Software stop working after the subscription period

Similar Questions

• Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Sounds like a conflict. What else is in course, including plugins ID third-party programs or utilities that run in the background on the Mac?

  Also, have you tested in a new user?

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Digital Persona software stops working on the Pavilion dv8-1250ea

  Hello!

  I noticed that Digital Persona, the software for the JJUJ scanner integrated on my HP Pavilion dv8-1250ea stops working whenever the laptop wakes from standby or hybernation mode. On the login screen, the icon on the right referring to the fingerprint reader warning flashing at a rate of about twice a second and the following note says "fingerprint reader not detected". So I'll type the password manually, but the cursor in the field password prevents jump at the beginning of the field at the same pace, and it seems as if there is a current discount. The only way to log is press the 'end' key immediately before each character in the password, which is a disappointment.

  I recently downloaded an update for Digital Persona, but it has not solved the problem.

  Any ideas how to fix? Thanks in advance!

  Andrey

  Here is a work around, see if it works... You will need to go to Device Manager, depending on what hardware you have; AuthenTec orvalidity... Double-click on it... who will launch the Properties Windows... Click on tab power management... this tab, uncheck the box that reads "allow the computer to turn off the device to save power"... and see if it works... ' "

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• All Creative Cloud software has stopped working after the upgrade to Windows 10

  So... earlier this week, I upgraded my computer from Windows 8.1 for Windows 10, in which I had installed CC of Photoshop, Illustrator CC and first Pro CC from the creative cloud application, all versions of 2015. They were all working well.

  Then, after the upgrade, none of them work. I tried to delete it, follow these instructions: use of the Adobe Creative Cloud cleaning tool to resolve installation issues , but no progress.

  I have error message seems to be exactly the same as in this post: Adobe Illustrator CC 2015 does not launch on Windows Pro 10

  But their solution was a reinstallation of the system, which I just can't do it right now.

  You may wonder that Windows 10 is the problem, but I did exactly the same thing on my phone 3 weeks ago. And it worked fine! (the only difference is that I had CS6 and after upgrading Windows 10 CC)

  Screenshots:

  

  

  

  This error happens (right) too, but I accidentally ticked the box "don't show me": ins.png https://forums.adobe.com/servlet/JiveServlet/showImage/2-7823824-798279/AI-CC19-Error-Plug

  If it does not work. You can try to uninstall and reinstall Microsoft redistributable packages of 2013 and 2012 versions.

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WVC80N hangs or stops working after a short period of time

  Hey there,

  I created my WVC80N yesterday.  Went to a couple came back, he was frozen, no new video.  He did this ever nonstop.  I had to reboot the computer to make it work again. Obviously a big problem, but one that I hope there is a fix for or can I do something wrong.

  I use win 7 and tried both the software supplied with the cam and webcam xp5, they both lose the connection with the cam after a short period of time.

  Thanks for any help on this one,

  CR

  @crjb1, have you got it working under Linux?  I tried for about a week without result.  I noticed that Linksys-Cisco offers a GPL had driver/module for the wvc54gc, but not for the wvc80n.  Maybe I would have thought a little before you get all excited and buying this.

  The video quality when connecting to the web server of the camera is fine, but I can't get a stream using zoneminder video or else and the RTSP protocol feed doesn't seem to work at all.

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Illustrator CC has stopped working (after the last update)...

  Hello

  I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

  Any help please? Thank you.

  --

  Windows 8, Version 6.3 (Build 9600)

  Name of the failing application: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Name of the failed module: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Exception code: 0xc0000005

  Offset: 0x000000000013920a

  Process ID vulnerabilities: 0x3d8

  Start time of application vulnerabilities: 0x01cfe32da5a29313

  The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

  Faulting full name of the package:

  Hi Sumit,

  Thanks for your quick response.

  No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

  Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

  I'll install the Wacom tablet program later. I suspect that it will be fine.

  Thank you.

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.