DeskJet 960C has large amount of ink used, how to clean

Similar Questions

• Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

  Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

  Hi @Valerie35,

  Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

  If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

  Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

  I hope this helps, let me know the result!

  Thank you

• Smart way to save large amounts of data using the circular buffer

  Hello everyone,

  I am currently enter LabView that I develop a measurement of five-channel system. Each "channel" will provide up to two digital inputs, up to three analog inputs of CSR (sampling frequency will be around 4 k to 10 k each channel) and up to five analog inputs for thermocouple (sampling frequency will be lower than 100 s/s). According to the determined user events (such as sudden speed fall) the system should save a file of PDM that contains one row for each data channel, store values n seconds before the impact that happened and with a specified user (for example 10 seconds before the fall of rotation speed, then with a length of 10 minutes).

  My question is how to manage these rather huge amounts of data in an intelligent way and how to get the case of error on the hard disk without loss of samples and dumping of huge amounts of data on the disc when recording the signals when there is no impact. I thought about the following:

  -use a single producer to only acquire the constant and high speed data and write data in the queues

  -use consumers loop to process packets of signals when they become available and to identify impacts and save data on impact is triggered

  -use the third loop with the structure of the event to give the possibility to control the VI without having to interrogate the front panel controls each time

  -use some kind of memory circular buffer in the loop of consumer to store a certain number of data that can be written to the hard disk.

  I hope this is the right way to do it so far.

  Now, I thought about three ways to design the circular data buffer:

  -l' use of RAM as a buffer (files or waiting tables with a limited number of registrations), what is written on disk in one step when you are finished while the rest of the program and DAQ should always be active

  -broadcast directly to hard disk using the advanced features of PDM, and re-setting the Position to write of PDM markers go back to the first entry when a specific amount of data entry was written.

  -disseminate all data on hard drive using PDM streaming, file sharing at a certain time and deleting files TDMS containing no abnormalities later when running directly.

  Regarding the first possibility, I fear that there will be problems with a Crescent quickly the tables/queues, and especially when it comes to backup data from RAM to disk, my program would be stuck for once writes data only on the disk and thus losing the samples in the DAQ loop which I want to continue without interruption.

  Regarding the latter, I meet lot with PDM, data gets easily damaged and I certainly don't know if the PDM Set write next Position is adapted to my needs (I need to adjust the positions for (3analog + 2ctr + 5thermo) * 5channels = line of 50 data more timestamp in the worst case!). I'm afraid also the hard drive won't be able to write fast enough to stream all the data at the same time in the worst case... ?

  Regarding the third option, I fear that classify PDM and open a new TDMS file to continue recording will be fast enough to not lose data packets.

  What are your thoughts here? Is there anyone who has already dealt with similar tasks? Does anyone know some raw criteria on the amount of data may be tempted to spread at an average speed of disk at the same time?

  Thank you very much

  OK, I'm reaching back four years when I've implemented this system, so patient with me.

  We will look at has a trigger and wanting to capture samples before the trigger N and M samples after the outbreak.  The scheme is somewhat complicated, because the goal is not to "Miss" samples.  We came up with this several years ago and it seems to work - there may be an easier way to do it, but never mind.

  We have created two queues - one samples of "Pre-event" line of fixed length N and a queue for event of unlimited size.  We use a design of producer/consumer, with State Machines running each loop.  Without worrying about naming the States, let me describe how each of the works.

  The producer begins in its state of "Pre Trigger", using Lossy Enqueue to place data in the prior event queue.  If the trigger does not occur during this State, we're staying for the following example.  There are a few details I am forget how do ensure us that the prior event queue is full, but skip that for now.  At some point, relaxation tilt us the State. p - event.  Here we queue in the queue for event, count the number of items we enqueue.  When we get to M, we switch of States in the State of pre-event.

  On the consumer side we start in one State 'pending', where we just ignore the two queues.  At some point, the trigger occurs, and we pass the consumer as a pre-event.  It is responsible for the queue (and dealing with) N elements in the queue of pre-event, then manipulate the M the following in the event queue for.  [Hmm - I don't remember how we knew what had finished the event queue for - we count m, or did you we wait until the queue was empty and the producer was again in the State of pre-event?].

  There are a few 'holes' in this simple explanation, that which some, I think we filled.  For example, what happens when the triggers are too close together?  A way to handle this is to not allow a relaxation to be processed as long as the prior event queue is full.

  Bob Schor

• DeskJet 30504: Deskjet 3050 has Wirless and I cannot use it because I don't get reception

  I have a Deskjet 30504 and I'm not able to update because the wireless router does not receive any reception. I pulled with Windows10 I hate, but that is besides the point.

  USB cables did not come with this printer. Is there anyway that I can update the printer without using Wireless? I think that for HP to design a product that can be updated ONLY by using wireless is incredibly stupid. The printer has been a gift, and now I can't update it.

  Please notify.

  Sincere greetings,

  Antigone1998

  Buy a printer USB cable and connect via USB and update your printer.

• Since the worm 13 loading toolbar buttons are 3 times the size they were and now pronounce on the large amount of display. How to reset the?

  toolbar buttons are 3 times the height, they need to be. How can I fix them.
  I tried to include a screenshot to illustrate, but it won't let me.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in additional posts.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to reset Firefox with a new profile.

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• Issue - separate from white background symbol, but now it has bits to the left. How to clean?

  I have a symbol on white background shot photo. I don't know how I did it, but I separated the symbol of the white background. but now I have all these bits around the edges left over that are white and I don't know how to clean it. I tried gum, I tried paint on it, I tried selecting to cut or delete. not one of those things worked. does anyone have the answer?

  Thank you

  Whitefox42

  Thank you very much. I was so frustrated.

  Whitefox42

• Update of Microsoft using large amounts of resources

  I have 2 computers with Microsoft update by using a large amount of RAM.  Wuauclt.exe and svchost.exe eat so much memory that do not complete the updates.  This happened for a few weeks and have just been told.  I have reset the updates that did not help.  I disabled Microsoft Updates which seems to fix the problem.  A system has 512 MB of RAM and Norton AV, the other has 1 GB of RAM and NOD32.

  Hi Chris,

  Method 1:

  First of all I suggest you enable Microsoft Updates for your computer. An analysis online for your computer from the link given below, because this can be a problem if your computer is infected by viruses or malware.

  http://OneCare.live.com/site/en-us/default.htm

  Method 2:

  In addition, would suggest you use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747/en-us

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AppleMobileDeviceService.exe use a large amount of memory

  Original title: Applemobiledeviceservice.exe

  I am running XP Professional and have installed MSE on the computer as my antivirus software.  I have 2 GB of memory and has recently added SpeedyPC Pro to improve performance. Today my PC was slow and open the Task Manager and saw that applemobiledeviceservice.exe used a large amount of memory.  I think my daughter has added years back, but she no longer uses this computer.  Do I need?  If this is not the case, how can I remove it?

  See you soon

  SpeedyPC... what a scam.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• 3000N200 R & R backup takes hours and using the large amount of disk space. Can anyone help?

  The weekly backup of Rescue and Recovery has suddenly started to take hours when I haven't changed anything and uses a large amount of hard disk space. I tried to remove some previous backups and it and it seemed to work OK and then all of a sudden decides to do the same thing. I tried a previous restore point and it helped for a while and now just made a backup taking 4 hours and 20 GB of hard drive space. It is a fault and has nothing to do?

  
  

• HP Deskjet 3055 has. Unable to see the balance of the ink in the cartridges

  I have HP Deskjet 3055 has (3050 all-in-One series of J611). So far, when I clicked on the HP icon on my desktop I have learned how much ink is left in my cartridges. Now I can't learn this - all I can learn from the icon is the current position of any current print job. Also, I used to be able to order the new printing caridges via my HP icon - I think that it is now not possible. What is the answer. I had thought to unplug the printer and then reinsert new with the original CD. This seems a radical step but is it the solution?

  Hello pm1810,

  Welcome to the HP Forums!

  I understand that you are unable to see the ink levels using the HP icon on your desktop. I will do my best to help you! What is your operating system on your computer? Click here to read: Windows.

  When you click on the HP icon on your desktop, is it called the wizard of the printer? How is the printer connected? USB or wireless?

  If you are referring to the Printer Wizard and you are unable to access to the 'estimated ink levels' and a 'supplies shop online', then I recommend you to uninstall the software:

  Please follow this HP document uninstalling the software of the printer. (If this printer is connected by a USB cable, then disconnect the power cord from your computer.) Be sure to choose your appropriate operating system. Then, please clean the Temp folder on your computer. I'll give you a document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system. If you are still having the same problem, could you please send a page on this post.

  Impatience on your part have a beautiful day!

• Want to 110 printer using a huge amount of ink

  Hello

  I recently bought a printer Envy 110 and since buying it I printed only 374 pages but I used five black and three color cartridges! For me it's huge, especially when they cost $25 each for standard size and twice for the extra-large size. I print in project most of the time, and I print only best quality when I have to. I do not print pictures in color, items or powerpoint presentations, I did once and it was as if you could watch the ink flow out of the cartridge!

  Is this suppose to use much ink? I would never buy this product if I knew it was going to be this thirst for ink.

  Can you please make some suggestions to help reduce the amount of ink that I use or y at - it something wrong with my printer? Thank you.

  My only suggestion would be to contact the HP Support at 1.800.474.6836.  As you bought the printer 2 months ago, it should still be under warranty.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• consent.exe use a large amount of processor (30 to 50%)

  OS: Vista Service Pack
  I have a Vista laptop newly imaged. I have at least once a week have a process called consent.exe extreme amounts of processor use.  Usually 30% to 50%.

  Everything I read says this process belongs to the UAC, but doesn't give any advice on how which they tweeked it.

  I believe that the problem could be linked to the army Gold Master CD. This military software add on seems to have problems. That said a lot of people on the internet have this problem with the help of the master of gold army.

  I realized what it was.  I uninstalled Dameware and reinstalled.

• How to replace ink cartridges hp deskjets 3050 has

  need to replace printers inkjet on hp deskjet 3050

  (new forum HP)

  Welcome to the forum, Griff.

  Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

  HP Deskjet 3050 has e-All-in-One Printer - cartridges

  The document includes a video to explain the procedure.

• manually clean the printheads for deskjet 3050 has

  DeskJet 3050 a not print not tried red heads ink level four times cleaning is ok and the use of hp ink cartridges

  Hello fred1934,

  Welcome to the Forums of HP Support!

  I see that you can not print red with your Deskjet 3050 has, you ran the print head cleans several times, but it does not help. Try using the manual procedure in this guide: "Incompatible print cartridge" or "Print Cartridge problem" Message appears on the computer or the printer control panel, three Solution.

  Hope this helps,