges
  Impression of the presentation
  Print fast/Exonomical

  In addition, there are options for page scaling, selection of the status bar, dozens of selections of type of document (including automatic), real photos HP and other improvement.

  Here's the information to use this printer with the USB cable.

  Installation of the product with the USB cable and use the driver from Windows Update or driver

  I would like to have an answer that would be satisfactory.

  At least I wanted to provide you with confirmation that a complete solution is not expected.

  Message edited by SophiaS 12/01/2009 11:33

• HP deskjet 960C does not print color

  My printer goldie oldie suddenly decided to not print color since I plugged my new MacBook Pro.  When I used my old laptop from Apple, there is no problem.  I downloaded the driver (I hope that the right one) and replace the color cartridge.  What I am doing wrong?  Any ideas?

  WoooWhoo!

  I am happy to help and thank you for being a teacher. It's hard work, but so important.

  As the person who started this thread, you may have marked it solved by clicking to the right of your response, I think.

• my old hp deskjet 960C wants to be connected via the usb cable to my new computer (win7/64)

  I get the problem following-> https://plus.google.com/u/0/photos/110639603048308362977/albums/5834371600456502305/5834371603625453...

  can you help me, please?

  Hello ggamauf

  Follow the article below to solve the problem. It contains several possible solutions for the update of Windows 7 do not install the drivers.
  Update Windows 7 cannot install the driver

• DeskJet 960C has large amount of ink used, how to clean

  When changing to a black cartridge, I notice that on the right side of the printer, under where to park the heads, there is a huge backlog of old used ink. Everything I read tell me just to clean the cartridges and the birthplace, in that they are required and nothing else. But I think I'll eventually get a lot of smears. There are really a lot of goo out there!

  Y at - it guides to how to clean this area?

  The advice I would give - leave it alone.  The gas station is designed to hold the excess ink, and the movement of the capping station is designed to flatten the mound if it becomes too large.  It is best to leave the service area only to avoid damage and/or a mess.

  If the root ball is difficult to handle you can empty the mound of ink with a plastic spoon.  Be very careful not to drop it on the desktop, carpets or furniture.

  Often excessive ink in the service area is caused by the cleaning cycles too often running.  Cartridges 45 and 78 is rarely necessary to have a cleaning cycle run - usually less than once during the life of the cartridge.

  Another cause of excess in the gas station would be if an external switch is used to turn off the printer.  An example would be a Director of switch or power output.  This would cause an extra maintenance to occur when the printer is turned on.  In order to minimize maintenance using ink leave the printer plugged into an active outlet at all times and only use power switch of the printer to turn off the printer.

• Deskjet 960C printer problem

  This printer worked perfectly with my Windows 7 system until a few days ago.  Now, it takes about 15 minutes to print a page - even time if black and white or color.  I don't know where to start troubleshooting.  Would it be a of the automatic updates of the system which is at the origin of the printing problem?

  Thanks for any help.

  Try printing a test page by pressing the button resume 5 seconds. If this page is slow to, it might be a cartridge problem. Get out them of the printer and check the date on the cartridges.

• setting up 960C to a wireless deskjet

  I'm new to this forum and would be recognizing any help in the right direction. I just bought an edition four HP Pavilion DV7t and a model of wireless n Linksys WRT160N router. I set up my wireless network and it works very well. However, I would like to connect my HP deskjet 960C printer to the network but I don't know where to start. What do I need and what I need to re - configure the printer?

  Sorry, but your printer has USB connectivity only and your Linksys router does not have a USB port on the printer.  You can add a Linksys Wireless print server, but for the same or a little more money you could buy a printer wireless (with scanning and copying capacity).

  You're stuck with plug it into your computer.  If other computers want to share the computer with you, this is possible (with varying degrees of success).

  Real printers wireless (with scanners and photocopiers) are very cheap these days.  You want some recommendations?

• HP deskjet 3050 a j611 can not find the driver software when connected

  I tried to plug my new printer Hp deskjet 3050 a j611 range but can't get furthur than coonecting because it can not find the driver software. I had to download the driver software myself via this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=5061082& but once I downloaded that and is entered in the details of the wireless connection, it cannot find the driver software. I can't use the CD my drive is broken and I am awaitng delivery of an external in a few weeks, but I'd like to get my printer started. Help, please

  Hello Buzbybumble

  I looked into it further and found that all J611 Deskjet 3050 a models use the same software. So, you should be able to download and run the installation from the link below.
  Software HP Deskjet 3050 has complete features J611

  IMPORTANT: Make sure that the printer is not connected to the computer until the installation program ask you to do. Run the Setup and follow the instructions on the screen.

  If the printer is not yet seen, then choose the option "continue INSTALLATION WITHOUT CONNECTION NOW I WILL CONNECT the PRINTER LATER. A shortcut must be placed on your desktop and it will try to add a printer when it is executed.

• HP Deskjet 2645: 2645 HP scanning problem

  After upgrading to Win10, I can't perforom scan from the device control panel.

  The computer and recognized by the device (Picture1)

  

  However later on the (image2) error message appears

  

  The analysis can be performed on the computer, so it seems that all physical connections are clean.

  Thanks in advance

  Please come back to me @Boris-K.

  I checked with a colleague at work and manage to Scan option should be available to scan the computer. So it looks like not properly installed software because you are missing this option. You don't have to 'Manage the Fax settings' option that is available.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Unplug the USB cable and run the uninstall: uninstall the printer software (Windows).

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software: HP Deskjet Ink Advantage 2640 All - in - One Printer full feature software and drivers series.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.
  • Install the printer on this account.

  Let me know if that solves the problem. Thank you!

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• My laptop can not find my Deskjet 1050 has to scan a document, help!

  Hello

  My printer (HP Deskjet 1050 A) does not connect to my computer samsung laptop.

  IM using windows 7.

  I open the HP Printer Wizard and go to the tab at the top saying 'Print & Scan '.

  I then clicked on "Scan a document or photo" and my laptop comes with the message "The HP Deskjet 1050 J410 series was not found"

  The printer is connected to the electric network and is connected to my lapop via USB. I tried to print a document to check the connection and it prints well, I also scanned and printed using the printer functions and which also works fine.

  Help, please!

  Thank you very much in advance for your help and advice!

  Welcome to the forums of Lorna!

  I understand that you are unable to scan from your Deskjet 1050a however, you can print successfully. If the full version of the software is not installed, the scan function will not work.

  First of all, please running the full installation: software HP Deskjet full functionality and drivers

  You can also try to run the HP print and Scan Doctor to see if it will fix the problem of scanning. If there is a problem more serious that the tool cannot fix, it will warn you. Please let me know the results!

  Let me know how it works for you!

  Happy Friday

• HP deskjet D1520: incorectly color printing after changing the black ink

  I replaced my color ink the printer was working fine, then the necessary black replaced so I replaced that and now print colors turned off. I did a test on my computer. The upper part is the color on the screen, the bottom is the printed color. Help, please! I removed my devices, Cup of the printer and reconnected, then reinstalled and it still printed in this way.

  

  Hi @sadie731,

  Welcome to the HP Support forum.

  I understand that you have a HP Deskjet D1520 printer that prints wrong colors when sending your computer Windows 8 print jobs. I would like to help with that.

  Page 87 of the HP Deskjet D1500 Series user manual, providing the steps which can solve the problems of print like that quality.

  If it's a matter of print quality caused by the software and printer drivers. It would be better to completely uninstall the software and printer drivers. Here is a video that you can use to reference - uninstalling in Windows 8 HP printer drivers, if needed.

  Once uninstalled, you must reinstall the software and drivers. Here is a link to the page where you can start downloading - drivers and software HP Deskjet full functionality.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!